User manual

G,
Updat ing&the&vehicle&adapter&
ÆQLV@QD
CAUTION
 The external storage device for updating must contain only
the correct update file.

Never turn this product off, disconnect the USB storage
device while the firmware is being updated.

You can only update the firmware when the vehicle is
stopped and the handbrake is engaged.
1 Download the firmware update files into your
computer.
2 Connect a blank (formatted) storage device
to your computer, and then locate the correct
update file and copy it onto the storage device.
3 Set the external storage device to this product.
 Refer to Plugging and unplugging a USB storage device on
page 5
4 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
5 Touch [)OJ<76($9PB863<LB9].
6 Touch [#7HL4F7(">3:<78()BP<C387(/:>3<7].
7 Touch [)<38<] to start the update.
Follow the on-screen instructions to finish updating the
firmware.
p
If an error message appears on the screen, press any key
displayed and perform the above steps again.
4RHMFÐSGDÐLTKSHETMBSHNMÐ
display
If you properly connected the system, you can display the AV
source status, navigation guidance and vehicle information on
the vehicle’s multi-function display (MFD).
Displaying&the&“System”&set
ting&screen
1 Press the .',+ button.
2 Touch , and then .
Setting&the&navigation&informa
tion&bar
You can set whether to display the guidance information of the
navigation on the AV operation screen.
1 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
2 Touch [!3NLG3<LB9(-7F3<7>()7<<L9GJ].
3 Touch [!3NLG3<LB9(L9PB(CL9>BC] to switch
“'9” or “'PP”.
Setting&navigation &screen&
interruption
You can set whether to automatically switch to the navigation
screen from the AV screen or the application screen when your
vehicle approaches a guidance point such as an intersection.
1 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
2 Touch [!3NLG3<LB9(-7F3<7>()7<<L9GJ].
3 Touch ["#T"::(%;L>7(,B>7] to switch “'9” or
“'PP”.
Setting&Bluetooth&audio&source&
activation
The default setting is “'9”.
1 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
2 Touch ["#()B;847()7<<L9GJ].
3 Touch [2F;7<BB<H(";>LB] to switch “'9” or
“'PP”.
Setting&the&ever&scroll
When “+N78()48BFF” is set to “'9”, the recorded text information
scrolls continuously in the display while the vehicle is stopped.
The default setting is “'PP”.
1 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
2 Touch [+N78()48BFF] to switch “'9” or “'PP”.
Setting&the&beep&tone
The default setting is “'9”.
1 Display the “)OJ<76” setting screen.
 Refer to Displaying the “)OJ<76” setting screen on page
52
2 Touch [277:(&B97] to switch “'9” or “'PP”.
Setting&the&rear&view&camera
A separately sold rear view camera (e.g. ND-BC8) is required
for utilising the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the gearstick is in the REVERSE (R) position.
036783(#L7C mode also allows you to check what is behind you
while driving.
Camera for Camera View mode
036783(#L7C can be displayed at all times. Please note that
with this setting, the camera image is not resized to fit, and that
a portion of what is seen by the camera is not viewable.
To disp la y th e cam er a im ag e, t ou ch [036783(#L7C] on the AV
source selection screen.

Refer to Source on the AV source selection screen on page
7
p
To set the rear view camera as the camera for Camera View
mode, set “2345(036783($9:;<” to “'9”.
CAUTION
Check to make sure settings for rear view camera displays a
mirror reversed image.
p
Immediately verify whether the display changes to a
rear view camera image when the gearstick is moved to
REVERSE (R) from another position.
System5settings
!"#$%&''()*"+
Vehicle5equip%
ment5information
System5settings