English Français Español AVH-X7700BT AVH-X6700DVD DVD RDS AV RECEIVER AUTORADIO AV RDS LECTEUR DE DVD RADIO AV RDS CON DVD Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Important (Numéro de série) Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie.
Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Important The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Precaution ..........................4 Information to User ..........................................
Contents Switching the time alignment preset...............38 Using the equalizer ........................................39 Adjusting the equalizer curve automatically (Auto EQ) ..................................................39 Saving the sound settings ..............................40 Loading the sound settings ............................40 ■ Theme menu ....................40 Selecting the background display ...................40 Setting the illumination color ..........................
Precaution Information to User ● MODEL NO. : AVH-X7700BT Contains FCC ID : AJDK071 Contains/Contient IC : 775E-K071 ● This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. ● The Bluetooth antenna cannot be removed (or replaced) by user.
Precaution BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: ● Do not turn up the volume so high that you can’t hear what’s around you. ● Use caution or temporarily discontinue use in potentially hazardous situations. ● Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
Precaution ● In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed. If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake.
Precaution 2 Press the RESET button with a pen tip or other pointed implement. Take care not pinch it too tightly or to drop it, and also avoid contact with water or other fluids to prevent permanent damage. Checking part names and functions on page 8 Settings and recorded contents are reset to the factory settings. About this manual This manual uses diagrams of actual screens to describe operations.
Basic operation Checking part names and functions 5 TRK ( / ) button 6 button 1 7 OPEN/ CLOSE button Performs manual seek tuning, fast forward, reverse and track search controls. 8 Press to display the top menu screen. Press and hold to activate the voice recognition function. Using the voice recognition function (for iPhone) on page 16 Press OPEN/CLOSE to open the LCD panel. To close the LCD panel, press OPEN/CLOSE again.
Basic operation Opening and closing the LCD panel Turning the LCD panel horizontally The LCD panel will open or close automatically when the ignition switch is turned on or off. You can turn off the automatic close/ open function. ● Do not close the LCD panel by force with your hands. That will cause a malfunction. ● The automatic close/open function will operate the display as follows. — When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds.
Basic operation Returning the panel to the upright position. As the set angle is saved, the LCD panel will automatically be adjusted to the same position the next time the LCD panel is opened. Inserting/ejecting/connecting media CAUTION Do not insert anything other than a disc into the disc-loading slot. 1 USB cable 2 USB storage device Check that no data is being accessed before pulling out the USB storage device. On first-time startup 1 Start the engine to boot up the system.
Basic operation How to use the screens *4 Application menu screen Time and date setting screen 10 Abcdefg Abcdefg Abcdefg Abcdefg 6 2014 Month/Date 6/10 22 Setting menu screen Application operation screen Source Select Top menu screen *1 12hour 24hour *2 6/10 *4 System d/m/y m/d/y y/m/d Time Format 21 48 Depending on the connection method, the "smartphone setup" screen is displayed.
Basic operation *1 *2 *3 *4 *5 The top menu screen of this manual is the screen when using the AppRadioOne. The items displayed on the screen may vary depending on the connecting device or mode. When you connect an iPhone via Bluetooth wireless technology or a smartphone via USB cable, “Smartphone Setup” screen appears by touching [APPS]. By pressing the button on any screen you can display the Top menu screen.
Basic operation If you touch the key, the rest are scrolled for display. 3 Appears when items cannot be displayed on a single page. Drag the scrubber bar or the list to view any hidden items. Registration and connection of Bluetooth device X7700BT Operating the time bar Displaying the “Bluetooth” screen 1 9999’99” -9999’99” 1 Press 2 Touch 1 You can change the playback point by dragging the key. p Playback time corresponding to the position of the key is displayed while dragging the key.
Registration and connection of Bluetooth device Hands-free phoning X7700BT Switching visibility Displaying the “Bluetooth” screen on page 13 1 Display the “Bluetooth” screen. Bluetooth telephone connected indicator This function sets whether or not to make this product visible to the other device. 2 Touch [Bluetooth Memory Clear]. The device number of the connected device is displayed. 1 Display the “Bluetooth” screen. The confirmation screen appears.
Hands-free phoning 5 Touch CAUTION For your safety, avoid talking on the phone as much as possible while driving. To use this function you need to connect your cellular phone to this product via Bluetooth in advance. Registration and connection of Bluetooth device on page 13 Displaying the Phone menu screen 1 Press 2 Touch . . to end the call. Dialing from the history 1 Display the “Phone menu” screen. Displaying the Phone menu screen on page 15 2 Touch .
Hands-free phoning Setting the private mode During a conversation, you can switch to private mode (talk directly on your cellular phone). Touch off. or to turn private mode on or Making and receiving calls Adjusting the other party’s listening volume This product can be adjusted to the other party’s listening volume. to switch between the three vol Touch ume levels. p Settings can be stored for each device.
Setup for iPod / iPhone or smartphone When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device. The basic flow of iPod / iPhone or smartphone setup 1 Select the method for connecting your device. Setting the device connection method on page 17 2 Connect your device to this product.
Setup for iPod / iPhone or smartphone Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows. iPod / iPhone with a 30-pin connector Device connection method Smartphone Setup Device Connection Bluetooth connection Available sources iPod (audio) iPod (video) Pandora AppRadioOne When connecting via Bluetooth (AVH-X7700BT) iPhone / iPod Wireless via BT Bluetooth connection is required.
Radio Displays the preset channel list. Starting procedure Select an item on the list ("1" to "6") to switch to the preset channel. 1 Display the “AV source selection” screen. Selects the FM1, FM2, FM3 or AM band. 1 2 3 4 5 6 6/10 Radio FM1 21 48 AM Abcdefghi Abcdefghi Abcdefghi 000.00 MHz Performs manual tuning. HOLD Performs seek tuning or non stop seek tuning. Releasing the key in a few seconds, skips to the nearest station from the current frequency.
Disc Track number indicator Hides the touch panel keys. To display again the keys, touch anywhere on the screen. Audio source screen 1 6/10 CD 21 48 Performs frame-by-frame playback. *1 ẂTrack 99 HOLD Ẃ99 9999’99” Pause -9999’99” *2 Stop Each time you touch it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2 99 6/10 Plays files in random order. This function is available for music CD.
Disc Video source screen 2 6/10 DVD or , you can also skip files/chapters p By pressing forward or backward. or , you can also perform p By pressing and holding fast reverse or fast forward. appears. p If a Video-CD with PBC On is being played, p Changing the wide screen mode. Common operations on page 44 You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product. 21 48 Stop 99 L+R 99 ᵫᶓᶊᶒᶇᴾᶁᶆ ᵫᵮᵣᵥᵋᵟ 9999’99” Pause ᵐᵍᵐ -9999’99” Resumes playback (Bookmark).
Compressed audio files Disc p The way to display the menu differs depending on the disc. If you touch directly. Playback screen 1 (Example: USB) , you can operate the DVD menu 6/10 USB ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi Abcdefghi ABC Plays files in random order. *1 : Does not play files in random order. *2 : Plays all files within the repeat range in random order.
Compressed audio files *3 *4 Displays the link search screen. This function is available for the USB storage device only. Selecting a song in the album (link search) on page 23 Switches the media file type. Switching the media file type on page 23 or , you can also skip files forward or p By pressing backward. or , you can perform fast p By pressing and holding reverse or fast forward. You can play compressed audio files stored in a disc or a USB storage device.
Compressed video files Hides the touch panel keys. To display again the keys, touch anywhere on the screen. (Example: Disc) 6/10 ROM (Example: Disc) ROM 21 48 *1 Abcdefghi 9999 99999 01 9999’99” Pause OFF ᵏᵍᵐ 9999 99999 01 9999’99” Full Selecting files from the file name list Full Stop Abcdefghi Compressed audio files on page 22 21 48 Stop Abcdefghi Abcdefghi Starting procedure 6/10 Pause OFF ᵏᵍᵐ -9999’99” *2 *3 -9999’99” Performs fast reverse or fast forward.
Still image files Hides the touch panel keys. 6/10 USB To display again the keys, touch anywhere on the screen. 21 48 Plugging and unplugging a USB storage device on page 10 p Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. 3 Touch [USB]. The image is displayed on the screen. Rotates the displayed picture 90° clockwise. Abcdefghi Selects the previous or next folder.
Still image files 3 Touch “Yes” to overwrite the image. p Each one image can be saved for AV screen or Home screen. If you save the other image, the current wallscreen is overwritten. Setting the slideshow interval JPEG files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set. p This setting is available during playback of the JPEG files. 1 Display the “Video Setup” screen. iPod Audio source screen 1 iPod Plays files in random order.
iPod iPod audio and/or video sources are enabled if either of the cables is connected. iPhone with 30-pin connector on page 49 Registering your Bluetooth devices on page 13 Video source screen 6/10 iPod 21 48 For iPod / iPhone with a Lightning connector users Abcdefghi *3 *4 99999/99999 Full 9999’99” -9999’99” Performs fast reverse or fast forward. *1 Displays the “MIXTRAX” screen. MIXTRAX on page 33 *2 Selects a file from the list.
iPhone or smartphone applications Displays the launcher application screen. Displays the previous screen. AppRadioOne/MirrorLink Abcdefg Abcdefg Abcdefg Abcdefg Abcdefg 6/10 21 48 Displays the current source. Displays the menu screen. p In AppRadioOne and MirrorLink Mode, App control side bar will appear. p Press the DISP button to hide the App control side bar. Press the DISP button again to display it again. and are not available depending on the type of p device.
iPhone or smartphone applications Setting the keyboard language with the application for iPhone on page 35 Starting procedure Displaying the image of your application When connecting a MirrorLink device to this product, you must select the method for connecting your device. Settings are required according to the connected device.
Pandora® Gives a “Thumbs Down” to the playing track and skips to the next track. *1 *2 Playback screen 1 Pandora 6/10 Pandora p By pressing the 21 48 *1 Abcdefghi ABC 9999’99” button, you can skip songs forward. WARNING Abcdefghi Abcde Selects a Pandora station from the list.
Pandora® ● : deletes the station. p Shared stations are indicated by Bluetooth audio player Playback screen 1 Add station 1 Touch X7700BT . 6/10 . 2 Touch [Track] (from track) or [Artist] (from artist). A new station is created. 21 48 Bluetooth Abcdefghi Abcdefghi ABC House 9999 9999’99” or button, you can also p By pressing and hold the perform fast reverse or fast forward. p Before using the Bluetooth audio player, register and connect the device to this product.
AUX source 6/10 AUX 21 48 AV input Setting the video signal When you connect this product to an AUX equipment, select the suitable video signal setting. p You can operate this function only for the video signal input into the AUX input. 1 Display the “Video Setup” screen. is only available when there are both audio and video files on the auxiliary equipment. p A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection.
AV input MIXTRAX Deactivates the MIXTRAX mode. (Example: iPod) 2 Touch [Video Signal Setting]. 3 Touch [AV]. 6/10 iPod ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi 4 Touch the item you want to set. The following items are available: Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM. . , and then [AV Source Settings]. Setting the playback portion Pops 99999/99999 9999’99” 1 Press 2 Touch 3 Touch [MIXTRAX Settings].
MIXTRAX 3 Touch the item you want to set. The following items are available: Standard (default), Simple, Custom When you select “Custom”, check the effect that you want. Setting the flash pattern The flashing color changes with the changes in the sound and bass levels. 1 Display the “MIXTRAX Settings” screen. Displaying the “MIXTRAX Settings” screen on page 33 2 Touch [Flash Pattern]. System settings Displaying the “System” setting screen 1 Press 2 Touch .
System settings Selecting the system language ● If the embedded language and the selected language setting are not the same, text information may not display properly. ● Some characters may not be displayed properly. 1 Display the “System” setting screen. Displaying the “System” setting screen on page 34 2 Touch [System Language]. 3 Touch the language that you want to use. After the language is selected, the previous screen returns.
System settings Adjusting the picture You can adjust the picture for each source and rear view camera. CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake. Refer to Important Information for the User (a separate manual). “Dimmer” can be changed the setting or the time to switch it to on or off.
Audio adjustments Displaying the “Audio” setting screen 1 Press 2 Touch 1 Display the “Audio” setting screen. Displaying the “Audio” setting screen on page 37 2 Touch [Mute Level]. 3 Touch the item you want to set. . , and then . The “Audio” setting screen appears. Using fader adjustment 1 Display the “Audio” setting screen. ● ATT (default): The volume becomes 20 dB lower than the current volume. ● Mute: The volume becomes 0. ● Off: The volume does not change.
Audio adjustments 4 Drag the graph lines to the position you want to adjust. p The following items can also be set. ● ⁂⁚⁓⁗ : Switches the subwoofer phase between normal and reverse position. ● LPF/HPF: Switches the LPF/HPF setting to “On” or “Off”. p “All” is not available when “Network Mode” is selected as the speaker mode. Adjusting the speaker output levels finely This function is not available when adjusting the High speaker.
Audio adjustments Using the equalizer Recalling equalizer curves There are seven stored equalizer curves that you can easily recall at any time. Here is a list of the equalizer curves: ● S.Bass is a curve in which only low-pitched sound is boosted. ● Powerful is a curve in which low- and high-pitched sounds are boosted. ● Natural is a curve in which low- and high-pitched sounds are slightly boosted. ● Vocal is a curve in which the midrange, which is the human vocal range, is boosted.
Audio adjustments 1 Stop the vehicle in a quiet place, close all the doors, windows and sun roof, and then turn the engine off. If the engine is left running, engine noise may prevent correct Auto EQ. p If driving restrictions are detected during measurement, measurement is canceled. 2 Fix the microphone for acoustical measurement (sold separately) in the center of the headrest of the driver’s seat, facing forward. The Auto EQ may differ depending on where you place the microphone.
Theme menu Adjusts the brightness and the level of red, green and blue to create a favorite color. You can also change the screen for settings by touching [Illumination], [Theme] or [Background] on this screen. 3 Touch the item you want to set. 2 Touch [Illumination]. You can also change the screen for settings by touching [Theme], [Background] or [Utility] on this screen. 3 Touch the color you want. You can also adjust the color tone by dragging the color bar.
Setting up the video player Setting the top-priority languages You can assign the top-priority language to the top-priority subtitle, audio and menu in initial playback. If the selected language is recorded on the disc, subtitles, audio and menu are displayed or output in that language. p This setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”. Setting the subtitle language You can set a desired subtitle language.
Setting up the video player ● Letter Box: Makes the image in the shape of a letterbox with black bands on the top and bottom of the screen. ● Pan Scan: Cuts the image short on the right and left sides of the screen. When playing discs that do not have a panscan system, the disc is played back with “Letter Box” even if you select the “Pan Scan” setting. Confirm mark. whether the disc package bears the The TV aspect ratio cannot be changed for some discs. For details, refer to the disc’s instructions.
Setting up the video player Setting the video signal for the rear view camera When you connect a rear view camera to this product, select the suitable video signal setting. p You can operate this function only for the video signal input into the AV input. Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the “Favorites” screen. p Up to 12 menu items can be registered in the favorite menu.
Common operations Setting the time and date If you turn off this product or disconnect the iPod while transferring song information, the transfer may not successfully complete. 1 Touch the current time on the screen. While this product is storing song information, transfer to an iPod is not possible. Changing the wide screen mode on page 45 2 Touch date. or p When a video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different.
Other functions Restoring this product to the default settings You can restore settings or recorded content to the default settings. Various methods are used to clear user data. Method 1: Remove the vehicle battery Resets various settings registered to this product. p The settings configured on the “Theme” screen are not reset.
Connection or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car’s body. The ground wire of the power amp and the one of this unit or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire generation of smoke or malfunction.
Connection 9 Blue/white Connect to system control terminal of the power amp (max. 300 mA 12 V DC). a Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. b Power supply side c Parking brake switch d Ground side f SW L 3 L 3 6 R/M R 4 9 a b c 2 5 d e Perform these connections when using a subwoofer without the optional amplifier.
Connection On first-time startup on page 10 You can change the RCA output of the subwoofer depending on your subwoofer system. The subwoofer output of this product is monaural. iPhone with 30-pin connector iPhone and smartphone The USB interface cable for iPod / iPhone (CD-IU201V) (sold separately) is required for the connection. For details on how to connect an external device using a separately sold cable, refer to the manual for the cable.
Connection External video component and the display 1 3 2 3 8 2 1 NEVER install the rear display in a location that enables the driver to watch the video source while driving. This product’s rear video output is for connection of a display to enable passengers in the rear seats to watch the video source. 5 4 1 2 3 4 5 6 7 8 6 To Red, white To video output To audio outputs External video component (sold separately) The appropriate setting is required to use the external video component.
Installation Precautions before installation CAUTION Never install this product in places where, or in a manner that: ● Could injure the driver or passengers if the vehicle stops suddenly. ● May interfere with the driver’s operation of the vehicle, such as on the floor in front of the driver’s seat, or close to the steering wheel or shift lever. ● To ensure proper installation, be sure to use the supplied parts in the manner specified.
Installation Use any of binding screws (4 mm × 3 mm), binding screws (5 mm × 6 mm) or flush surface screws (5 mm × 6 mm), depending on the shape of screw holes in the bracket. 1 1 182 Fastening the front panel If you do not plan to detach the front panel, the front panel can be fastened with supplied screw.
Installation Appendix 1 Troubleshooting 1 2 If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Problems with the AV screen 2 1 Microphone clip 2 Clamps Use separately sold clamps to secure the lead where necessary inside the vehicle.
Appendix The icon is displayed, and operation is impossible. The operation is not compatible with the video configuration. — This operation is not possible. (For example, the DVD playing does not feature that angle, audio system, subtitle language, etc.) The picture stops (pauses) and this product cannot be operated. The reading of data is impossible during disc playback. — Stop playback once, then restart. The picture is stretched, with an incorrect aspect ratio.
his Appendix Check Device Device error message displayed in Pandora application. — Please check your connected device. Incompatible USB The connected USB storage device is not supported by this product. — Disconnect your device and replace it with a compatible USB storage device. Check USB The USB connector or USB cable has short-circuited. — Check that the USB connector or USB cable is not caught in something or damaged.
Appendix iTunes tagging Error-8D Built-in FLASH ROM encountered an error. — Turn the ignition switch to OFF and then to ON. Tag store failed. Tag information cannot be stored in this product. — Try again. Already stored. This tag information is already stored in memory. — Tag information can only be saved once for any given song. Tag information cannot be saved for the same song more than once. Memory full. Connect iPod. The tag information is successfully stored.
Appendix CD ● ● ● Detailed information for playable media AVCHD recorded discs Compatibility This unit is not compatible with discs recorded in AVCHD (Advanced Video Codec High Definition) format. Do not insert AVCHD discs. If inserted, the disc may not be ejected. Common notes about disc compatibility Playing DualDisc ● DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other. ● Playback of the DVD side is possible with this product.
Appendix Handling guidelines and supplemental information ● This product is not compatible with the Multi Media Card (MMC). ● Copyright protected files cannot be played back. ● If multiple subtitles are programed to display within a very short time frame, such as 0.1 seconds, the subtitles may not be displayed at the correct time. Common notes about DivX files Media compatibility chart Notes specific to DivX files ● Only DivX files downloaded from DivX partner sites are guaranteed for proper operation.
Appendix Bit rate: 8 kbps to 320 kbps (CBR) Sampling frequency: 8 kHz to 48 kHz DivX compatibility This product is not compatible with the following: DivX Ultra format, DivX files without video data, DivX files encoded with LPCM (Linear PCM) audio codec Depending on the file information composition, such as the number of audio streams, there may be a slight delay in the start of playback on discs. If a file contains more than 4 GB, playback stops before the end.
Appendix WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Appendix Using app-based connected content IMPORTANT Requirements to access app-based connected content services using this product: ● Latest version of the Pioneer compatible connected content application(s) for the smartphone, available from the service provider, downloaded to your smartphone. ● A current account with the content service provider. ● Smartphone Data Plan.
Appendix Specifications General Rated power source .......................................................... 14.4 V DC ( 10.8 V to 15.1 V allowable) Grounding system .......................................................Negative type Maximum current consumption ...................................... .... 10.0 A Dimensions (W × H × D): DIN Chassis ........................................ .... 180 mm × 50 mm × 160 mm (7-1/8 in. ×2 in. ×6-1/4 in.) Nose ...................................................
Appendix Power output ....................................... .... 14W RMS × 4 Channels (4Ω and ≦1 % THD+N) S/N ratio ....................................... 91dBA (reference: 1 W into 4Ω ) Specifications and design are subject to possible modifications without notice due to improvements.
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/ Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUE DU CANADA, INC. GARANTIE LIMITEE GARANTIE VALl DE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE GARANTIE Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc.
PIONEER ELECTRONICS OF CANADA, INC. PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSA in the U.S.A.
