Operation Manual

39
● Temperature:
Adjusts the color temperature, resulting in a better white
balance. (–3 to +3)
 With some pictures, you cannot adjust Hue and
Color.

When you touch [Rear View], the mode changes
to the selected camera mode. By touching
[Source], [Navi] or [Apps], you can return to the
selected mode.
5 Touch , , , to adjust.

The adjustments of “Brightness”, “Contrast”
and “Dimmer” are stored separately when your
vehicle’s headlights are off (daytime) and on
(nighttime).

“Brightness” and “Contrast” are switched auto-
matically depending on whether the vehicle’s
headlights are on or off.

“Dimmer” can be changed the setting or the time
to switch it to on or off.
 Setting the dimmer on page 38
 The picture adjustment may not be available with
some rear view cameras.

The setting contents can be memorized
separately.
Displaying the rmware
version
1 Display the “System” setting screen.
 Displaying the “System” setting screen on page 37
2 Touch [System Information].
3 Touch [Firmware Information].
The “Firmware Information” screen appears.
Updating rmware
CAUTION
● The USB storage device for updating must contain only the
correct update file.
●
Never turn this product off, disconnect the USB storage
device while the firmware is being updated.
●
You can only update the firmware when the vehicle is
stopped and the parking brake is engaged.
1 Download the firmware update files.
2 Connect a blank (formatted) USB storage
device to your computer, and then locate the
correct update file and copy it onto the USB
storage device.
3 Connect the USB storage device to this
product.
4 Turn the source off.
 Source on the AV source selection screen on page 11
5 Display the “System” setting screen.
 Displaying the “System” setting screen on page 37
6 Touch [System Information].
7 Touch [Firmware Update].
8 Touch [Continue] to display the data transfer
mode.
p Follow the on-screen instructions to finish updating the
firmware.
p
This product will reset automatically after the firmware
update is completed if the update is successful.
p
If an error message appears on the screen, touch the display
and perform the above steps again.
< CRB4933-A >
System settings