Owner's Manual

Viewing the traffic list
Traffic information is displayed onscreen in a
list. This allows you to check how many traffic
incidents have occurred, the locations, and
the distance from your current position.
1 Prepare the AVICSYNC function for use.
= For details, refer to Regular startup on page
13.
2 Press the MAP button.
The Map screen appears.
3 Touch the following key.
Displays the navigation menu on
the Map screen.
4 Touch [Traffic].
The “Traffic Summary” screen appears.
5 Touch [Traffic Events].
The “Traffic Events” screen appears.
A list with traffic information that has been re-
ceived is shown. The list is sorted by distance
from your current position. Places (street
names) where incidents have occurred are dis-
played on the list.
p If a route is set, relevant events for your cur-
rent route are shown in the upper section of
the list.
p Touching the desired item allows you to
check its position on the map. Touch
or
to show the previous or next event.
Checking the traffic incidents
on the map
Traffic event information can be displayed on
the map.
1 Prepare the AVICSYNC function for use.
= For details, refer to Regular startup on page
13.
2 Press the MAP button.
The Map screen appears.
3 Touch the following key.
Displays the navigation menu on
the Map screen.
4 Touch [Traffic].
The “Traffic Summary” screen appears.
5 Touch [Traffic Map].
The “Current Traffic Map” screen appears.
Road segments affected by traffic incidents
are displayed in an alternate color on the map,
and small symbols above the road show the
nature of the incident.
The traffic congestion lines indicate the de-
gree of the congestion by color.
When traffic incidents occur on
your route
The notification icon shows the status of traffic
information reception.
En
18
Chapter
04
Using online services