Installation Guide

1. Reconnecting the battery.

First, double-check that all connections are correct and that the unit is installed correctly.

Reassemble all vehicle components that you previously removed. Then reconnect the neg-

ative (–) cable to the negative (–) terminal of the battery.

2. Start the engine.

3. Press the reset button on the main unit.

Press the reset button on the main unit using a pointed object such as the point of a pen.

4. Set the navigation system.

Set the navigation system as explained in the “Operation Manual” or “Hardware Manual”.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

ENG/MASTER 96

After installing the unit

Reset button

CRD3803A_inst_001_029_UK 4/1/03 2:22 PM Page 29