User manual

&
Notes&on&internal&memory
Before&removing&the&vehicle&battery
If the battery is disconnected or discharged, the memory will be
erased and must be reprogrammed.

Some of the settings and recorded contents will not be reset.
Data&subject&to&erasure
The information is erased by disconnecting the yellow lead from
the battery (or removing the battery itself).

Some of the settings and recorded contents will not be reset.
Resetting&the&microprocessor
CAUTION
Pressing the -+)+& button resets settings and recorded
contents to the factory settings.
—
Do not perform this operation when a device is connected
to this product.
—
Some of the settings and recorded contents will not be
reset.
The microprocessor must be reset under the following
conditions:

Prior to using this product for the first time after installation.
 If this product fails to operate properly.
 If there appears to be problems with the operation of the
system.

If your vehicle position is shown on the map with a signifi-
cant positioning error.
1 Turn the ignition switch OFF.
2 Press the -+)+& button with a pen tip or other
pointed implement.
 Refer to Checking part names and functions on page 4
Settings and recorded contents are reset to the factory settings.
About&this&manual
This manual uses diagrams of actual screens to describe oper-
ations. However, the screens on some products may not match
those shown in this manual depending on the model used.
Meani ngs&of&Symbols&Used&in&This&
Manual
This indicates to touch an appropriate soft key
on the touch screen.
HOLD
This indicates to touch and hold an appropri-
ate soft key on the touch screen.
This indicates that there is a reference or
supplementary for the key or screen.
Checking&part&names&and&
functions
HOME
MAP
MODE
SOURCE
MUTE
CAR
1 2
34567 89a
1 .',+
button
Press to display the top menu screen.
Press and hold to activate the voice recogni-
tion function.

Refer to Using the voice recognition func-
tion on page 31
2 )'/-0+
button
Press to cycle through all the available
sources.
3 ,"1
button
Press to display the map screen.
Press and hold to switch to the camera view
mode.
p
This function is available only when “ 2345(
036783($9:;<” or “=9>(036783($9:;<” is
set to “'9”.
4 #'? (@/A) knob
Rotate to adjust the AV (Audio and Video) source volume.
Press to switch to the “1BC78('DD” mode.

Refer to Power Off mode on page 7
5 -+)+&
button

Refer to Resetting the microprocessor on
page 4
6 ,'E+
button
Press to switch between the Application
screen and the AV operation screen.
Press to turn the display off.
p
Press and hold to turn the display off when
the Application screen is available.
p
When the display is turned off, touch the
screen to revert to the original screen.
7 LCD screen
8 0"-
button
Press to display the vehicle information
screen.
PrecautionBasic5operation
!"#$%&''()*"+
Precaution Basic5operation