Operation Manual

1 Touch [Screen Calibration] on the “Sys-
tem Settings” menu.
A message confirming whether to start the ca-
libration appears.
p You can also start the calibration by keep
pressing MENU button on the “Top Menu”.
2 Touch [OK].
3 Touch and hold the arrows that point
to the center and corners of the LCD
screen.
The arrow indicates the order.
4 Touch anywhere on the screen.
The adjusted position data will be saved.
p Do not turn off the engine while saving the
adjusted position data.
5 Touch [OK].
Adjusting the screen brightnes s
“Brightness” modifies the black level of the
screen.
1 Touch [Picture Adjustment] on the “Sys-
tem Settings” menu.
= For details, refer to Displaying the “System
Settings” menu on page 88.
2 Touch [+] or [-] to adjust the brightness.
Each time you touch [+]or[-] increases or de-
creases the level. 10 to 01 is displayed as the
level is increased or decreased.
3 Touch
to return to the previous
screen.
p You can also start the adjustment by keep
pressing MAP button.
Setting the power-saving function
You can select the setting of automatic sus-
pend and the power-saving feature of the
screen backlight to save the battery power.
1 Touch [Power Management] on the
“System Settings” menu.
= For details, refer to Displaying the “System
Settings” menu on page 88.
2 Touch the desired key to change the
setting.
Available options;
! “Auto Power Off”
Enables you to set the automatic suspend
of the system.
[Never]:
Deactivates the automatic suspend func-
tion.
[10 min]:
Suspends the system automatically if you
do nothing for 10 minutes.
Customising preferences
Engb
91
Chapter
13
Customising preferences