Operation Manual

17
If no alternative Service Component can be found or reception
remains poor, this function will automatically switch to an
identical FM broadcast.
SOFT LINK
p This function is available when “Soft Link” is “On”.

Refer to Setting the Soft link on page 17
p
Only available in areas where SOFT LINK function is
supported.
p
The broadcast content of the switched channel may differ
from the content of the original channel.
When HARD LINK is unsuccessful, tunes to another ensemble
that supports the similar Service Component.
If no alternative Service Component can be found or reception
remains poor, this function will automatically switch to a similar
FM broadcast.
The default setting is “On”.
1 Display the “DAB settings” screen.
 Refer to Displaying the “DAB settings” screen on page 16
2 Touch [Service Follow] to switch “On” or “Off”.

Depending on the model used, this menu may not
be displayed.
Switching Digital Radio aerial power
supply
The default setting is “On”.

For details on how to connect a Digital Radio aerial, refer to
the installation manual.
1 Turn the source off.
 Refer to Selecting a source on page 9
2 Display the “DAB settings” screen.
 Refer to Displaying the “DAB settings” screen on page 16
3 Touch [Antenna Power] to switch “On” or
“Off”.
Receiving trafc announcements (TA)
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
1 Display the “DAB settings” screen.
 Refer to Displaying the “DAB settings” screen on page 16
2 Touch [TA Interrupt].
3 Touch the item.
 TA OFF (default):
Turns TA Interrupt off.

DAB+RDS TA:
Receives the traffic announcement from DAB and RDS.
The traffic announcement from DAB has a priority.

RDS TA ONLY:
Receives traffic announcements automatically from RDS
station only.
 Depending on the model used, this menu may not
be displayed.
Setting the Soft link
The default setting is “Off”.
p
This function is available when “Service Follow” is “On”.

Refer to Setting the service follow on page 16
p
Only available in areas where SOFT LINK function is
supported.
1 Display the “DAB settings” screen.
 Refer to Displaying the “DAB settings” screen on page 16
2 Touch [Soft Link] to switch “On” or “Off”.

Depending on the model used, this menu may not
be displayed.
Radio
4821
1
2
3
4
5
6
6/10
MWFM1
Abcdefghi
Abcdefghi
Abcdefghi
Seek
Selects the FM1, FM2, FM3,
MW or LW band.
Performs manual tuning.
Performs seek tuning or
non stop seek tuning.
Releasing the key in a few seconds, skips
to the nearest station from the current
frequency.
Keeping holding the key for a long
seconds, performs non stop seek tuning.
Displays the preset channel list.
Select an item on the list ("1" to "6")
to switch to the preset channel.
Recalls the preset channel
stored to a key from memory.
Stores the current broadcast
frequency to a key.
HOLD
HOLD
Stores song information to an iPod.
 Refer to Storing song information to an iPod
(iTunes Tagging) on page 45
p
By pressing or , you can also switch the preset
channels.
p
By pressing and hold or and release, you can
also perform seek tuning.
Radio
< CRB4721-B >
Digital Radio Radio