Operation Manual

61
5 Touch any number between [1] to [8] to select
the desired level.
p The lower the level is set, the tighter the restriction is
applied.
p
The default setting is “8”.
6 Touch .
p We recommend to keep a record of your code number in
case you forget it.
p
The parental lock level is recorded on the disc. You can con-
firm it by looking at the disc package, the included literature
or the disc itself. You cannot use parental lock with discs that
do not feature a recorded parental lock level.
p
With some discs, parental lock operates to skip certain
scenes only, after which normal playback resumes. For
details, refer to the disc’s instructions.
Displaying your DivX VOD registra-
tion code
If you want to play DivX
®
VOD (video on demand) content on this
product, you must first register this product with your DivX VOD
content provider. You do this by generating a DivX VOD registra-
tion code, which you submit to your provider.
p
Keep a record of the code as you will need it when you
register this product to the DivX VOD provider.
1 Display the “DVD/DivX Setup” screen
 Refer to Displaying the “DVD/DivX Setup” screen on page
60
2 Touch [DivX® VOD].
p If a registration code has already been activated, it cannot be
displayed.
3 Touch [Registration Code].
Your 10-digit registration code is displayed.
p
Make a note of the code as you will need it when you deregis-
ter from a DivX VOD provider.
Displaying your DivX VOD deregistra-
tion code
A registration code registered with a deregistration code can
be deleted.
1 Display the “DVD/DivX Setup” screen
 Refer to Displaying the “DVD/DivX Setup” screen on page
60
2 Touch [DivX® VOD].
3 Touch [Deregistration Code].
Your 8-digit deregistration code is displayed.
p
Make a note of the code as you will need it when you deregis-
ter from a DivX VOD provider.
Automatic playback of DVDs
When a DVD disc with a DVD menu is inserted, this product will
cancel the menu automatically and start playback from the first
chapter of the first title.
The default setting is “Off”.
p
Some DVDs may not operate properly. If this function is not
fully operable, turn this function off and start playback.
1 Display the “DVD/DivX Setup” screen
 Refer to Displaying the “DVD/DivX Setup” screen on page
60
2 Touch [DVD Auto Play] to switch “On” or “Off”.
Setting the video signal for the
rear view camera
When you connect a rear view camera to this product, select the
suitable video signal setting.
The default setting is “Auto”.
p
You can operate this function only for the video signal input
into the AV input.
1 Display the “Video Setup” screen.
HOME
2 Touch [Video Signal Setting].
3 Touch [Camera].
4 Touch the item.
The following items are available:
Auto, PAL, NTSC, PAL-M, PAL-N, SECAM.
Setting the video output
format
You can switch the video output format of the rear display
between PAL and NTSC.
The default setting is “PAL”.
p
The video output format setting has no effect on “AUX”,
“AV”, and “iPod” sources (when the control mode is set to
iPod).
p
This function is available when “Source OFF” is selected on
the AV source, and a source for the rear display other than
“Disc”, “USB1”, “USB2” is selected.
1 Display the “DVD/DivX Setup” screen.
 Refer to Displaying the “DVD/DivX Setup” screen on page
60
2 Touch [Video Output Format] to switch “PAL”
or “NTSC”.
< CRB4880-A >
Video settings