User manual

J(
the targets that the “&H767” settings are exported to or
imported from is as follows:
1
USB storage device (USB port 1)
2 USB storage device (USB port 2)
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
Exporting&“Theme”&settings
1 Set the external storage device.
 Refer to Plugging and unplugging a USB storage device on
page 5
2 Display the “&H767” screen.
 Refer to Displaying the “&H767” setting screen on page 59
3 Touch [+M:B8<].
4 Touch the item you want to export.
The following items are available:
$FF;6L93<LB9, &H767, ):F3JH()48779, )7F74<("FF
5 Touch [+M:B8<].
Importing&“Theme”&settings
1 Set the external storage device.
 Refer to Plugging and unplugging a USB storage device on
page 5
A message confirming whether to import the stored setting data
appears.
2 Touch [$6:B8<].
Setting&up&the&video&player
Settings other than “ELNgi(#'E” are effective only when
the DVD player (sold separately) is connected.
This setting is available only when “ELJ4” is selected as the
source.
#HROK@XHMFÐSGDÐj#5##HU7Ð2DSTOkÐ
screen
1 Press the .',+ button.
2 Touch , and then .
3 Touch [E#ETELNg()7<;:].
2DSSHMFÐSGDÐSNOOQHNQHSXÐK@MFT@FDR
You can assign the top-priority language to the top-priority subti -
tle, audio and menu in initial playback. If the selected language
is recorded on the disc, subtitles, audio and menu are displayed
or output in that language.
1 Display the “E#ETELNg()7<;:” screen
 Refer to Displaying the “E#ETELNg()7<;:” screen on page
60
2 Touch [);R<L<F7(?39G;3G7], [";>LB(?39G;3G7]
or [,79;(?39G;3G7].
3 Touch the desired language.
When you select “'<H78J”, a language code input screen is
shown. Input the four-digit code of the desired language then
touch
.
p
You can switch the language by touching the switch lan-
guages key during playback.
p
The setting made here will not be affected even if the lan-
guage is switched during playback using the appropriate
key.
Setting&the&angle&icon&display
The angle icon can be set so it appears on scenes where the
angle can be switched.
The default setting is “'9”.
1 Display the “E#ETELNg()7<;:” screen
 Refer to Displaying the “E#ETELNg()7<;:” screen on page
60
2 Touch [,;F<L("9GF7] to switch “'9” or “'PP”.
Setting&the&aspect&ratio
There are two kinds of displays. A wide screen display has a
width-to-height ratio (TV aspect) of 16:9, while a regular display
has a TV aspect of 4:3. If you use a regular rear display with a TV
aspect of 4:3, you can set the aspect ratio suitable for your rear
display. (We recommend use of this function only when you want
to fit the aspect ratio to the rear display.)
The default setting is “abXj”.
1 Display the “E#ETELNg()7<;:” screen
 Refer to Displaying the “E#ETELNg()7<;:” screen on page
60
2 Touch [&#("J:74<].
3 Touch the item.
 abXj: Displays the wide screen image (16:9) as it is (initial
setting).

?7<<78(2BM: Makes the image in the shape of a letterbox with
black bands on the top and bottom of the screen.

139()439: Cuts the image short on the right and left sides of
the screen.
p
When playing discs that do not have a panscan system, the
disc is played back with “?7<<78(2BM” even if you select the
“139()439” setting. Confirm whether the disc package bears
the
mark.
p The TV aspect ratio cannot be changed for some discs. For
details, refer to the disc’s instructions.
Setting&parental&lock
Some DVD-Video discs let you use parental lock to set restric-
tions so that children cannot watch violent or adult-oriented
scenes. You can set the parental lock level in steps as desired.
p
When you set a parental lock level and then play a disc fea-
turing parental lock, code number input indications may be
displayed. In this case, playback will begin when the correct
code number is input.
1 Display the “E#ETELNg()7<;:” screen
 Refer to Displaying the “E#ETELNg()7<;:” screen on page
60
2 Touch [13879<3F].
3 Touch [e] to [j] to input a four-digit code
number.
4 Touch .
Video5settings
!"#$%&''()*"+
7KHPHPHQX Video5settings