Hardware manual

31
Chapter 2
Using Built-in DVD Player (AVIC-9DVD
——
——
only)
(20) SOURCE button
For the built-in DVD, the source is turned OFF.
(21) Cross Key 22
22
, 33
33
, 55
55
, ∞∞
∞∞
button
This button is used when playing CD.
(22) A.MENU (AUDIO) button
Display audio menus. You can display the CD Function menu only when the Operation mode
switch is set to “DVD” and you are using the Navigation unit’s built-in DVD player.
(23) BACK/FUNC button
*1 Return you to the previous indications in the CD Function menu only when the Operation mode
switch is set to “DVD” and you are using the Navigation unit’s built-in DVD player.
(24) DISP button
Display an Information Display. Press once more to change the Information Display.
(25) BAND/ESC button
It also cancels the menu you are viewing, and returns you to the original display. Only when
the operation mode switch is set to “DVD”, and the built-in DVD player is used, if you press
this button in the CD Function menu, normal audio screen appears.
■Basic method of watching DVD
1 Insert the DVD with its title side facing upwards.
The disc starts playing.
➲ If DVD disc is already inserted, push the control stick up.
➲ If the playback of the disc does not start, press the SOURCE button to switch the
source to NAVI.
2 Press the disc eject button and remove the DVD.
Play is cancelled and DVD is ejected from the disc loading slot.
If playing again, push the control stick up.
Setting A : Returns you to the previous display.
Setting B and D : Display function menus.
*1
Setting C : Not used. *1
About Prohibition Symbol
In some cases, a Prohibition Symbol “ ” may appear while playing DVD or when play
is stopped, and you may not be able to operate the DVD. This is due to some specifica-
tions of the DVD-Disc. Operations that are possible or impossible may vary according to
various conditions such as the contents of the DVD and particular sections to play. (For
detailed method of operation, see the instruction manual attached to the DVD-Disc.)