Operation Manual

30
Chapter 2
Setting a Route to Your Destination
Checking the set route from the
Information menu
You can also check the information about the set
route from the Information menu.
1 After touching “Information” in the main
menu, touch “Route Profile” or “Route
Scroll”.
2 Check the contents on the display.
➲ “Route Scroll” ➞ Page 29 (Step 3 and 4)
➲ “Route Profile” ➞ Page 29 (Step 3 and 4)
3 Touch “Back”.
You can return to the previous display.
Recalculating the Route to Your
Destination
You can recalculate the route to avoid a traffic
jam or road works ahead. You can set the length
of the area, and avoid just that area, or you can
even search a new route from the current loca-
tion to your destination. (On the map screen dur-
ing route guidance, try the following operations.)
1 Touch the map screen.
The Shortcut menu appears.
2 Touch “Chg.Route”.
The Route/Detour menu appears.
3 Touch “Reroute” or the distance from the
list.
After the route is calculated, the map screen
shows your surroundings and route guidance
is resumed.
On this display, you can select the following
items:
Reroute :
The route from the current position to your
destination is recalculated.
The distance of the detour (1-50 km/mi) :
Searches detours of a specified distance in
the route ahead of your current position.
➲ For details of switching the display between
“km” and “mi”(miles). “KM/Mile Setting” ➞
Page 49.
➲ “Auto Avoid Traffic” ➞ Page 27
CRB1881A_ENGLISH.book Page 30 Thursday, April 24, 2003 11:54 AM