Owner's Manual

38
Setting the video signal
When you connect this product to an AUX equipment, select the
suitable video signal setting.
The default setting is “Auto”.
p
You can operate this function only for the video signal input
into the AUX input.
1 Display the “Video Setup” screen.
2 Touch [Video Signal Setting].
3 Touch [AUX].
4 Touch the item.
The following items are available:
Auto, PAL, NTSC, PAL-M, PAL-N, SECAM.
 Refer to Displaying the “SiriusXM settings” screen on page
37
2 Touch [Featured Favorites] to switch “On” or
“Off”.
p If the Featured Favorite Band needs to update, the Featured
Band Update message will appear.
How to access
When there is a Featured Favorite, access it with the band key.
1 Touch the band key.
SXM1—SXM2—SXM3—FF
When there are multiple Featured Favorites, access them from
the category list.
It is displayed at the bottom of the category list.

Refer to Selecting a channel from the category list on page
36
Setting Featured Band Update
Message
To display “Featured Band Update Message” at all times,
“Featured Favorites” needs to be set to “On”.
The default setting is “On”.
1 Display the “SiriusXM settings” screen.
 Refer to Displaying the “SiriusXM settings” screen on page
37
2 Touch [Featured Band Update Message] to
switch “On” or “Off”.
Restoring the “SiriusXM
Settings” to the default
You can restore the SiriusXM settings to the default.
p
This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the “SiriusXM settings” screen.
 Refer to Displaying the “SiriusXM settings” screen on page
37
2 Touch [SiriusXM Reset].
3 Touch [Restore].
The settings are restored to the default.
p
The source is turned off and the Bluetooth connection is
disconnected before the process starts.
AUX
4821
Full
6/10
Switches between the video input
and the sound input.
p A Mini-jack AV cable (CD-RM10) (sold separately) is required
for connection.

Refer to External video component and the display on page
56
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure
You can display the video image output by the device connected
to video input.
1 Display the “System” setting screen.
2 Touch [Input/Output settings].
3 Confirm that “AUX Input” is turned on.
4 Display the “AV source selection” screen.
5 Touch [AUX].
The image is displayed on the screen.
AUX source
38 < CRD4924-B >< CRD4924-B >
SiriusXM
®
Satellite Radio
AUX source AUX source