Operation Manual

36
2 Touch [AV Source Settings].
3 Touch [MIXTRAX Settings].
Setting the ash pattern
The flashing colour changes with the changes in the sound and
bass levels.
The default setting is “Sound1”.
1 Display the “MIXTRAX Settings” screen.
 Refer to Displaying the “MIXTRAX Settings” screen on page
35
2 Touch [Flash Pattern].
3 Touch the item.
 Sound1 to Sound6:
The flash pattern changes according to the sound level.

L-Pass1 to L-Pass6:
The flash pattern changes according to the bass level.

Random1:
The flash pattern changes randomly according to the sound
level mode and low pass mode.

Random2:
The flash pattern changes randomly according to the sound
level mode.

Random3:
The flash pattern changes randomly according to the low
pass mode.

Off:
The flash pattern does not flash.
Switches the display to the rear
view camera image.
The display switches only when the rear view
camera setting is set to “On” and the gearstick
is in the REVERSE (R) position.
The position of detected obstacles
Parking Assist screen
The fan direction
The heating setting for the seat
The internal temperature
setting for the seat
The fan speed
A/C Control screen
The status of the A/C function
Using the Vehicle Bus adapter
By connecting the optional Vehicle Bus adapter, you can display
the operation status of the vehicle’s parking sensor function and
climate control panel on the screen.
Important
 For information on installing the Vehicle Bus adapter, see
the operating manual of the Vehicle Bus adapter.

After installing the Vehicle Bus adapter, be sure to check
operations.

For details about vehicle models that are compatible with
Vehicle Bus adapters, refer to the information on our
website.

Functions and displays vary depending on the vehicle
model. For details of the functions available according to
Vehicle equipment information
< CRB4770-A >
MIXTRAX Vehicle equipment information