English AVH-X7700BT DVD RDS AV RECEIVER Operation Manual
Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Important The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Registration and connec- tion of Bluetooth device................................
Contents Adjusting the speaker output levels finely........41 Adjusting the time alignment...........................41 Switching the time alignment preset................41 Using the equalizer.........................................42 Adjusting the equalizer curve automatically (Auto EQ)...................................................42 Saving the sound settings...............................43 Loading the sound settings.............................43 ■ Theme menu.....................
Precaution Certain country and government laws may prohibit or restrict the placement and use of this product in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of this product. If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Precaution To avoid battery exhaustion Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery. WARNING Do not install this product in a vehicle that does not have an ACC wire or circuitry available. Rear view camera With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. WARNING ● SCREEN IMAGE MAY APPEAR REVERSED.
Precaution Important ● Handle the front panel with care when removing or attaching it. ● Avoid subjecting the front panel to excessive shock. ● Keep the front panel out of direct sunlight and high temperatures. ● If removed, replace the front panel on the unit before starting up your vehicle. ● To avoid damaging the device or vehicle interior, remove any cables and devices attached to the front panel before detaching it.
Basic operation Checking part names and functions 5 6 1 7 TRK ( / ) button button OPEN/ CLOSE button Performs manual seek tuning, fast forward, reverse and track search controls. Opening and closing the LCD panel Press to display the top menu screen. Press and hold to activate the voice recognition function. Using the voice recognition function (for iPhone) on page 16 Press OPEN/CLOSE to open the LCD panel. To close the LCD panel, press OPEN/CLOSE again.
Basic operation Turning the LCD panel horizontally When the LCD panel is upright and hinders the operation of the air conditioner, the panel can be turned horizontally temporarily. 1 Press and hold OPEN/CLOSE to display the flap menu. 2 Touch the flip down temporarily key to flip the LCD panel down to the horizontal position. Adjusting the LCD panel angle Returning the panel to the upright position.
Basic operation 1 USB cable 2 USB storage device Check that no data is being accessed before pulling out the USB storage device. On first-time startup Switching the speaker mode Restore the default setting. Restoring the default settings on page 52 1 Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. The “Select Program Language” screen appears. p From the second time on, the screen shown will differ depending on the previous conditions.
Basic operation How to use the screens *4 Application menu screen Time and date setting screen 10 Abcdefg Abcdefg Abcdefg Abcdefg 6 2014 Month/Date 6/10 22 Setting menu screen 21 48 Application operation screen Source Select Top menu screen *1 12hour 24hour *2 6/10 *4 System d/m/y m/d/y y/m/d Time Format Depending on the connection method, the "smartphone setup" screen is displayed.
Basic operation *2 By pressing the *3 When you connect the external navigation system to this unit, the navigation mode key is displayed at the left bottom of the display. *4 By pressing the MODE button you can switch between the Application screen and the AV operation screen. *5 When you connect a MirrorLink device to this unit, the current app icon is displayed instead of recent apps and shortcut app. button on any screen you can display the Top menu screen.
Basic operation Operating list screens 1 2 Songs Music Playlist abcdefghi Artist abcdefghi 3 Alburm abcdefghi Video Songs abcdefghi Podcast abcdefghi 1 Touching an item on the list allows you to narrow down the options and proceed to the next operation. 2 Appears when all characters are not displayed on the display area. If you touch the key, the rest are scrolled for display. 3 Appears when items cannot be displayed on a single page. Drag the scrubber bar or the list to view any hidden items.
Registration and connection of Bluetooth device Displaying the “Bluetooth” screen 1 Press 2 Touch . , and then The “Bluetooth” screen appears. . 1 Display the “Bluetooth” screen. Displaying the “Bluetooth” screen on page 13 2 Touch [Auto Connect] to switch “On” (default) or “Off”. Deleting a registered device 1 Display the “Bluetooth” screen. Never turn this product off while the paired Bluetooth device is being deleted. p If three devices are already paired, “Memory Full” is displayed.
Registration and connection of Bluetooth device p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p You need to store the version up file to the USB storage device in advance. CAUTION Never turn this product off and never disconnect the phone while the software is being updated. 1 Connect the USB storage device stored the version up file to this unit. Plugging and unplugging a USB storage device on page 8 2 Display the “Bluetooth” screen.
Hands-free phoning Bluetooth telephone connected indicator The device number of the connected device is displayed. Reception status of the cellular phone Battery status of the cellular phone Phone Book *1 abcdefghi abcdefghi *5 A abcdefghi C D 1 Press The following items are available: : Received call list ● ● : Dialed call list ● : Missed call list . . F G *1 Displays the preset dial screen. Using the preset dial lists on page 15 *2 Switches to the phone book list.
Hands-free phoning 2 Touch to end the call. Minimizing the dial confirmation screen or to turn private mode on or Adjusting the other party’s listening volume p The dial confirmation screen cannot be minimized on the AV operation screen. p AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call. This product can be adjusted to the other party’s listening volume. Touch . Touch again.
Setup for iPod / iPhone or smartphone When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device. The basic flow of iPod / iPhone or smartphone setup 1 Select the method for connecting your device. Setting the device connection method on page 17 2 Connect your device to this product. Connection, refer to installation manual.
Setup for iPod / iPhone or smartphone Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows. iPod / iPhone with a 30-pin connector Device connection method Smartphone Setup Bluetooth connection Available sources Device Connection iPod (audio) iPod (video) When connecting via Bluetooth iPhone / iPod Wireless via BT Bluetooth connection is required.
Radio Displays the preset channel list. Select an item on the list ("1" to "6") to switch to the preset channel. Displaying the “Radio settings” screen on page 19 1 Display the “AV source selection” screen. 2 Touch [Local]. 3 Touch the item you want to set. Selects the FM1, FM2, FM3, MW or LW band. Radio 1 2 3 4 5 6 6/10 21 48 FM1 MW Abcdefghi Abcdefghi Abcdefghi Seek Performs manual tuning. HOLD Performs seek tuning or non stop seek tuning.
Radio Displaying the “Radio settings” screen on page 19 2 Touch [Alternative FREQ] to switch “On”(default) or “Off”. Setting the Auto PI search When you switch to the broadcast station containing RDS data, searches for the same PI (Program Identification) code broadcast station from all frequency band automatically. 1 Display the “Radio settings” screen. Displaying the “Radio settings” screen on page 19 2 Touch [Auto PI] to switch “On” or “Off” (default).
Disc Track number indicator Hides the touch panel keys. To display again the keys, touch anywhere on the screen. Audio source screen 1 CD 6/10 21 48 Performs frame-by-frame playback. *1 ẂTrack 99 HOLD Ẃ99 9999’99” Pause -9999’99” *2 Performs slow-motion playback. Stop Each time you touch it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2 99 DVD Switches between playback and pause.
Disc Video source screen 2 DVD 6/10 or , you can also skip files/chapters p By pressing forward or backward. or , you can also perform p By pressing and holding fast reverse or fast forward. appears. p If a Video-CD with PBC On is being played, p Changing the wide screen mode. Common operations on page 50 You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product.
Disc p The way to display the menu differs depending on the disc. If you touch directly.
Compressed audio files Playback screen 1 (Example: USB) USB 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi Abcdefghi ABC Plays files in random order. *1 : Does not play files in random order. *2 : Plays all files within the repeat range in random order. *3 R&B 9999’99” -9999’99” Playback screen 2 (Example: USB) USB 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi Abcdefghi *4 Skips files forward or backward. ABC R&B *4 Displays the link search screen. This function is available for the USB storage device only.
Compressed audio files Selecting files from the file name list You can find files or folders to play back using the file name or folder name list. 1 Touch Switches the media file type to video. ● CD-DA: Switches the media file type to CD (audio data (CD-DA)). ● Photo: Switches the media file type to still image (JPEG data). . 2 Touch a file on the list to play back. p Files are played back in file number order.
Compressed video files Hides the touch panel keys. To display again the keys, touch anywhere on the screen. (Example: Disc) ROM 6/10 ROM 21 48 Abcdefghi 9999’99” 9999 99999 01 9999’99” Pause OFF ᵏᵍᵐ Pause OFF ᵏᵍᵐ -9999’99” *2 *3 -9999’99” Performs fast reverse or fast forward. Touch again to change the playback speed. Sets a repeat play range.
Still image files USB Hides the touch panel keys. To display again the keys, touch anywhere on the screen. Rotates the displayed picture 90° clockwise. Abcdefghi Selects the previous or next folder. 6/10 21 48 Plugging and unplugging a USB storage device on page 8 p Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. 3 Touch [USB]. The image is displayed on the screen.
Still image files 3 Touch “Yes” to overwrite the image. p Each one image can be saved for AV screen or Home screen. If you save the other image, the current wallscreen is overwritten. Setting the slideshow interval JPEG files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set. p This setting is available during playback of the JPEG files. 1 Display the “Video Setup” screen. 2 Touch [Time Per Photo Slide]. 3 Touch the item you want to set.
iPod Audio source screen 1 iPod 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi : Plays album randomly. Video source screen iPod 6/10 21 48 Abcdefghi *3 Audio source screen 2 Pops 99999/99999 9999’99” : Plays randomly songs or videos within the selected list. *2 Abcdefghi ABC Plays files in random order. *1 -9999’99” Skips files forward or backward. iPod *4 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 99999/99999 21 48 Full Abcdefghi 9999’99” -9999’99” Abcdefghi ABC Performs fast reverse or fast forward.
iPod iPod audio and/or video sources are enabled if either of the cables is connected. For details on how to connect an iPhone with 30-pin connector, refer to the installation manual. Via Bluetooth wireless technology Registering your Bluetooth devices on page 13 For iPod / iPhone with a Lightning connector users Via USB cable p With a USB interface cable for iPod/iPhone (CD-IU52) (sold separately), iPod audio source is available. However, functions related to iPod video files are not available.
iPhone or smartphone applications Displays the launcher application screen. Displays the previous screen. AppRadio Mode/MirrorLink Abcdefg Abcdefg Abcdefg Abcdefg Abcdefg 6/10 21 48 Displays the current source. Displays the menu screen. p In AppRadioMode and MirrorLink Mode, App control side bar will appear. p Press the DISP button to hide the App control side bar. Press the DISP button again to display it again. and are not available depending on the type of p device.
iPhone or smartphone applications Displaying the image of your application You can set an image of an application for your device, which is not compatible with [AppRadioMode], to be shown on the screen. p Depending on the type of application, you may not be able to see the image on the screen. p When you use this function on iPhone with Lightning connector, do not connect other devices via Bluetooth wireless technology. p You can only control the application on the connected device.
Bluetooth audio player Playback screen 1 Bluetooth 6/10 21 48 Abcdefghi Abcdefghi ABC House 9999 9999’99” -9999’99” p Before using the Bluetooth audio player, register and connect the device to this product. Registering your Bluetooth devices on page 13 p Depending on the Bluetooth device connected to this product, the available operations with this product may be limited or differ from the descriptions in this manual.
AUX source AUX 6/10 21 48 Switches between the screen to operate video files and that to operate music files. is only available when there are both audio and video files on the auxiliary equipment. p A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection. — For details on how to connect the external video component, refer to the installation manual. p CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion.
AV input You can display the video image output by the device connected to this product. p For details on how to connect the external video component, refer to the installation manual. 1 Display the “Video Setup” screen. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. Starting procedure 2 Touch [Video Signal Setting]. 3 Touch [AV]. 4 Touch the item you want to set.
MIXTRAX Deactivates the MIXTRAX mode. (Example: iPod) iPod 6/10 ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 21 48 Abcdefghi 2 Touch . , and then [AV Source Settings]. Setting the playback portion Pops 99999/99999 9999’99” 1 Press 3 Touch [MIXTRAX Settings]. Abcdefghi ABC Displaying the “MIXTRAX Settings” screen -9999’99” You can specify the playback portion. 1 Display the “MIXTRAX Settings” screen. Displaying the “MIXTRAX Settings” screen on page 36 2 Touch [Short Playback Mode]. Selects a track.
System settings Displaying the “System” setting screen 1 Press 2 Touch . , and then . The “System” setting screen appears. Activating the Bluetooth audio source 1 Display the “System” setting screen. Displaying the “System” setting screen on page 37 2 Touch [AV Source Settings]. 3 Touch [Bluetooth Audio] to switch “On” (default) or “Off”. Setting the ever scroll When “Ever Scroll” is set to “On”, the recorded text information scrolls continuously in the display.
System settings 3 Touch the language that you want to use. After the language is selected, the previous screen returns. Adjusting the response positions of the touch panel (touch panel calibration) If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
System settings ● Temperature: Adjusts the color temperature, resulting in a better white balance. (–3 to +3) With some pictures, you cannot adjust Hue and Color. When you touch [Rear View], the mode changes to the selected camera mode. By touching [Source], [Navi] or [Apps], you can return to the selected mode. 5 Touch , , , to adjust. The adjustments of “Brightness”, “Contrast” and “Dimmer” are stored separately when your vehicle’s headlights are off (daytime) and on (nighttime).
Audio adjustments Displaying the “Audio” setting screen 1 Press 2 Touch 2 Touch [Mute Level]. 3 Touch the item you want to set. . , and then . The “Audio” setting screen appears. Using fader adjustment 1 Display the “Audio” setting screen. Displaying the “Audio” setting screen on page 40 2 Touch [Fader]. 3 Touch or balance. to adjust the front/rear speaker p “Front25” to “Rear25” is displayed as the front/rear speaker balance moves from the front to rear. p The default setting is “F/R 0”.
Audio adjustments 4 Drag the graph lines to the position you want to adjust. p The following items can also be set. ● ⁂⁚⁓⁗ : Switches the subwoofer phase between normal and reverse position. ● LPF/HPF: Switches the LPF/HPF setting to “On” or “Off”. This function is not available when adjusting the High speaker. Touch or to switch the adjusting speaker. Switching the rear speaker output 1 Turn the source off. 2 Display the “Audio” setting screen.
Audio adjustments Using the equalizer Recalling equalizer curves There are seven stored equalizer curves that you can easily recall at any time. Here is a list of the equalizer curves: ● S.Bass is a curve in which only low-pitched sound is boosted. ● Powerful is a curve in which low- and high-pitched sounds are boosted. ● Natural is a curve in which low- and high-pitched sounds are slightly boosted. ● Vocal is a curve in which the midrange, which is the human vocal range, is boosted.
Audio adjustments 1 Stop the vehicle in a quiet place, close all the doors, windows and sun roof, and then turn the engine off. If the engine is left running, engine noise may prevent correct Auto EQ. p If driving restrictions are detected during measurement, measurement is canceled. 2 Fix the microphone for acoustical measurement (sold separately) in the center of the headrest of the driver’s seat, facing forward. The Auto EQ may differ depending on where you place the microphone.
Theme menu Selecting the background display The background display can be selected from 9 different preset displays for the AV operation screen and 6 different preset displays for the Top menu screen. Furthermore, you can change the background display to other images imported from an USB storage device. 1 Display the “Theme” screen. Adjusts the brightness and the level of red, green and blue to create a favorite color. 2 Touch [Illumination].
Theme menu You can also change the screen for settings by touching [Illumination], [Theme] or [Background] on this screen. 3 Touch the item you want to set. ● Preset images: Selects the desired preset clock image. ● (off): Hides the clock display. You can preview the Top menu screen or the AV operation screen by touching [Home] or [AV] respectively.
Setting up the video player Setting the top-priority languages You can assign the top-priority language to the top-priority subtitle, audio and menu in initial playback. If the selected language is recorded on the disc, subtitles, audio and menu are displayed or output in that language. p This setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”. Setting the subtitle language You can set a desired subtitle language.
Setting up the video player ● Letter Box: Makes the image in the shape of a letterbox with black bands on the top and bottom of the screen. ● Pan Scan: Cuts the image short on the right and left sides of the screen. When playing discs that do not have a panscan system, the disc is played back with “Letter Box” even if you select the “Pan Scan” setting. Confirm mark. whether the disc package bears the The TV aspect ratio cannot be changed for some discs. For details, refer to the disc’s instructions.
Setting up the video player Setting the video signal for the rear view camera When you connect a rear view camera to this product, select the suitable video signal setting. p You can operate this function only for the video signal input into the AV input. 1 Display the “Video Setup” screen. 2 Touch [Video Signal Setting]. 3 Touch [Camera]. The pop-up menu appears. 4 Touch the item you want to set. ● Auto (default): Adjusts the video signal setting automatically. ● PAL: Sets the video signal to PAL.
Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the “Favorites” screen. p Up to 12 menu items can be registered in the favorite menu. Creating a shortcut 1 Display the “Settings” screen. 2 Touch the star icon of the menu item that you want to add to the favorite menu. The star icon for the selected menu is filled in. To cancel the registration, touch the star icon in the menu column again.
Common operations Changing the wide screen mode on page 50 1 Radio 1 2 3 4 5 6 6/10 Setting the time and date 21 48 FM1 MW 1 Touch the current time on the screen. Abcdefghi Abcdefghi Abcdefghi CD 2 Seek 6/10 21 48 ẂAbcdefghi Ẃ04 3 AV 6/10 21 48 2 Touch date. or to set the correct time and You can operate the following items: Year, month, date, hour, minute. p You can change the time display format to “12hour” (default) or “24hour”.
Common operations p When a video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different. p The video image will appear coarser when viewed in “Zoom” mode.
Other functions Restoring this product to the default settings You can restore settings or recorded content to the default settings. Various methods are used to clear user data. Method 1: Remove the vehicle battery Resets various settings registered to this product. p The settings configured on the “Theme” screen are not reset.
Appendix Troubleshooting If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Problems with the AV screen CD or DVD playback is not possible. The disc is inserted upside down. — Insert the disc with the label upward. The disc is dirty. — Clean the disc.
Appendix Sound from AppRadioMode of the Android device cannot be heard from the speakers of this unit. Depending on the Android device, the sound from AppRadioMode may not be output from the speakers of this unit. — Switch to “ Smartphone” in the “AppRadioMode Sound” settings.(Refer to 37) Error messages When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action.
Appendix USB was disconnected for device protection. Do not reinsert this USB memory into the unit. Please reset the unit. The USB connector or USB cable is short-circuited. — Check that the USB connector or USB cable is not caught in something or damaged. The connected USB storage device consumes more than maximum allowable current. — Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.
Appendix for use or handling of the disc. This is not a sign of the malfunction of this product. Consider it to be normal wear and tear. Playable discs DVD-Video compatible with the general CD standard, it may not be possible to play the CD side with this product. ● Frequent loading and ejecting of a DualDisc may result in scratches to the disc. ● Serious scratches can lead to playback problems on this product. In some cases, a DualDisc may become stuck in the disc-loading slot and will not eject.
Appendix ● It may not be possible to play some music files from USB because of file characteristics, file format, recorded application, playback environment, storage conditions, and so on. USB storage device compatibility For details about USB storage device compatibility with this product, refer to Specifications on page 61. ● Protocol: bulk ● You cannot connect a USB storage device to this product via a USB hub. ● Partitioned USB storage device is not compatible with this product.
Appendix WAV files on the CD-R/-RW, DVD-R/-RW/-R SL/-R DL cannot be played. USB storage device File extension: .wav Format: Linear PCM (LPCM) Sampling frequency: 16 kHz to 48 kHz Quantization bits: 8 bits and 16 bits AAC compatibility This product plays back AAC files encoded by iTunes. CD-R/-RW File extension: .m4a Bit rate: 8 kbps to 320 kbps (CBR) Sampling frequency: 8 kHz to 44.1 kHz DVD-R/-R SL/-R DL/ DVD-RW File extension: .m4a Bit rate: 8 kbps to 320 kbps (CBR) Sampling frequency: 8 kHz to 44.
Appendix Copyright and trademark notice Copyright (c) 1987, 1993, 1994 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Appendix Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store App Store is a service mark of Apple Inc. iOS iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries.
Appendix ● The product lifetime of the LED backlight is more than 10 000 hours. However, it may decrease if used in high temperatures. ● If the LED backlight reaches the end of its product lifetime, the screen will become dimmer and the image will no longer be visible. In that case, please consult your dealer or the nearest authorized Pioneer Service Station. Specifications General Rated power source........................................................... 14.4 V DC ( 10.8 V to 15.
PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/ Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
