Operation Manual

58
Appendix
5 Check the details of the cautionary mes-
sage and touch “OK”.
6 To set the time difference, touch “+” or
“–”.
The time difference between the time origi-
nally set in this unit (Central European Time)
and the current location of your vehicle is
shown. If necessary, adjust the time differ-
ence. Touching “+” or “–” changes the time
difference display in one-hour increments.
The time difference can be set from +3 to –3
hours.
7 If necessary, set to summer time.
Summer time is off by default. Touch
“Summer Time” to change the time if you
are in the daylight saving period. This turns
the display below Summer Time “On”.
8 To complete the setting, touch “Back”.
The map of your surroundings appears.
This completes the setup of your Navigation Sys-
tem. Chapter 1 explains the basic operation of
your Navigation System.
➲ To change the language and time later ➞
Chapter 4.
Time difference
CRB1881A_ENGLISH.book Page 58 Thursday, April 24, 2003 11:54 AM