User manual

TL
p
By rotating the rotary encoder, you can also switch the
preset service components.
p
By rotating and holding the rotary encoder and then releas-
ing it, you can also perform seek tuning.
Digital&Radio&tuner&operations
For improved Digital Radio reception, make sure an optional
Digital Radio aerial with phantom power input (active type) is
used.
Current consumption of Digital Radio aerial should be 100 mA
or less.

For details on how to connect a Digital Radio aerial, refer to
the installation manual.
Digital Radio (DAB) features the following:

High sound quality (nearly as high as for CDs, although it
may be reduced in some cases in order to allow more ser-
vices to be broadcast)

Interference-free reception
MFN&support
When some ensembles support the same service compo-
nent, switches to another ensemble that has better reception
automatically.
Starting&procedure
1 Display the AV source selection screen.
HOME
2 Touch [ELGL<3F(-3>LB].
Listening&to&a&recent&broadcast&
(time&shift&mode)
This product stores recent broadcasts to memory automatically.
You can pause or listen to the stored broadcasts again by using
this function (time shift mode).
1 Touch .

Touch to resume the live broadcast.
p Stored broadcast is overwritten by the latest broadcast.
p If the duration that a selection is paused exceeds the length
of the memory capacity, playback will resume from the
beginning of the selection in memory.
Selecting&a&service&component
You can select a ser vice component.
p
When you start to use this source, service list information is
automatically updated.
p
When there is any change in the current ensemble, service
list information is automatically updated.
1 Touch .
2 Touch the category.
 )78NL47:
Displays all service components.

18BG836(&O:7:
Searches from programme type information.

+9J76RF7:
Displays the ensemble list.
3 Touch the item.
 If you touch [/:>3<7()<3<LB9J], you can update
the channel list.
Displaying&the&“DAB&settings”&
screen
1 Display the “)OJ<76” setting screen.
HOME
2 Touch ["#()B;847()7<<L9GJ].
3 Touch [E"2()7<<L9GJ].
Setti ng&the&Digital&Radio&aerial&
power&supply
This function allows you to select whether to output power to a
connected Digital Radio aerial.
The default setting is “'9”.
p
This setting is available when the source is turned off.
1 Display the “E"2()7<<L9GJ” screen.
 Refer to Displaying the “DAB settings” screen on page 37
2 Touch ["9<7993(1BC78] to switch “'9” or
“'PP”.
Setting&the&service&follow
The default setting is “'9”.
p
This setting is available only when “ELGL<3F(-3>LB” is
selected as the source.
p
Depending on the model used, this menu may not be
displayed.
HARD&LINK
When the tuner cannot get good reception, tunes to another
ensemble that supports the same service component.
If no alternative service component can be found or reception
remains poor, this function will automatically switch to an
identical FM broadcast.
SOFT&LINK
When HARD LINK is unsuccessful, tunes to another ensemble
that supports the similar service component.
If no alternative service component can be found or reception
remains poor, this function will automatically switch to a similar
FM broadcast.
p
SOFT LINK function is available when “)BP<(?L95” is “'9”.

Refer to Setting the Soft link on page 37
p
Only available in areas where SOFT LINK function is
supported.
p
The broadcast content of the switched channel may differ
from the content of the original channel.
1 Display the “E"2()7<<L9GJ” screen.
 Refer to Displaying the “DAB settings” screen on page 37
2 Touch [)78NL47(DBFFBC] to switch “'9” or “'PP”.
Setting&the&Soft&link
The default setting is “'PP”.
p
This setting is available only when “)78NL47(DBFFBC” is set to
“'9”.

Refer to Setting the service follow on page 37
p
Depending on the model used, this menu may not be
displayed.
1 Display the “E"2()7<<L9GJ” screen.
 Refer to Displaying the “DAB settings” screen on page 37
2 Touch [)BP<(?L95] to switch “'9” or “'PP”.
1DBDHUHMFÐSQ@EÆBÐ@MMNTMBDLDMSRÐ3 
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
The default setting is “&"('DD”.
!"#$%&''()*"+
Digital5Radio