User manual

GJ
Displaying&the&“Audio”&setting&
screen
1 Press the .',+ button.
2 Touch , and then .
4RHMFÐE@CDQA@K@MBDÐ@CITRSLDMS
1 Display the “";>LB” setting screen.
 Refer to Displaying the “";>LB” setting screen on page 56
2 Touch [D3>78T23F3947].
p Only the balance can be adjusted when “'9” is selected in
“-738():73578”. Touch [23F3947] and skip to step 4.

Refer to Setting the rear speaker output on page 56.
3 Touch or to adjust the front/rear speaker
balance.
p Set “D8B9<” and “-738” to “e” when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.

You can also set the value by dragging the point
on the displayed table.
2VHSBGHMFÐRNTMCÐLTSHMF
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone or smartphone application volume when the
navigation outputs the guidance voice.
The default setting is “"&&”.
1 Display the “";>LB” setting screen.
 Refer to Displaying the “";>LB” setting screen on page 56
2 Touch [,;<7(?7N7F].
3 Touch the item.
 "&&:
The volume becomes 20 dB lower than the current volume.

,;<7:
The volume becomes 0.

'PP:
The volume does not change.
Adjusting&source&levels
)?" (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p
Settings are based on the FM tuner volume level, which
remains unchanged.
p
This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source.
2 Display the “";>LB” setting screen.
 Refer to Displaying the “";>LB” setting screen on page 56
3 Touch [)B;847(?7N7F(">h;J<78].
4 Touch or to adjust the source volume.
p If you directly touch the area where the cursor can be moved,
the )?" setting will be changed to the value of the touched
point.
p
“@c” to “Ac” is displayed as the source volume is increased
or decreased.
p
The default setting is “e”.
Setting&the&rear&speaker&output
A rear speaker output of this product can be turned on or off.
The default setting is “'9”.
1 Display the “";>LB” setting screen.
 Refer to Displaying the “";>LB” setting screen on page 56
2 Touch [-738():73578] to switch “'9” or “'PP”.
p If “'PP” is selected, the rear speaker adjustment is not availa-
ble in “):73578(?7N7F”, “&L67("FLG9679<” and “08BJJBN78”.
Setting&the&subwoofer&output
This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
The default setting is “'9”.
1 Display the “";>LB” setting screen.
 Refer to Displaying the “";>LB” setting screen on page 56
2 Touch [);RCBBP78] to switch “'9” or “'PP”.
p If “'PP” is selected, the rear speaker adjustment is not availa-
ble in “):73578(?7N7F”, “&L67("FLG9679<” and “08BJJBN78”.
Adjusting&the&cu toff&frequency&
value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
D8B9<, -738, );RCBBP78
p
“-738” is available only when “-738():73578” is set to “'9”.

Refer to Setting the rear speaker output on page 56
p
“);RCBBP78” is available only when “);RCBBP78” is set to
“'9”.

Refer to Setting the subwoofer output on page 56
1 Display the “";>LB” setting screen.
 Refer to Displaying the “";>LB” setting screen on page 56
2 Touch [08BJJBN78] or [);RCBBP78()7<<L9GJ].
3 Touch [<] or [>] to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the
cutoff slope.
p The following items can also be set.

⁂⁚⁓⁥⁗
:
Switches the subwoofer phase between normal and reverse
position.

?1D/.1D:
Switches the ?1D/.1D setting to “'9” or “'PP”.
When it is turned off, the high-pass filter or low-pass filter of
each speaker can also be turned on by touching the graph
lines.
Selecting&the&listening&position
You can select a listening position that you want to make as the
centre of sound effects.
The default setting is “'PP”.
1 Display the “";>LB” setting screen.
 Refer to Displaying the “";>LB” setting screen on page 56
2 Touch [?LJ<79L9G(1BJL<LB9].
3 Touch the desired position to change the lis-
tening position.
The following items are available:
'PP, D8B9<W?, D8B9<W-, D8B9<, "FF.
Audio5adjustments
!"#$%&''()*"+
Audio5adjustments