Installation Guide

Concealing the metal brackets
Use the supplied self-adhesive sheets to hide
the metal brackets inside that are visible from
the front panel slits.
Self-adhesive sheet
(4 pcs.)
1 Peel the release paper off the sheets.
2 Attach the sheets at the top and bot-
tom on both sides of the panel as illu-
strated below.
Fixing the detachable device
A fixing screw is used for the in-store display.
Fixing screw
(1 pc.)
1 Remove the side brackets.
Loosen the screws to remove the side brack-
ets.
2 Fix the detachable device to the head
unit using the fixing screw.
3 Reattach the side brackets and tighten
the screws.
Engb
13
English
Section
04
Installation