Instruction Manual

Equaliser curve
Natural is a curve in which low- and high-pitched
sounds are slightly boosted.
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat is a flat curve in which nothing is boosted.
Custom1 is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is applied to all
AV sources.
Custom2 is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is applied to all
AV sources.
p The default setting is “Powerful ”.
p When “Flat” is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between
“Flat” and a set equaliser curve.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “Audio” screen appears.
3 Touch [Graphic EQ].
The “Graphic EQ” screen appears.
4 Touch the equaliser you want.
Customising the equaliser curves
You can adjust the currently selected equaliser
curve setting as desired. Adjustmen ts can be
made with a 13-band graphic equaliser.
p If you make adjustments when a curve “S.
Bass”, “Powerful”, “Natural”, “Vocal”,or
“Flat” is selected, the equaliser curve set-
tings will be changed to “Custom1” man-
datorily.
p If you make adjustments when the “Cus-
tom2” curve is selected for example, the
“Custom2” curve will be updated.
p “Custom1” and “Custom2” curves can be
created common to all sources.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “Audio” screen appears.
3 Touch [Graphic EQ].
The “Graphic EQ” screen appears.
4 Touch one of the keys to select a curve
that you want to use as the basis of custo-
mising.
5 Touch the frequency for which you
want to adjust the level.
p If you trail a finger across the bars of multi-
ple equaliser bands, the equaliser curve set-
tings will be set to the value of the touched
point on each bar.
Using the auto-adjusted equaliser
You can set the auto-adjusted equaliser to suit
the vehicle’s acoustics. To use this function,
the vehicle’s acoustics must be measured in
advance.
= For details of the operations, refer to Adjust-
ing the equaliser curve automatically (Auto
EQ) on page 108.
p To manually adjust the equaliser curve, set
“Auto EQ&TA” to “Off”.
1 Press the HOME button to display the
Top menu screen.
Engb
107
Chapter
20
Audio adjustments
Audio adjustments