Operation Manual

78
Chapter 7
Using the AV Source (Pioneer AV Equipments) AV
Setting the announcement sup-
port interruption
1 Touch “AS” in the FUNCTION menu.
2 Touch “ANNOUNCE” or “WEATHER” to
turn the selected announcement support
interruption on.
Touching “ANNOUNCE” or “WEATHER”
switches between “ON” and “OFF”.
Receiving the road traffic flash and
transport flash
1 Press TA/NEWS button to turn road traffic
flash and transport flash on.
or appears in the display.
To turn the road traffic flash and transport
flash off, press TA/NEWS button again.
2 Press TA/NEWS button while the road
traffic flash and transport flash are being
received to cancel the announcement
interruption.
Receiving news flash
1 Press TA/NEWS button and hold to turn
news flash on.
Press TA/NEWS button until or
appears in the display.
To turn news flash off, press TA/NEWS but-
ton and hold again.
Selecting services from the
available service list
Available service list lets you see the list of availa-
ble services and select one of them to receive, if
the currently received ensemble has multiple
services.
1 Touch “AS LIST” in the FUNCTION menu.
2 Touch or to switch between the lists
of available services.
3 Touch your favourite available service on
the list.
That selection will begin to be received.
Searching for service by availa-
ble PTY information
Available PTY search lets you see the list of avail-
able PTYs in the current ensemble and select one
of them to receive.
• If there is no available PTY in the current
ensemble, you cannot switch to the available
PTY search mode.
• Available PTY search is different from PTY
search. With navigation unit, you can operate
only the available PTY search.
1 Touch “PTY SEARCH” in the FUNCTION
menu.
2 Touch or to switch between the lists
of available PTYs.
3 Touch your favourite available PTY on the
list to begin the PTY search.
DAB receives the desired PTY service.
❒ The PTY method displayed is narrow. The
wide method cannot be selected when
using DAB as source.
❒ If no service broadcasting the selected pro-
gramming type is found, NOT FOUND is
displayed for about two seconds and then
the DAB returns to the previous service.
Switching primary or secondary
service component
1 Touch “PR/2nd” in the FUNCTION menu.
2 Touch 

or 

to select the desired service
component.
Switching the service follow
1 Touch “SF” in the FUNCTION menu.
Touching “SF” switches between “ON” and
“OFF”.
Using dynamic label
Displaying dynamic label
➲ Switching screen display ➞ Page 92
Storing and recalling dynamic label
You can store data from up to six dynamic label
transmissions at touch keys 1 — 6.
DAB