User manual

JT
1 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
2 Touch ["#()B;847()7<<L9GJ].
3 Touch [&3G(DB8C38>L9G] to select the USB port
you use.
4 Tune into the broadcast station.
 Refer to Radio on page 35
5 Touch the song information.
The information on the song on air is stored in this product.
When the information is acquired,
turns off and is
displayed.
p
The song information for up to 50 songs can be stored in this
product.
6 Connect your iPod.
The song information is transferred to your iPod.
p
When your iPod is already connected, the song information
will be transferred directly to your iPod every time you touch
the song information.
Selecting&the&video&for&the&rear&
display
You can choose either to show the same image as the front
screen or to show the selected source on the rear display.
p
Video files on the external storage device are not available as
a source for the rear display when ["::F7(0381F3O] is acti-
vated in [)638<:HB97()7<;:].
p
Video files on the external storage device are not available as
a source for the rear display when ["9>8BL>(";<B] is acti-
vated in [)638<:HB97()7<;:].
1 Display the AV source selection screen.
HOME
2 Touch [-738].
3 Touch the source you want to show on the rear
display.
 ,L88B8
The video on the front screen of this product is output to the
rear display.
— Not all videos or sounds can be output to the rear display.
 E#ET0E
The video and sound of a disc are output to the rear display.
— Compatible video types are DVD-V, Video-CD, DivX, MPEG-
1, MPEG-2, and MPEG-4 only.

/)2TL1B>a
The video and sound of the USB storage device or iPod are
output to the rear display.
— The port that supports the rear display will only be USB
port 1.
— Compatible file types are MPEG-4, H.264, WMV, MKV, and
FLV only.

)B;847('DD
Nothing is output to the rear display.
2DSSHMFÐSGDÐ@MSHSGDESÐETMBSHNM
You can set a password for this product. If the back-up lead is cut
after the password is set, this product prompts for the password
at the time of next boot up.
Important
If you forgot your password, contact the nearest authorized
Pioneer Service Station.
Setting&the&password
1 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
2 Touch
1
, followed by
2
, and then touch and
hold
3
.
12
3
3 Touch [)7<(13JJCB8>].
4 Enter the password.
p 5 to 16 characters can be entered for a password.
5 Touch [%B].
6 Enter a password hint.
p Up to 40 characters can be entered for a hint.
7 Touch [%B].
p If you want to change the password currently set, enter the
current password and then enter the new one.
8 Check the password, and then touch ['K].
Deleting&the&password
The current password and password hint can be deleted.
1 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
2 Touch
1
, followed by
2
, and then touch and
hold
3
.
 Refer to Setting the password on page 63.
3 Touch [0F738(13JJCB8>].
4 Touch [*7J].
5 Touch ['K].
6 Enter the current password.
7 Touch [%B].
A message indicating that the security setting is cancelled
appears.
Restoring&this&product&to&the&
default&settings
You can restore settings or recorded content to the default
settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
p Some of the settings and recorded contents will not be reset.
Method 2: Restore the default settings from the
“System” menu
 Refer to Restoring the default settings on page 64.
Method 3: Press the RESET button
 Refer to Resetting the microprocessor on page 4
p
Some of the settings and recorded contents will not be reset.
!"#$%&''()*"+
Other5functions