Owner's Manual

56
Subscribing to the SiriusXM
Satellite Radio service
1 Select SiriusXM as the source.
 Refer to Starting procedure on page 55
You should be able to tune in to Channel 1. If you cannot get
Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is
installed correctly.
2 Switch to Channel 0 and check the Radio ID.
You will need this number to activate your subscription.
p
Note that the SiriusXM Radio ID does not include the letters
I, O, S or F.
3 Activate the service either online or by phone.
p In the USA, you can activate online or by calling SiriusXM
Listener care:

Visit the website
www.siriusxm.com/activatenow

Call SiriusXM Listener Care at
1-866-635-2349
For Canadian Subscriptions, please contact:

Visit the website
www.siriusxm.ca/activatexm

Call XM customer Care at
1-877-438-9677
p
The SiriusXM satellites will send an activation message
to your tuner. When the tuner has received the message,
“Subscription Updated” is displayed.
p
The activation process usually takes 10 to 15 minutes but
may take longer. Do not turn off this product while the activa-
tion message is displayed.
Selecting a channel from the
category list
p The types of categories available depend on the types of
channels available.
p
It may take time to display the channel list depending on the
SiriusXM reception condition.
1 Touch .
2 Touch the category name.
3 Touch the desired channel.
 If you touch , you can switch between list
types.
The displayed list switches in the following order.
Channel Name—Artist Name—Song Title—
Content Info

If you touch , you can scan each channel in
the selected category.
Using TuneScan
™
When you activate the TuneScan
™
feature, you will hear a few
seconds of the songs, which have not been listened to, from
each of the music channels stored as presets on the current
band.
p
When fewer than two music channels are stored as presets,
you cannot perform scan tuning.
p
TuneScan
™
may take a few minutes to become available
after the product is turned on or the preset band is changed.
1 Touch .
1 32
1 Continues playing the current scanning song or channel.
2 Skips to the previous/next song during TuneScan
™
or to the
previous/next channel during category scan.
3
Cancels scan play.
Using TuneMix
™
TuneMix
™
plays a unique blend of songs from music channels
stored in the current SiriusXM Preset Band.
p
SXV300 or later SiriusXM Connect vehicle tuner (sold sepa-
rately) is required to use this function.
p
When fewer than two music channels are stored as presets,
you cannot perform TuneMix
™
.
p
The locked channel cannot be used for the TuneMix
™
until
you clear the password.
1 Touch
Tune
M ix
.

To cancel TuneMix
™
, touch the key again.
Displaying the “SiriusXM
Settings” screen
1 Display the “System” setting screen.
2 Touch [AV Source Settings].
3 Touch [SiriusXM Settings].
Setting TuneStart
™
Automatically start songs from the beginning when you tune
to one of your preset channels in the current preset band when
TuneStart
™
is turned on.
The default setting is “On”.
1 Display the “SiriusXM Settings” screen.
 Refer to Displaying the “SiriusXM Settings” screen on page
56
2 Touch [Tune Start] to switch “On” or “Off”.
Setting parental lock
The Parental Control feature allows you to limit access to any
SiriusXM channels, including those with mature content.
When enabled, the Parental Control feature requires you to enter
a passcode to tune to the locked channels.
The default passcode is “0000”.
Setting the passcode
1 Display the “SiriusXM Settings” screen.
 Refer to Displaying the “SiriusXM Settings” screen on page
56
2 Touch [Parental Control].
3 Enter the passcode.
4 Touch .
5 Touch [Edit Code].
6 Enter the passcode you want to set.
7 Touch .
< CRB4817-A >
SiriusXM
®
Satellite Radio