Installation Guide

En
9
<CRD5002-A> UC
Connecting an iPhone
with Lightning connector
NOTES
• For details on how to connect an external
device using a separately sold cable, refer to
the manual for the cable.
• For details concerning the connection,
operations and compatibility of iPhone, refer
to Operation Manual.
Connecting via the USB port
(iPhone)
The USB interface cable for iPod / iPhone
(CD-IU52) (sold separately) is required for
the connection.
When using Apple CarPlay, connect the
iPhone to USB port 1.
iPhone with
Lightning connector
USB port 1
This product
USB port 2
USB cable
1.5 m (4 ft. 11 in.)
USB interface cable for iPod / iPhone
(CD-IU52) (sold separately)
Connecting via the RGB input
(iPhone)
The following cables are required for the
connection.
• VGA/USB interface cable for iPod / iPhone
(CD-IV202AV) (sold separately)
• USB interface cable for iPod / iPhone (CD-IU52)
(sold separately)
• Lightning to VGA Adapter (Apple Inc. products)
(sold separately)
This product
USB port 1
RGB input
iPhone with
Lightning connector
Lightning to VGA Adapter
(Apple Inc. products)
(sold separately)
VGA/USB interface cable
for iPod / iPhone
(CD-IV202AV) (sold separately)
USB interface cable for iPod / iPhone
(CD-IU52) (sold separately)
Connecting an iPhone
with 30-pin connector
NOTES
• For details on how to connect an external
device using a separately sold cable, refer to
the manual for the cable.
• For details concerning the connection,
operations and compatibility of iPhone, refer
to Operation Manual.
Connecting via the AUX input
(iPhone)
The USB interface cable for iPod / iPhone
(CD-IU201V) (sold separately) is required
for the connection.
This product
USB port 1
USB port 2
AUX input
Mini-jack extension cable
2 m (6 ft. 7 in.)
USB cable
1.5 m
(4 ft. 11 in.)
iPhone with
30-pin connector
USB interface cable for iPod / iPhone
(CD-IU201V) (sold separately)
NOTE
Connect the USB cable to USB port 1 when
using “Pandora” as the source.
Connecting via the RGB input
(iPhone)
The USB interface cable for iPod / iPhone
(CD-IU201S) (sold separately) is required
for the connection.
This product
USB port 1
RGB input
USB cable
1.5 m (4 ft. 11 in.)
iPhone with
30-pin connector
USB interface cable for iPod / iPhone
(CD-IU201S) (sold separately)