Operation Manual

4 Touch [All].
Clears all learning statuses.
p Touch [All] for the following cases:
! After changing the installation position
of the navigation system
! After changing the installation angle of
the navigation system
! After moving the navigation system to
another vehicle
# Touch [Distance].
Clears the learned results stored in [Distance].
p When the distance accuracy is low, touch
[Distance].
Using the “Fuel cons.” function
Inputting the fuel consumption
information for calculating the
fuel cost
You can estimate the fuel cost to your destina-
tion by entering the fuel consumption informa-
tion in the navigation system.
= For details, refer to Setting a route to your
destination on page 38.
1 Display the “Navi Settings” screen.
= For details, refer to Displaying the “Navi
Settings” screen on page 116.
2 Touch [Fuel cons.].
The “Fuel Mileage Setting” screen appears.
3 Enter the fuel consumption informa-
tion.
Enter the following items:
! Surface Road Fuel Mileage:
Enter the fuel cost when you drive on ordin-
ary roads.
p How the fuel cost is entered depends on
the “Fuel Unit” setting.
— When “Fuel Unit” is set to “Litre”.
Enter how much fuel you need to tra-
vel 100 kilometres (60 miles).
— When “Fuel Unit” is set to “Gallon”.
Enter how many kilometres (miles)
you get to a gallon.
! Motorway Fuel Mileage:
Enter the fuel cost when you drive on the
motorway.
p How the fuel cost is entered depends on
the “Fuel Unit” setting.
— When “Fuel Unit” is set to “Litre”.
Enter how much fuel you need to tra-
vel 100 kilometres (60 miles).
— When “Fuel Unit” is set to “Gallon”.
Enter how many kilometres (miles)
you get to a gallon.
! Fuel Price Per Unit:
Enter the fuel unit price.
! Fuel Unit :
Set the fuel unit.
! Currency:
Set the unit of currency.
When all the items are entered, inputting the
fuel consumption information is complete.
Engb
118
Chapter
26
Customising preferences