Owner's Manual

29
4821
Abcdefg Abcdefg Abcdefg Abcdefg Abcdefg
6/10
AppRadioOne
Displays the launcher
application screen.
Displays the previous screen.
Displays the menu screen.
Displays the current source.
p Press the DISP button to hide the App control side bar. Press
the DISP button again to display it again.
p
and are not available depending on the type of
device.
WARNING
Certain uses of an iPhone or a smartphone may not be
legal while driving in your jurisdiction, so you must be
aware of and obey any such restrictions.
If in doubt as to a particular function, only perform it
while the car is parked.
No feature should be used unless it is safe to do so
under the driving conditions you are experiencing.
Using AppRadioOne
You can control applications for an iPhone or a smartphone
directly from the screen (AppRadioOne).
In AppRadioOne, you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
p
The compatible finger gestures vary depending on the
application for an iPhone or a smartphone.
p Even though an application is not compatible with
AppRadioOne, depending on the application an image may
be displayed. But you can not operate the application.
To use AppRadioOne, install the AppRadio app on the iPhone
or smartphone in advance. For details about the AppRadio app,
visit the following site:
For U.S.A.
http://www.pioneerelectronics.com/AppRadioOne
For Canada
http://www.pioneerelectronics.ca/AppRadioOne
p
Be sure to read Using app-based connected content before
you perform this operation.

Refer to Using app-based connected content on page 67
 Pioneer is not liable for any issues that may arise from
incorrect or flawed app-based content.

The content and functionality of the supported
applications are the responsibility of the App providers.

In AppRadioOne, functionality through the product is
limited while driving, with available functions determined
by the App providers.

Availability of AppRadioOne functionality is determined
by the App provider, and not determined by Pioneer.

AppRadioOne allows access to applications other than
those listed (subject to limitations while driving), but the
extent to which content can be used is determined by the
App providers.
Starting procedure
When connecting an iPhone or smartphone to this product, you
must select the method for connecting your device. Settings are
required according to the connected device.

Refer to Setup for iPod / iPhone or smartphone on page 16
For iPhone users
1 Connect your iPhone.
 Refer to iPhone with Lightning connector on page 55
2 Press .
3 Touch [APPS].
When the application is ready to launch, messages appear on
the screen of this product.
4 Use your iPhone to launch the application.
The AppRadio app is launched.
5 Touch [OK].
The AppRadioOne screen (Application menu screen) appears.
For smartphone (Android) users
1 Unlock your smartphone and connect it to this
product via USB.
 Refer to Android device on page 56
2 Press .
3 Touch [APPS].
The AppRadio app is launched, and the AppRadioOne screen
(Application menu screen) appears.
Common operation of all device
p If you connect your device while an AppRadioOne-
compatible application is already running, the application
operation screen will appear on this product.
p
Touch the desired application icon after the AppRadio app is
launched.
p
The desired application is launched, and the application
operation screen appears.
p
Press to go back to the Top menu screen.
Using the keyboard
When you tap the text input area of an application for iPhone,
a keyboard will be displayed on the screen. You can input the
desired text directly from this product.
CAUTION
For your safety, the keyboard functionality is only available
when the vehicle is stopped and the parking brake is engaged.
p
This function is only available in AppRadioOne on the
iPhone.
1 Start up the AppRadioOne.
 Refer to Starting procedure on page 29
2 Touch the text input area on the application
operation screen.
A keyboard for entering text appears.
p
The language of the keyboard can be changed.
 Refer to Setting the keyboard language with the application for
iPhone on page 42
Using the audio mix function
You can output audio mixing AV source and an application for
iPhone or smartphone when the AppRadioOne is used.
p
Depending on the application or the AV source, this function
may not be available.
1 Start up the AppRadioOne.
AppRadioOne
5 Start playback of the selected list.
p Depending on the generation or version of the iPod, some
functions may not be available.
p
You can play playlists created with the MusicSphere applica-
tion. The application is available on our website.
Using this product’s iPod func-
tion from your iPod
You can control this product’s iPod function from the iPod on
“App Mode”. The application screen of the iPod can be dis-
played on this product, and the music files and video files are
played back with this product.
p
This function is not available when using iPod function with
an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5,
or iPod touch (5th generation).
p
While this function is in use, the iPod will not turn off even if
the ignition key is turned off. Operate the iPod to turn off the
power.
1 Touch .
2 Operate the connected iPod to select a video or
song and play.
p Some functions are still accessible from this product even if
the control mode is set to “App Mode”. However, the opera-
tion will depend on your applications.
p
Touch to switch the control mode.
Selecting a song from the list
related to the song currently
playing (link search)
p If you touch the artwork, the list of songs in the album is
displayed.
1 Touch song information to open the list of
songs.
2 Touch the song to play back.
29
< CRD4924-B >
iPod AppRadioOne