Operation Manual

28
Chapter 2
Setting a Route to Your Destination
Areas to Avoid
➲
About Areas to Avoid ➞ Page 37
Avoid Ferry
This setting controls whether or not ferry cross-
ings should be taken into account.
On :
Calculate a route that avoids ferries.
Off* :
Calculate a route that may include ferries.
Perform the route calculation of
the several route options, and
select one
You can get route calculations of several route
options. After route options are calculated, select
the one you want.
1 Set the “Route No.” to “Multiple Routes”.
➲ Changing the search conditions ➞
Page 27
2 Search your destination and set the route.
Calculated routes are shown in different col-
ours (from two to six routes).
3 Touch “Next” to change the displayed
route.
The following information is displayed on this
screen:
(1)Route calculation condition
Displaying the conditions set by the Route
Options menu by icon.
• Use/avoid motorway
• Use/avoid toll road
• Use/avoid ferry
Displaying impracticability of fulfilling the
conditions by icon.
• Pass through Area to Avoid against the
setting “Areas to Avoid” is “On”.
• Use toll road against the setting “Avoid
Toll Road” is “On”.
(2)Distance to your destination
(3)Travel time to your destination
❒ The “Avoid Motorway” setting may not
be reflected, depending on the distance to
the destination.
4 Touch “Information” to check the infor-
mation of the selected route.
You can also check details of the roads along
the selected route. (If you touch “Back”, you
can return to the previous display.)
➲ “Route Scroll” ➞ Page 29 (Step 3 and 4)
➲ “Route Profile” ➞ Page 29 (Step 3 and 4)
❒ After the route is calculated, it may take
some time until the detailed route informa-
tion (Route Profile) can be confirmed.
5 Touch “OK”.
The route you selected is accepted, and the
map of your surroundings appears. When you
start driving, the route guidance begins.
➲ For information on Route Guidance ➞
Page 16
❒ If the above operations are not performed
within 30 seconds after the route calcula-
tion is completed and you have already
started your vehicle, the route selected at
the time is automatically chosen.
(3) (2)(1)
CRB1881A_ENGLISH.book Page 28 Thursday, April 24, 2003 11:54 AM