User manual

,&
Car&Shuttle&Trains
When this function is turned off, the route is calculated prioritiz-
ing the avoidance of car shuttle trains.
Car shuttle trains are used to transport vehicles for relatively
short distances and they usually connect places that are not
easily accessible by road.
Carpool&Lanes
When this function is turned off, the route is calculated prioritiz-
ing the avoidance of carpool and HOV lanes.
p
The navigation system avoids carpool and HOV lanes by
default.
Unpaved&Roads
When this function is turned off, the route is calculated prioritis-
ing the avoidance of unpaved roads.
p
The navigation system avoids unpaved roads by default.
“Sound”&settings
p The following settings marked with an asterisk (*) are
enabled only when a TTS-voice is selected for the voice
language.
Voice
You can adjust the volume of the guidance sounds (verbal
instructions).
Alert&Beeps
You can adjust the volume of the non-verbal alert sounds
(beeps).
Ding
You can turn off the attention tone that precedes the verbal
instructions or adjust its volume.
Voice&Guidance
You can enable or disable voice guidance.
p
This function is enabled by default.
Annou nce&Streets&and&Roads&in&Native&
Language&Area*
You can select whether to have the navigation system announce
the street names in the native language of the area, only the road
numbers, or only the manoeuvres.
Annou nce&Streets&and&Roads&in&
Foreign&Language&Area*
You can select whether to have the navigation system read the
street names in a foreign country, only the road numbers, or only
the manoeuvres.
Early&Indication&of&Manouevres
You can select whether you want an immediate announcement
for the next manoeuvre or to receive the information when the
manoeuvre is near.
Verbosity&Level
You can set the verbosity of the voice instructions: how much
information is given and how often the prompts occur.

,L9L63F: Voice instructions are given once right before the
next manoeuvre.

,7>L;6: Voice instructions are given once as the vehicle
approaches the next manoeuvre and it is repeated right
before the manoeuvre.

#78RBJ7: Voice instructions are given once relatively far from
the next manoeuvre, it is repeated as the vehicle approaches
the next manoeuvre, and it is repeated again right before the
actual manoeuvre.
Announce&Route&Summary*
You can select whether to have the navigation system announce
by voice a quick summary of the route whenever a route is
calculated.
Announce&Country&Info*
When you cross country borders, this navigation system can
read out information about the country you have just entered.
MMNTMBDÐ3Q@EÆBÐ(MEN
You can select whether to have the navigation system announce
by voice the traffic information whenever a traffic incident on
your route is received.
Announce&System&Messages*
When a system message appears, this navigation system can
read out the message.
“Warnings”&settings
Important
 This system is able to warn you if you exceed the current
speed limit. This information may not be available for
your region (ask your local dealer), or may not be fully
correct for all roads on the map.

You are liable for ensuring that using this feature is legal
in the country where you intend to use it.
Speed&Warning
 I389(IH79():77>L9G
You can select whether you want to receive visible and/or
audible warnings.
The following alert types are available:
— ";>LB(39>(#LJ;3F: When selected, audible and visible
warnings will go off when you exceed the speed limit.
— #LJ;3F: When selected, visible warnings will go off when
you exceed the speed limit.
— ELJ3RF7>: When selected, no warnings will go off.

):77>(?L6L<("FC3OJ(#LJLRF7
You can select whether you want to see the speed limit sign
on the map all the time. When you set the speed limit to
always be visible, the colour of the speed limit sign changes
when you exceed the speed limit.

';<JL>7(&BC9JX(YYYZ(BP(<H7():77>(?L6L<
You can receive a warning when you reach the set percent-
age of the speed limit in rural areas.

IL<HL9(&BC9JX(YYYZ(BP(<H7():77>(?L6L<
You can receive a warning when you reach the set percent-
age of the speed limit in urban areas.
Alert&Points
This setting allows you to receive a warning when approaching
alert points like school zones or railroad crossings.

Refer to Setting the alert point warnings on page 26
Warning&Road&Signs
Maps may contain driver alert information. Touch this key to turn
on or off these warnings and to set the distance from the hazard
to receive the warning at. These can be set individually for the
different warning types.
!"#$%&''()*"+
Customising5preferences5of5the5navigation