Operation Manual

39

Refer to Setting the second camera on page 38
1 Display the “System” setting screen.
 Refer to Displaying the “System” setting screen on page
37
2 Touch [Camera settings].
3 Touch [Camera View] to switch “On” or “Off”.
p You can also turn this function on by touching [Camera
View] on the AV source selection screen or in the source
list.
Setting the safe mode
You can set the safe mode that regulate operating some func-
tions only when you stop your vehicle in a safe place and apply
the handbrake.
The default setting is “On”.
1 Display the “System” setting screen.
 Refer to Displaying the “System” setting screen on page
37
2 Touch [Safe Mode] to switch “On” or “Off”.
Setting the demo mode
The default setting is “On”.
1 Display the “System” setting screen.
 Refer to Displaying the “System” setting screen on page
37
2 Touch [Demo Mode] to switch “On” or “Off”.
Selecting the system language
p If the embedded language and the selected language setting
are not the same, text information may not display properly.
p
Some characters may not be displayed properly.
1 Display the “System” setting screen.
 Refer to Displaying the “System” setting screen on page
37
2 Touch [System Language].
3 Touch the language.
Reversing the climate control
status display
When the optional vehicle bus adapter is connected, the left/
right display of the climate control status screen can be reversed
if the display does not match that of the vehicle.
The default setting is “Off”.
1 Display the “System” setting screen.
 Refer to Displaying the “System” setting screen on page
37
2 Touch [Climate Reverse] to switch “On” or
“Off”.
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadio Mode by setting the
language of the keyboard for iPhone.
p
This function is only available in AppRadio Mode on the
iPhone.
1 Display the “System” setting screen.
 Refer to Displaying the “System” setting screen on page
37
2 Touch [Keyboard].
3 Touch the language.
Adjusting the response posi-
tions of the touch panel (touch
panel calibration)
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p
Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p
Do not turn off the engine while saving the adjusted position
data.
1 Display the “System” setting screen.
 Refer to Displaying the “System” setting screen on page
37
2 Touch [Touch Panel Calibration].
3 Touch two corners of the screen along the
arrows, and then touch the centres of two +
marks at the same time twice.
4 Press the button.
The adjustment results are saved.
5 Press the button once again.
Proceed to 16-point adjustment.
6 Gently touch the centre of the “+” mark dis-
played on the screen.
The target indicates the order.
 When you press the button, the previous
adjustment position returns.

When you press and hold the button, the
adjustment is cancelled.
7 Press and hold the button.
The adjustment results are saved.
Setting the dimmer
Setting the dimmer trigger
The default setting is “Auto”.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the “System” setting screen.
 Refer to Displaying the “System” setting screen on page
37
2 Touch [Dimmer Settings].
3 Touch [Dimmer Trigger].
4 Touch the item.
 Auto:
Switches the dimmer to on or off automatically according to
your vehicle’s headlight turning on or off.

Manual:
Switches the dimmer to on or off manually.

Time:
Switches the dimmer to on or off at the time you adjusted.
Setting the dimmer duration in day
or night
The default setting is “Day”.
< CRB4770-A >
System settings