Operation Manual

MirrorLink
Message Cause Action
The application list could not
be read out.
Failed to load the application list.
! Disconnect the cable from the smartphone,
and then connect the smartphone again after
a few seconds.
! Turn the ignition switch to OFF and then to
ON.
If the error message is still displayed after per-
forming the above action, reset the smart-
phone.
If the error message is still displayed after per-
forming the above action, please contact your
dealer or an authorised Pioneer Service Sta-
tion.
There is no supported applica-
tion on your MirrorLink de-
vice.
No supported applications can be
found.
Install MirrorLink compliant applications to
your MirrorLink device.
Communication error oc-
curred.
There was a communication error. ! Disconnect the cable from the smartphone,
and then connect the smartphone again after
a few seconds.
! Turn the ignition switch to OFF and then to
ON.
If the error message is still displayed after per-
forming the above action, reset the smart-
phone.
If the error message is still displayed after per-
forming the above action, please contact your
dealer or an authorised Pioneer Service Sta-
tion.
Launching the application
failed.
Failed to launch the application. Tr y again.
Failed to display the screen of
your device because of irregu-
lar resolution.
The image size is too large. The size of the image s transferred from the
device exceeds 800 × 480.
If your MirrorLink device is
locked, please unlock it when
it is safe and lawful for you to
do so.
The MirrorLink device is locked. Unlock the MirrorLink device.
Handling and care of discs
Some basic precautions are necessary when
handling your discs.
Built-in drive and care
! Use only conventional, fully circular discs.
Do not use shaped discs.
! Do not use cracked, chipped, warped, or
otherwise damaged discs as they may da-
mage the built-in drive.
! Use 12-cm discs. Do not use 8-cm discs or
an adapter for 8-cm discs.
Engb
147
Appendix
Appendix
Appendix