Owner's Manual

3 Acceleration or deceleration/Rotational
speed
Indicates the acceleration or deceleration
velocity of your vehicle. The rotational
speed when your vehicle turns to the left or
right is also shown.
4 Inclination
Indicates the incline of the street that you
are currently on.
5 Speed Pulse
Indicates the total number of speed pulses.
6 Degree of learning
Sensor learning situations for distance
(Distance), right turns (Right Turn), left
turns (Left Turn) and 3D detection (3D) are
indicated by the length of the bars.
p When the tires have been changed or
chains have been fitted, turning on the
Speed Pulse allows the system to detect
the fact that the tire diameter has chan-
ged, and automatically replaces the
value for calculating distance.
p If a separately sold speed pulse genera-
tor (ND-PG1) is connected, the distance
calculation value cannot be replaced
automatically.
Clearing the status
You can delete the learned results stored in
“Distance”, “Speed Pulse” or “Learning”.
1 Touch [Distance] or [Speed Pulse].
A message confirming whether to erase the
data appears.
2 Touch [Yes].
The results stored in “Distance” or “Speed
Pulse” are cleared.
3 Touch [Learning].
The pop-up menu appears.
4 Touch [Reset All].
All learned results are cleared.
p Touch [Reset All] for the following cases:
! After changing the installation position
of the navigation system
! After changing the installation angle of
the navigation system
! After moving the navigation system to
another vehicle
# If you touch [Reset Distance], all learned re-
sults stored in “Distance” are cleared.
Checking the connections
of leads
Check that the leads are properly connected
between this product and vehicle. Also check
whether they are connected in the correct po-
sitions.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “System” screen appears.
3 Touch [System Information].
The following screen appears.
4 Touch [Connection Status].
The “Connection Status” screen appears.
2
3
5
4
1
En
192
Chapter
32
System settings