User manual
55
Chapter 5 Customizing Your Navigation SystemNAVI
Chapter 5
Customizing Your Navigation System
• For safety reasons, these functions are not
available while your vehicle is in motion.
To enable these functions, you must stop
in a safe place and put on the parking
break before setting your route.
Modifying the Default Settings
You can tailor default settings such as navigation
functions and information display for ease of use.
The following example describes how to change
settings. In this example, the “KM/Mile Setting”
settings is set to “Mile & Yard”.
1 Touch “Settings” in the Main menu.
The Settings menu appears.
2 Touch “Next”.
The screen changes. “Mile” is displayed
below “KM/Mile Setting”, indicating that
this function is currently set to “Mile”.
❒ When you touch items with a setting below
them, their setting changes. When you
touch items with no setting below them, a
setting screen appears.
❒ Touching “Next” or “Previous” changes
the screen and displays another item.
3 Touch “KM/Mile Setting”.
“Mile & Yard” is displayed below “KM/Mile
Setting”, indicating that “KM/Mile Setting”
is set to “Mile & Yard”.
If you want to change another setting, select
the item you want to change and repeat the
procedure in step 3.
Items Users can Change
This section describes the details of the setting
for each item. Settings marked with an asterisk
(*) show that they are default or factory settings.
Return Home
➲ Registering and changing your home location
➞ Page 45
Go to
➲ Registering and changing your favorite loca-
tion ➞ Page 45
Set Memory Area
The memory area is the area in the map, which is
being read in advance for the memory navi mode.
Approximately a 7.5 mile perimeter with the
selected location at the center is read into the
memory.
Indicate the map you want to store in the memory
by touching
,
,
or
. Then, adjust the map
scale to the one you desire, and touch “OK”.
Continuously touching
,
,
or
allows you
to rapidly scroll the map screen.
❒ An area not stored in the disc cannot be
memorized.