Operation Manual

45
Chapter 3 Utilising Various Information
❒ If a map disc is not set to the Navigation Sys-
tem, the background picture function is not
available.
❒ When the Navigation System is reset, or the
language setting is changed, the background
picture may change back to the original pic-
ture. (There is also a possibility that the sys-
tem will revert to the original picture for some
other reason). If this happens, set the back-
ground picture again.
Checking the Navigation Status
The navigation status, including the driving sta-
tus of a vehicle, positioning status by satellite,
learning status of the 3D sensor, and cable con-
nection status can be checked.
Checking sensor learning status
and driving status
1 Touch “Information” in the Main menu,
then touch “3D Calibration Status”.
The 3D Calibration Status screen appears.
1. Distance
Driving distance is indicated.
2. Speed Pulse
Total number of speed pulses is indicated.
3. Learning Status
Current driving mode is indicated.
4. Degree of learning
Learning situations of Distance, Right Turn,
Left Turn, and 3D detection are indicated by
the length of bars.
5. Speed
Speed detected by this unit is indicated.
(This indication may be different from the
actual speed of your vehicle, so please do
not use this instead of the speedometer of
your vehicle.)
6. Front and back G/Rotational speed
Accelerated velocity of your vehicle to front
/ back direction is indicated. Also, rota-
tional speed when your vehicle turns to left
or right is shown.
7. Inclination
Degree of slope of the street is indicated.
675
1
2
3
4
CRB1881A_ENGLISH.book Page 45 Thursday, April 24, 2003 11:54 AM