User manual

50
Chapter 4
Editing the Navigation Utilities NAVI
5 Scroll the map, adjust the position of the
red frame, and touch “OK”.
If you want to stop registration, touch “Back”.
❒ Depending on the setting of route search con-
ditions, you may not be able to avoid the spec-
ified areas. The confirmation message is
displayed on the screen at this time.
➲ Information on route calculation conditions ➞
Page 40
Changing or deleting an Area to
Avoid
You can subsequently change/rename/delete an
Area to Avoid.
1 Touch “Route Options” in the Main menu,
then touch “Designate Areas to Avoid”.
2 Select the area you want to change or
delete.
3 Select the desired operation.
On this screen, you can select the following
options:
Rename :
Changes the name. Enter the new name and
touch “OK”. This returns you to the Route
Options menu.
Change :
A specified area can be changed. For the next
steps, see Step 3 in the “Registering an Area
to Avoid” above.
Delete :
Delete the selected Area to Avoid.
Changing Background Picture
In the menu operation screen, you can indicate a
picture you like on the background. Some pic-
tures are already stored, but you can also use pic-
tures (JPEG format data) created by a personal
computer or a digital camera. If you save the pic-
tures to a CD-R (or CD-RW), you can use them as
background pictures. The following two types of
background pictures can be changed:
• AV Background : Background for the screen
during the operation of audio, or during play-
back.
• Navigation Background : Background of
navigation menu screen.
Several background pictures are stored in the
Pioneer DVD map disc. If you want to use these
pictures, insert the Pioneer DVD map disc.
Here, a method of changing background picture
is described with an example of loading the pic-
ture stored on a CD-R (-RW) onto the navigation
system as the background picture.
❒ When storing original pictures on a CD-R (-
RW), create a folder named “BG” in a CD-R (-
RW), and store the picture files in this folder.
Up to 20 picture files can be used in the BG
folder.
❒ When creating a “Background Picture Set-
ting” CD-R (-RW) for changing the navigation
unit background picture, make sure the total
data size of the CD-R (-RW) is greater than
100MB. However, you cannot use a CD-R (-
RW) containing MP3 files or the Audio data
part (CD-DA session) for the “Background
Picture Setting” function.
1 Insert a CD-R (-RW) to the disc loading
slot.
2 Touch “Settings” in the Main menu, then
touch “Background Picture Setting”.
The picture selected for each screen is indi-
cated on the right side of “AV Background”
and “Navigation Background” items.