Operation Manual

18
If no alternative Service Component can be found or reception
remains poor, this function will automatically switch to an identi-
cal FM broadcast.
SOFT LINK
p This function is available when “Soft Link” is “On”.

Setting the Soft link on page 18
p
Only available in areas where SOFT LINK function is
supported.
p
The broadcast content of the switched channel may differ
from the content of the original channel.
When HARD LINK is unsuccessful, tunes to another ensemble
that supports the similar Service Component.
If no alternative Service Component can be found or reception
remains poor, this function will automatically switch to a similar
FM broadcast.
1 Display the “DAB settings” screen.
 Displaying the “DAB settings” screen on page 17
2 Touch [Service Follow] to switch “On” (default)
or “Off”.

Depending on the model used, this menu may not
be displayed.
Switching Digital Radio antenna
power supply
p For details on how to connect a Digital Radio antenna, refer
to the installation manual.
1 Turn the source off.
 Source on the AV source selection screen on page 9
2 Display the “DAB settings” screen.
 Displaying the “DAB settings” screen on page 17
3 Touch [Antenna Power] to switch “On”
(default) or “Off”.
Receiving trafc announcements (TA)
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
1 Display the “DAB settings” screen.
 Displaying the “DAB settings” screen on page 17
2 Touch [TA Interrupt].
3 Touch the item you want to set.
● TA OFF (default):
Turns TA Interrupt off.
●
DAB+RDS TA:
Receives the traffic announcement from DAB and RDS.
The traffic announcement from DAB has a priority.
●
RDS TA ONLY:
Receives traffic announcements automatically from RDS
station only.
 Depending on the model used, this menu may not
be displayed.
Setting the Soft link
p This function is available when “Service Follow” is “On”.

Setting the service follow on page 17
p
Only available in areas where SOFT LINK function is
supported.
1 Display the “DAB settings” screen.
 Displaying the “DAB settings” screen on page 17
2 Touch [Soft Link] to switch “On” or “Off”
(default).

Depending on the model used, this menu may not
be displayed.
< CRB4947-A >
Digital Radio