DVD RDS AV RECEIVER Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Contents ■ Bluetooth ......................... 25 Bluetooth connection .............................................. Bluetooth settings..................................................... Hands-free phoning.................................................. Bluetooth audio ......................................................... 25 25 26 31 ■ Wi-Fi..................................
Basic operation ........................................................... 51 Starting procedure.................................................... 83 Basic operation ........................................................... 84 ■ iPod .................................. 57 ■ AV input ........................... 85 Connecting your iPod............................................... 57 Basic operation ........................................................... 57 Starting procedure....................
English HD Radio™ Technology ......................................... 136 SDXC ............................................................................ 136 WMA/WMV ................................................................ 136 FLAC............................................................................. 136 DivX.............................................................................. 137 AAC............................................................................... 137 WebLink......
Precaution Information to user –This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. –Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. –NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CAUTION This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2014, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. CLASS 1 LASER PRODUCT FEDERAL COMMUNICATIONS COMMISSION SUPPLIER'S DECLARATION OF CONFORMITY Product Name: DVD RDS AV RECEIVER Model Number: AVH-W4500NEX Responsible Party Name: PIONEER ELECTRONICS (USA), INC.
– Once you have established a comfortable sound level, set the dial and leave it there. ▶BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: Important safety information WARNING • Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
If your vehicle has a compliant backup camera that displays the backup view through the factory receiver, do not use the Pioneer receiver unless it is connected to and displays the same view as the factory backup camera. Connection to the factory backup camera will require an adaptor, sold separately. Not all vehicles may be able to connect. Please check with a qualified professional installer for installation options specific to your vehicle.
If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake. When using a display connected to V OUT WARNING NEVER install the rear display in a location that enables the driver to watch video images while driving.
Handling the SD card slot CAUTION Handling the USB connector CAUTION • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
1 2 3 Receive updates on the latest products and technologies. Download owner’s manuals, order product catalogs, research new products, and much more. Receive notices of software upgrades and software updates. Protecting the LCD panel and screen • Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.
Parts and controls Main unit English LCD screen VOL (+/-) Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 95). Press to display the top menu screen. Press and hold to power off. To power back on, press any button. Press to display the menu bar (page 21). Press and hold to mute or unmute.
Press to activate the voice recognition mode with a connected iPhone or smartphone. Press and hold to display the connectable device list screen or device search screen. Press to reset the microprocessor (page 17). Refer to Inserting and ejecting an SD memory card (page 49). Use to connect a microphone for acoustical measurement (sold separately). Refer to Inserting and ejecting a disc (page 44).
RETURN or or Protecting your product against theft CAUTION • Do not attempt to detach the front panel while DISC/SD is in the eject position. • Do not attempt to detach the front panel while data is being written to USB/SD. Doing so may cause the data to become corrupted. • After the front panel has been detached, the attaching plate will move back to its original position automatically. Be careful not to let hands or other objects get caught behind the monitor as it is moving back.
English 4 Put the front panel into the provided protective case for safe keeping. Attaching the front panel 1 Slide the front panel into the top of the product and push it into place. Slide the inserter on the front panel into the insertion slot on top of the unit and push it into place. 2 Push on the bottom of the front panel until it clicks into place.
English - 16 -
Basic operation Notes on using the LCD panel CAUTION • Do not open or close the LCD panel forcefully. It may cause a malfunction. • Do not operate this product until the LCD panel has completely opened or closed. If this product is operated while the LCD panel is opening or closing, the LCD panel may stop at that angle for safety. • Do not place glass or can on the open LCD panel. Adjusting the LCD panel angle 1 2 3 Press . Touch or to adjust the angle of the LCD panel. Touch .
Preparing the remote control Remove the insulation sheet before use. How to replace the battery English Insert the CR2025 (3 V) battery with the plus (+) and minus (-) poles orientated properly. WARNING • Do not ingest the battery, Chemical Burn Hazard. (The remote control supplied with) This product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.
NOTE The remote control may not function properly in direct sunlight. Important • Do not store the remote control in high temperatures or direct sunlight. • Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas pedal. English Starting up the unit 1 2 3 4 Start the engine to boot up the system. The [Select Program Language] screen appears. NOTES • From the second time on, the screen shown will differ depending on the previous conditions.
Switching the speaker mode To change the speaker mode, you need to restore this product to the default settings. 1 Restore the default setting (page 120). You can operate this product by touching the keys on the screen directly with your fingers. NOTE To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. Common touch panel keys : Returns to the previous screen. : Close the screen.
Operating the time bar Operating the menu bar 1 Press . The menu bar pops up on the screen. NOTE The menu bar availability may vary depending on the activating source. Switches the dimmer duration by day or night. Switches between playback and pause. Skips files forward or backward. Performs fast reverse or fast forward. Displays setting menu screen (page 94). Closes the menu bar. Switching the operation panel 1 Touch or .
The hidden function keys appear. NOTE This key does not appear for some AV sources. Operating the on-screen keyboard English Displays the characters that are entered. Moves the cursor to the right or left for a number of characters equivalent to the number of touches. Enters the characters in the text box. Deletes the input text to the left of the cursor one letter at a time. Touching and holding the key deletes the letters to the left of the cursor in rapid succession.
Top menu screen English Favorite source icons TIPS • When you connect the external navigation system to this unit, the navigation mode key is displayed at the middle of the right side of the display. • If you select [Power OFF], you can turn off almost all functions. The [Power OFF] mode is released in the following cases. – An incoming call is received (only for hands-free phoning via Bluetooth). – A rear view camera image is input when the vehicle is in reverse. – A button on this unit is pressed.
Connected device key Displays connected device. Switches the source or application with connected devices such as WebLink, external navigation system, Apple CarPlay, Android Auto. 1 Touch and hold . appears at the top right of the favorite application key. 2 Drag to the desired position. To finish the adjusting, touch any place of the display except for the favorite application key. • You can also switch the mobile device to be connected with the following steps. 1 Touch . 2 Touch .
Bluetooth Bluetooth connection 4 5 6 Turn on the Bluetooth function on the device. Press . Touch then . The Bluetooth screen appears. Touch [Connection]. Touch . The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list.
Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device. To disconnect the device, touch the name of the connected device in the list. NOTE Connect the Bluetooth device manually in the following cases: • Two or more Bluetooth devices are registered, and you want to manually select the device to be used.
English The following items are displayed. • Name of the current cellular phone • List number of the current cellular phone • Reception status of the current cellular phone • Battery status of the current cellular phone Using preset dial list (page 28) Using phone book Select a contact from the phone book. Touch the desired name on the list then select the phone number. TIPS • The contacts on your phone will be automatically transferred to this product. • Update the phone book manually.
Using the preset dial lists ▶Registering a phone number You can easily store up to six phone numbers per device as presets. 1 Press . 4 Touch . Touch or . On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch . ▶Dialing from the preset dial list 1 2 Touch . Touch the desired entry on the list to make a call. The dial screen appears and dialing starts. ▶Deleting a phone number 1 2 3 4 5 Press . Touch . Touch . Touch . Touch [Yes].
• For using this function with a smartphone, the device must be compatible with Android Auto. For using the voice recognition function with a smartphone, launch Android Auto beforehand. 1 2 3 Press . Touch . TIP You can also launch the voice recognition function by pressing . Minimizing the dial confirmation screen 1 Touch . TIP To display the dial confirmation screen, touch again. NOTES • The dial confirmation screen cannot be minimized on the AV operation screen.
Adjusting the other party’s listening volume This product can be adjusted to the other party’s listening volume. 1 Touch to switch between the three volume levels. English Notes for hands-free phoning ▶General notes • Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed. • The line-of-sight distance between this product and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.
• If the phone book in the phone contains image data, the phone book may not be transferred correctly. • Depending on the cellular phone, phone book transfer may not be available. Bluetooth audio NOTES • Depending on the Bluetooth audio player connected to this product, the available operations with this product may be limited to the following two levels: – A2DP (Advanced Audio Distribution Profile): Only playing back songs on your audio player is possible.
English Switches between playback and pause. Skips files forward or backward. • By pressing then touch or backward. • By pressing then touch and hold reverse or fast forward. , you can also skip files forward or or , you can also perform fast Selects a file or folder from the list to playback. NOTE This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher. Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.
Wi-Fi You can connect your Wi-Fi certfied mobile device to this product via Wi-Fi connection. English Wi-Fi connection 1 2 3 4 5 6 7 Turn on the Wi-Fi function on the device. Press . Touch then . Touch [Wi-Fi Settings]. Set [Wi-Fi] to [ON]. Touch [Device Information]. Connect this product with the dislayed network name in [Device Information] from the mobile device. Wi-Fi settings 1 2 3 Press Touch . then . Touch [Wi-Fi Settings].
Wi-Fi audio Before using the Wi-Fi audio player, connect the device to this product via Apple CarPlay™ (page 64) or Android Auto wirelessly (page 68). Press then touch . Touch [Wi-Fi Audio]. The Wi-Fi audio playback screen appears. NOTES • [Wi-Fi Audio] is displayed as [Android Auto] when the Android Auto is in use. • [Wi-Fi Audio] is displayed as [Apple CarPlay] when the Apple CarPlay is in use.
AV source Supported AV source Displaying the AV operation screen 1 Press then touch the AV operation key. The AV operation screen appears. - 35 - English You can play or use the following sources with this product. • HD Radio Broadcasts (HD Radio™ tuner) • CD • ROM (compressed audio or video files on discs) • DVD-Video • Video-CD The following sources can be played back or used by connecting an auxiliary device.
Displays the source list. Recalls equalizer curves (page 106). English Selecting a source Source on the AV source selection screen 1 2 Press then touch . Touch the source icon. When you select [Source OFF], the AV source is turned off. Source on the source list 1 2 3 Press then touch the AV operation key. Touch . Touch the source key. When you select [Source OFF], the AV source is turned off.
4 Drag the source key to the desired position. Adjusting the range of favorite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. 3 Press . Touch and hold . appears at the top left of the favorite source icons. Drag to the desired position. To finish the adjusting, touch any place of the display except for the favorite source icons area.
Setup for iPod®/iPhone® or smartphone NOTES • Operation methods may vary depending on the iPod/iPhone model or smartphone and its software version. • Depending on the software version of iPod/iPhone or the version of smartphone OS, it may not be compatible with this unit. • The setting may not be operable right after it is changed. • This setting is available only when a hands-free telephone is not used. • The setting will change after the following processes are automatically executed.
3 4 5 Touch [Smartphone Setup]. Touch [iPhone/iPod]. The available function icons are displayed. Touch [OK]. Smartphone (Android™ device) Compatible smartphones Compatibility with all smartphones is not guaranteed. For details about smartphone compatibility with this product, refer to the information on our website. 1 2 3 4 5 6 7 Press . Touch then . Touch [Smartphone-related Settings]. Touch [Smartphone Setup]. Touch [Others]. Touch [Android Auto] to use Android Auto.
HD Radio™ Technology About HD Radio stations AM band Analog AM Analog AM Digital AM FM band Analog FM Analog FM Digital FM Analog FM Digital FM-1ch Digital FM-2ch : Main channel : Sub channel Digital FM-3ch Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD. - 40 - English HD Radio stations offer high quality audio and data services.
Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content. Starting procedure 1 2 Press then touch . Touch [HD Radio]. The HD Radio screen appears.
Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Selects the FM1, FM2, FM3 or AM band. Performs manual tuning. Performs seek tuning or non stop seek tuning. Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform, performs non stop seek tuning. Switches the text display between the main channel and sub channels.
Radio settings 1 2 . Touch then . The system setting screen appears. English 3 4 Press Touch [AV Source Settings]. Touch [Radio Settings]. The menu items vary according to the source. Menu Item Description [Blending] [On] [Off] Switches to the analog broadcast of the same frequency level automatically when reception of a digital broadcast becomes weak. Select [Off] to receive only a digital signal. [Seek] Select the method of seek tuning.
Disc Inserting and ejecting a disc WARNING Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. CAUTION Do not insert anything other than a disc into the disc-loading slot. Inserting a disc 1 2 3 Press . Touch to open the LCD panel. Insert a disc into the disc-loading slot. The source changes and then playback will start. NOTE If the disc is already set, select [Disc] as the playing source.
Audio source Audio source screen 1 English Switches between playback and pause. Skips files forward or backward. Selects a track from the list. Touch a track on the list to play back. Audio source screen 2 Sets a repeat play for the current disc/the current track. Plays or does not play tracks in random order.
Video source CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. English Video source screen 1 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Performs fast reverse or fast forward. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Performs slow-motion playback.
Searches for the part you want to play. Touch [Title], [Chapter], [10key], or [Track] then input the desired number from [0] to [9]. To start playback from the number you registered, touch . Skips files/chapters forward or backward. Performs fast reverse or fast forward. * PBC (playback control) only Video source screen 2 Selects the audio output from [L+R], [Left], [Right], [Mix]. This function is available for Video-CDs and DVDs recorded with LPCM audio. Changes the viewing angle (Multi-angle).
Displays the DVD menu keypad. If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using these touch panel keys. Touch , , , or to select the menu item then touch . NOTE The way to display the menu differs depending on the disc. , you can operate the DVD menu directly. Resumes playback (Bookmark). This function is available for DVD-Video. You can memorize one point as a Bookmark for a disc (up to five discs).
Compressed files Inserting and ejecting media WARNING Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. CAUTION • Do not insert anything other than a disc into the disc-loading slot. • Do not insert anything other than SD memory cards into the SD card slot. • Ejecting an SD memory card during data transfer can damage the SD memory card.
2 3 4 Touch to open the LCD panel. Insert an SD memory card into the SD card slot. Press . Ejecting an SD memory card 1 2 3 4 5 Press . Touch to open the LCD panel. Press the middle of the SD memory card gently until it clicks. Pull the SD memory card out straight. Press . Plugging a USB storage device 1 2 Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable. NOTES • This product may not achieve optimum performance with some USB storage devices.
Unplugging a USB storage device 1 Pull out the USB storage device from the USB cable. Starting procedure For Disc 1 Insert the disc (page 49). TIP If the disc is already set, select [Disc] as the playing source. For USB/SD 1 Insert the SD memory card into the SD card slot or plug the USB storage device into the USB connector. 2 3 Press then touch . Touch [USB] or [SD]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files.
Audio source Audio source screen 1 (Example: USB) English Displays the link search screen. Touch the song to play back followed by touching the song information, after switching to Music Browse mode (page 53). TIP If you touch the artwork, the list of songs in the album is displayed. NOTE This function is available for the external storage device (USB, SD) only. Switches between playback and pause. Switches the following media file types.
Audio source screen 2 (Example: USB) English Selects the previous folder or the next folder. Sets a repeat play range for all files/the current folder/the current file. Plays files or does not play in random order. ▶Selecting a file using Music Browse mode You can select files to play back using the category list if the files contain tag information. NOTES • This function is available for the external storage device (USB, SD) only. • Music Browse mode cannot be held once the power is turned off.
TIP Once the database is created in the USB storage, there is no need to create the database again as long as the same contents are saved. To enter the Music Browse mode directly, touch and then touch [Tag] before selecting the song. Video source Video source screen (Example: USB) Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Switches the following media file types.
Sets a repeat play range for all files/the current folder/the current file. Switches the audio/subtitle language. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it. Skips files forward or backward. Performs fast reverse or fast forward. Still image source TIPS • Image files are not displayed in the rear display. • By pressing then touch and hold or on the still image file, you can search through 10 image files at a time.
Switches between playback and pause. Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [Photo]: Image files Selects the previous folder or the next folder. Rotates the displayed picture 90° clockwise. Sets a repeat play range for all files/the current folder. Plays all files in the current repeat play range or does not play them in random order. Selects a file from the list. Touch a file on the list to playback.
iPod Connecting your iPod NOTES • Depending on the generation or version of the iPod, some functions may not be available. • Do not delete the Apple Music® app from your iPod since some functions may not be available. • When connecting an iPhone or iPod touch, quit all applications before connecting the device. 1 2 3 Connect your iPod via USB. Press then touch . Touch [iPod]. NOTE For details on USB connection, refer to the Installation Manual.
Audio source Audio source screen 1 English Displays the link search screen. Select a song from the list related to the song currently playing. TIP If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music Radio. Switches between playback and pause. Skips files forward or backward. Selects a song from the list. Touch the category then the title of the list to playback of the selected list.
Audio source screen 2 English Changes the audiobook speed. Normal—Fast—Slow NOTE The audiobook speed icon may not change depending on the connected iPod/ iPhone. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly. Apple Music® Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.
Apple Music Radio screen English Switches between playback and pause. Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. • Touch [Add to iTunes Wish List] to add the current song to the iTunes® wish list. NOTE This function may not be used depending on your Apple Music account status. Skips tracks forward.
WebLink™ NOTES • The supported finger gestures may vary depending on the WebLink compatible application. • To use WebLink, you must first install the WebLink Host app on the iPhone or smartphone. For details about the WebLink Host app, visit the following site: https://www.abaltatech.com/weblink/ • Be sure to read Using app-based connected content (page 138) before you perform this operation. • Copyright protected files such as DRM cannot be played.
WebLink English Displays the main menu of the WebLink source screen. For iPhone users 1 2 3 4 5 Connect your iPhone to this product via USB. Refer to the Installation Manual. Press . Touch . Touch [WebLink]. Touch desired icon in the tab. The WebLink app is launched. For smartphone (Android) users NOTE The video playback capability depends on the connected Android device. 1 2 3 4 5 Unlock your smartphone and connect it to this product via USB. Refer to the Installation Manual. Press . Touch .
Using the audio mix function You can output the audio mixing AV source and an application for iPhone or smartphone when WebLink is used. NOTE Depending on the application or AV source, this function may not be available. Start up the WebLink. Press VOL (+/-). The audio mix menu will be displayed on the screen. Android iOS Touch to mute. Touch again to cancel mute. Sets whether to switch the sound mix function on or off.
Apple CarPlay™ You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTE The compatible finger gestures vary depending on the application for the iPhone. WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
3 4 Touch [Smartphone-related Settings]. English Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure When connecting an iPhone to this product, settings are required according to the connected device. For details, refer to Setup for iPod®/iPhone® or smartphone (page 38). Wired connection 1 2 3 4 5 Connect an Apple CarPlay compatible device to this product via USB. Press . Touch . Touch [Apple CarPlay].
The unit configures the connection then start the application. TIP You can also start Apple CarPlay with a desired device by opening the Bluetooth or Apple CarPlay setting menu while displaying the device search or device list screen. TIP You can use Siri function by pressing once Apple CarPlay is activated. Adjusting the volume You can adjust the guidance volume separately from the main sound volume when Apple CarPlay is used. 1 While Apple CarPlay is activated, press VOL (+/-).
Android Auto™ You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTE The compatible finger gestures vary depending on the application for the smartphone. WARNING Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
3 4 Touch [Smartphone-related Settings]. English Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure When connecting a smartphone to this product, settings are required according to the connected device. For details, refer to Setup for iPod®/iPhone® or smartphone (page 38). Wired connection 1 2 3 4 5 Connect an Android Auto™ compatible device to this product via USB. Press . Touch . Touch [Android Auto].
5 Touch a desired device on the screen. The unit configures the connection then start the application. TIP You can use voice recognition function by pressing once Android Auto is activated. Adjusting the volume You can adjust the guidance volume separately from the main sound volume when Android Auto is used. 1 While Android Auto is activated, press VOL (+/-). The volume menu will be displayed on the screen. Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume.
NOTE Android Auto will launch automatically only when an Android Auto compatible device is correctly connected to this product. Press Touch . then . Touch [Smartphone-related Settings]. Touch [Android Auto Auto-launch] to switch [On] or [Off].
Pandora® WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Important Create a free or a paid account online.
• For details on USB connection, refer to the Installation Manual. Basic operation Playback screen 1 English Recalls the preset station stored to a key from the memory. Stores the current station to a key. Displays the preset station list. Select an item on the list ([1] to [6]) to switch to the preset station. Switches between playback and pause. Skips tracks forward. TIP By pressing then touch , you can skip songs forward. * Gives a Thumbs Up to the playing track.
TIP Shared stations are indicated by * and . are not available when using a shared station. Playback screen 2 Creates a new station. Touch [Track] or [Artist] to create a new station. Adds information for the track currently playing to bookmarks. - 73 - English Selects a Pandora station from the list. • : Switches to the station list. • : Switches to the genre list. • : Plays only one track based on particular musical characteristics from several shuffled stations. • : Deletes the station.
SiriusXM® Satellite Radio Subscribing to the SiriusXM Satellite Radio service 1 2 3 4 Press then touch . Touch [SiriusXM]. You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly. Switch to Channel 0 and check the Radio ID. The SiriusXM Radio ID can be found by tuning in to Channel 0. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging.
• The activation process usually takes 10 to 15 minutes, but it may take up to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message. Listening to SiriusXM Press then touch . English 1 2 Touch [SiriusXM]. Basic operation TIPS • By pressing then touch or , you can move the preset channels up or down on the current channel screen, and skip files forward or backward on the play time indicator screen.
Displays the preset channels. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects a band. There are 4 bands. You can store 6 channels per band for a total of 24 presets. Performs TuneScan™ (page 77). NOTES • When fewer than two music channels are stored as presets, you cannot use TuneMix™. • Locked channels will not be used by TuneMix™ until the channels are unlocked by entering the parental control passcode.
Selects a channel from the list. Select the category name or the list of all channels then touch the desired channel. To switch the display list, touch . NOTES • The types of categories available depend on the types of channels available. • It may take time to display the channel list depending on the SiriusXM reception condition. Replay Mode (Time bar display) Switches between playback and pause. Performs content forward or backward. Performs fast forward or rewind.
• TuneScan™ may take a few minutes to become available after the product is turned on or the preset band is changed. • Tune Scan™ is compatible with SXV200 or later tuner models (sold separately). 1 Touch to display the following display. English Continues playing the current scanning song or channel. Skips to the previous/next song during TuneScan™ or to the previous/next channel during category scan. Cancels scan play and returns to the previous channel.
Using Featured Favorites Band How to access When there is a Featured Favorite, access it with the band key. 1 Touch the band key. SXM1—SXM2—SXM3—FF When there are multiple Featured Favorites, access them from the category list. It is displayed at the bottom of the category list (page 77). Parental lock The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content.
TIP To set the alert function, you can set up at [Alert List] (page 80) in the [SiriusXM Settings]. SiriusXM settings 3 4 Press . English 1 2 Touch then . The system setting screen appears. Touch [AV Source Settings]. Touch [SiriusXM Settings]. The menu items vary according to the source. Menu Item Description [Tune Start] [On] [Off] Start songs automatically from the beginning when you tune to one of your preset channels in the current preset band when TuneStart™ is turned on.
Menu Item Description [Featured Favorites] [On] [Off] Set to [On] to allow you to discover new channels created by the SiriusXM Programming department. NOTE If the Featured Favorite Band needs to update, the Featured Band Update message will appear. Set to [On] to be notified when the featured seasonal theme is updated. [SportsFlash] [On] [Off] Activates the SportsFlash™ function. • Touch [Play] to listen to the notified channel. • Touch [Ignore] to stay tuned to the current channel.
HDMI CAUTION NOTE A High Speed HDMI® Cable (sold separately) is required for connection. For details, refer to the Installation Manual. Starting procedure 1 2 Press then touch . Touch [HDMI]. The HDMI source screen appears. Basic operation HDMI source screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 117).
AUX You can display the video image output by the device connected to video input. NOTES • A Mini-jack AV cable (sold separately) is required for connection. For details, refer to the Installation Manual. • You can set the screen size for the video image (page 117). Starting procedure 1 2 3 4 5 6 Press Touch . then . Touch [Input/Output Settings]. Confirm that [AUX Input] is turned on. Press then touch . Touch [AUX]. The AUX screen appears.
Basic operation AUX screen English Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 117). Switches between the video input and audio input.
AV input You can display the video image output by the device connected or the camera to video input. For details, refer to the Installation Manual. Starting procedure 1 2 3 4 5 6 7 Press Touch . then . Touch [Input/Output Settings]. Touch [AV Input]. Touch [Source] for AV source or [Camera] for camera. Press then touch . Touch [AV] for AV source or [Camera View] for camera. The image is displayed on the screen.
Basic operation AV source screen English Hides the touch panel keys. To display the keys again, touch anywhere on the screen.
Wireless Mirroring Starting procedure Wireless Mirroring operations and procedures vary depending on the connected mobile device. Refer to the instruction manual that came with your mobile device. CAUTION For safety reasons, this function is available only when you stop your vehicle in a safe place and apply the parking brake. 1 2 3 4 5 6 7 8 Press Touch . then . Touch [Wi-Fi Settings]. Confirm that [Wi-Fi] is turned on. Press then touch . Touch [Mirroring].
Basic operation Wireless Mirroring screen (Example) English Displays Full screen. [Disconnect] Disconnects Wireless Mirroring. NOTES • The screen shown in the example may differ from the connected mobile device. • If the Android device is not ready for Miracast UIBC, you cannot perform touch operation.
iDatalink Using iDatalink NOTE Since the type of module varies depending on the vehicle model, search for your vehicle at the following URL to determine what features are available for each module. Remember to select the correct radio model for accurate results. http://maestro.idatalink.com/ Important • For details about vehicle models that are compatible with the iDatalink adapter, refer to the information on our website.
2 NOTE When the serial number input is required, input the device number of this product. Install the vehicle/head unit specific firmware on your iDatalink Maestro module. Connect this product to iDatalink Maestro, and then install this product to the vehicle. The iDatalink function will be active. NOTES • Device number input is required for updating the iDatalink Maestro module. Take a note of the device number as necessary. • For details on installing the firmware, refer to iDatalink Maestro website.
Displays the Gauge screen. Displays the Vehicle Information screen. Displays the Climate screen. Gauges screen Vehicle Information screen - 91 - English Displays the Parking Assist screen.
Climate screen English Parking Assist screen Displaying obstacle detection information CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgment, and care while parking your vehicle. NOTE This function is only available for vehicles equipped with a parking sensor system. iDatalink settings 1 2 3 Press Touch . then . Touch [OEM Settings] or [OEM Volume Settings].
Menu Item Description [OEM Settings] Setting for iDatalink function when the iDatalink adapter is connected to the unit. [OEM Volume Settings] Setting for iDatalink function volume when the iDatalink adapter is connected to the unit.
Settings You can adjust various settings in the main menu. 1 2 3 Press Touch . . Touch one of the following categories, then select the options. System settings (page 94) Theme settings (page 104) Audio settings (page 106) Video settings (page 112) Bluetooth settings (page 25) System settings The menu items vary according to the source.
Menu Item Description [Android Auto Autolaunch] [On] [Off] Select [On] to automatically launch Android Auto when an Android device is connected to the unit. Menu Item Description [Auto Mix (iPhone/iPod)] [On] [Off] Select whether to perform mixing the sound output from WebLink and AV source sound automatically. [Input/Output Settings] Menu Item Description [AV Input] [Source] [Camera] [Off] Select AV input source (page 85). [AUX Input] [On] [Off] Set to [On] for AUX source (page 83).
NOTES • To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On] (page 96). • When using the 2nd camera, set [AV Input] to [Camera] (page 85). • When the camera view of both the rear view camera and 2nd camera are available, the key to switch the display appears. Touch this key to switch the display between the rear view image and 2nd camera image. Menu Item Description [Camera View] [On] [Off] Set to [On] to display camera view at all times.
Menu Item Description [Parking Assist Guide Adjust] Adjusting the guidelines by dragging or touching / / / on the screen. Touch [Default] to reset the settings. / / CAUTION NOTES • Use painter's tape or similar tape to place markings as shown below before setting up the guidelines. • Adjust the guidelines so that they overlay the tape markings as closely as possible. 30 cm (1 ft) 25 cm (9-7/8 in.) Markings 1.52 m (5 ft) Markings 25 cm (9-7/8 in.) 6.
[Demo Mode] Menu Item Description [Demo Mode] [On] [Off] Setting the demo mode. English [System Language] Menu Item Description [System Language] Select the system language. NOTES • If the embedded language and the selected language setting are not the same, the text information may not display properly. • Some characters may not be displayed properly. [Restore Settings] Touch [Restore] to restore the settings to the default settings. CAUTION Do not turn off the engine while restoring the settings.
[Touch Panel Calibration] If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. Menu Item Description [Touch Panel Calibration] 1 Touch two corners of the screen along the arrows then touch the centers of the two [+] marks at the same time twice. 2 Press . The adjustment results are saved. 3 Press once again. Proceed to 16-point adjustment.
Menu Item [Night] [Dimmer Duration] Description Turns the dimmer function to on. Adjust the time that the dimmer is turned on or off by dragging the cursors or touching or . You can use this function when [Dimmer Trigger] is set to [Time]. NOTE The time display of the dimmer duration adjusting bar depends on the clock display setting (page 117). [Picture Adjustment] You can adjust the picture for each source and rear view camera.
Menu Item Description [Temperature] [-3] to [+3] Adjust the color temperature, resulting in a better white balance. * With some pictures, you cannot adjust [Hue] and [Color]. [System Information] Menu Item [Firmware Information] Description Displays the firmware version. TIP You can also check the open source license of the functions that this product is equipped with by touching [License] in this menu.
Menu Item [Firmware Update] Description CAUTION 1 Download the firmware update files into your computer. 2 Connect a blank (formatted) storage device to your computer then locate the correct update file and copy it onto the USB storage device. 3 Set the external storage device to this product (page 50). 4 Turn the source off (page 36). 5 Display the [System] setting screen (page 94). 6 Touch [System Information]. 7 Touch [Firmware Update]. 8 Touch [Continue].
Menu Item Description [Connection Status] Check that the leads are properly connected between this product and vehicle. [GPS Antenna] Displays the connection status of the GPS antenna ([OK] or [NOK]) and the reception sensitivity. [Positioning Status] Displays the positioning status (3D positioning, 2D positioning, or no positioning), the number of satellites used for positioning (orange), and the number of satellites that have received signals (yellow).
Theme settings CAUTION Do not turn off the engine while importing an image from the external storage device. The menu items vary according to the source. Description [Background] [Home] [AV] Select the wall paper from the preset items in this product or original pictures via the external device such as USB storage device and SD memory card. TIP The wall paper can be set from selections for the top menu screen and AV operation screen.
Menu Item Description [Theme] Select the theme color. TIP You can preview the top menu screen or the AV operation screen by touching [Home] or [AV] respectively. Select the style of the clock from the preset image. Preset Images Select the desired preset style for the clock. (off ) Hides the clock display. [Splash Screen] Select the splash screen from the preinstalled image in this product or external devices such as USB storage devices and SD memory cards.
5 6 Touch the item you want export. [Illumination] [Theme] [Splash Screen] [Select All] Touch [Export]. English ▶Importing Theme settings 1 2 Set the external storage device (page 49). A message confirming whether to import the stored setting data appears. Touch [Import]. Audio settings The menu items vary according to the source. Some of the menu items become unavailable when the volume is set to mute or the source is off.
Menu Item Description [Mute Level] Select mute or attenuate the AV source volume and iPhone or smartphone application volume when the navigation outputs the guidance voice. [ATT] The volume becomes 20 dB lower than the current volume. The volume becomes 0. [Off] The volume does not change. [Source Level Adjuster] [-4] to [+4] Adjust the volume level of each source to prevent radical changes in volume when switching between sources other than FM.
Menu Item Description [Crossover] Select a speaker unit (filter) to adjust the HPF or LPF cutoff frequency and the slope for each speaker unit (page 112). Select the subwoofer phase (page 112). [Listening Position]*1 [Off] [Front Left] [Front Right] [Front] [All] Select a listening position that you want to make as the center of sound effects.
Description [ASL] Set to one of five levels to increase the volume level of the audio depending on the driving speed and road conditions. [BASS Boost] [0] to [6] Adjust the bass boost level. [Rear Speaker Output] [Rear] [Subwoofer] Select the rear speaker output. [Loudness] [Off] [Low] [Mid] [High] Compensates for deficiencies in the low-frequency and high-frequency ranges at low volume.
WARNING A loud tone (noise) may be emitted from the speakers when measuring the vehicle’s acoustics. Never perform Auto EQ measurement while driving. CAUTION ▶Before operating the Auto EQ function • Perform Auto EQ in a quiet place with the vehicle engine and air conditioning switched off. Also, cut the power of car phones or cellular phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics.
NOTES • Auto EQ changes the audio settings as follows: – The fader/balance settings return to the center position (page 106). • Previous settings for Auto EQ will be overwritten. 1 NOTE If driving restrictions are detected during measurement, the measurement is canceled. 2 3 4 5 6 7 8 9 Fix the microphone for acoustical measurement (sold separately) in the center of the headrest of the driver’s seat, facing forward. The Auto EQ may differ depending on where you place the microphone.
NOTE The measurement time varies depending on the type of vehicle. TIP To stop the measurement, touch [Stop]. 14 Store the microphone carefully in the glove compartment or another safe place. Adjusting the cutoff frequency value You can adjust the cutoff frequency value of each speaker. The following speakers can be adjusted: [Standard Mode]: Front, Rear, Subwoofer. [Network Mode]: High, Mid, Subwoofer. NOTES • Subwoofer settings are available only when [Subwoofer] is [On].
Description [Subtitle Language]*1*2 Set a subtitle language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Audio Language]*1*2 Set an audio language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Menu Language]*1*2 Set a menu language preference. When you select [Others], a language code input screen is shown.
Description [Parental] Set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired. 1 Touch [0] to [9] to input a four-digit code number. 2 Touch . Registers the code number, and you can now set the level. 3 Touch any number between [1] to [8] to select the desired level. The lower the level is set, the tighter the restriction is applied. 4 Touch . Sets the parental lock level.
Menu Item Description [DVD Auto Play] [On] [Off] Set to display the DVD menu automatically and start playback from the first chapter of the first title when a DVD disc with a DVD menu is inserted. *1 You can switch the language by touching the switch languages key during playback. *2 The setting made here will not be affected even if the language is switched during playback using the appropriate key.
Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen. Creating a shortcut 1 2 Press then touch . Touch the star icon of the menu item. The star icon for the selected menu is filled in. TIP To cancel the registration, touch the star icon in the menu column again. Selecting a shortcut 1 2 3 Press then touch Touch . . Touch the menu item.
Other functions Setting the time and date Touch the current time on the screen. Touch or to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [12hour] or [24hour]. • You can change the order of date display format: Day-month, Month-day. Changing the wide screen mode You can set the screen mode for AV screen and image files. 1 Touch the screen display mode key.
[Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. NOTE [Trimming] is for image files only. NOTES • Image files can be set to either [Normal] or [Trimming] in wide screen mode. • This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
The video and sound of the SD memory cards are output to the rear display. [AV] NOTE Compatible file types are MPEG-4, H.264, WMV, MKV, and FLV only. The video and/or sound of the AV input source are output to the rear display. [Source OFF] NOTE The video image and sound are output only when [AV Input] is set to [Source] (page 85). Nothing is output to the rear display. Setting the anti-theft function You can set a password for this product.
8 9 Up to 40 characters can be entered for a hint. Touch [Go]. If you want to change the password currently set, enter the current password and then enter the new one. Check the password, and then touch [OK]. English Deleting the password The current password and password hint can be deleted. Press . 1 2 3 4 5 6 7 8 Touch then . Touch 1, followed by 2, and then touch 3 (page 119). Touch [Clear Password]. Touch [Yes]. Touch [OK]. Enter the current password. Touch [Go].
Appendix If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Common problems A black screen is displayed, and operation is not possible using the touch panel keys. → [Power OFF] mode is on. – Press any button on this product to release the mode.
The picture stops (pauses) and this product cannot be operated. → The reading of data is impossible during disc playback. – Stop playback once, then restart. The picture is stretched, with an incorrect aspect ratio. → The aspect setting is incorrect for the display. – Select the appropriate setting for that image. A parental lock message is displayed and DVD playback is not possible. → The parental lock is on. – Turn the parental lock off or change the level.
Black screen displayed when the vehicle is in reverse, with no camera installed. → Back camera input is set to On. – Turn the setting to Off in the settings menu. (Refer to the System Settings section of this manual to adjust.) Back image displayed when vehicle is not in reverse. → The camera polarity is not set properly in the Camera settings menu. – Review System Settings section of this manual for steps to switch the camera polarity.
occurs when the reverse gear polarity setting of this product is incorrect. – Check the polarity and re-select the correct setting. problem, contact your dealer or an authorized Pioneer Station for assistance. Pandora Error messages Common AMP Error → This product fails to operate or the speaker connection is incorrect; the protective circuit is activated. – Check the speaker connection.
– Access Pandora from within the licensing region. SiriusXM® Satellite Radio Check Antenna → The antenna connection is incorrect. – Check the antenna connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance. Check Tuner → The SiriusXM Connect Vehicle Tuner connection is incorrect. – Check the tuner connection and battery voltage.
– Press the RESET button. Song Unavailable → The alert memo function is not available. – Perform the operation with another channel. Different Region Disc → The disc does not have the same region number as this product. – Replace the DVD with one bearing the correct region number. Alert Memory Full You can manage alert memory in the alert list → The memory is full. – Clear the alert list. Memory Full → The memory has become full while playback was paused. – Resume playback.
Video frame rate not supported → DivX file’s frame rate is more than 30 fps. – Select a file that can be played. Audio Format not supported → This type of file is not supported on this product. – Select a file that can be played. External storage device (USB, SD) Error-02-9X/-DX → Communication failed. – Turn the ignition switch OFF and back ON. – Disconnect the USB storage device. – Change to a different source. Then, return to the USB storage device.
– Disconnect the device and replace it with another USB storage device. displayed, reconnect the iPod and reset it. Video resolution not supported → Files that cannot be played on this product are included in the file. – Select a file that can be played. Error-02-67 → The iPod firmware version is old. – Update the iPod version. Audio Format not supported → This type of file is not supported on this product. – Select a file that can be played.
Bluetooth pairing failed. Please pair your Android phone manually. → The Bluetooth pairing failed for some reasons. – Pair this product with the device manually. To use Android Auto, please stop your car and check your Android phone. → The default settings are displayed on the screen of the Android Auto compatible device or images are not output from the Android Auto compatible device. – Park your vehicle in a safe place, and follow the instructions displayed on the screen.
this product. Consider it to be normal wear and tear. Playable discs DVD-Video Dolby Digital • is a trademark of DVD Format/Logo Licensing Corporation. • It is not possible to play DVD Audio discs. This DVD drive may not be able to play all discs bearing the marks shown above. This product will down-mix Dolby Digital signals internally and the sound will be output in stereo. • Manufactured under license from Dolby Laboratories.
DVD-Video discs • DVD-Video discs that have incompatible region numbers cannot be played on this DVD drive. The region number of the player can be found on this product’s chassis. CD-R/CD-RW discs • Unfinalized discs cannot be played back. • It may not be possible to playback CD-R/ CD-RW discs recorded on a music CD recorder or a computer because of disc characteristics, scratches or dirt on the disc, or dirt, scratches or condensation on the lens of the built-in drive.
USB storage device • For details about USB storage device compatibility with this product, refer to Specifications (page 141). • Protocol: bulk • You cannot connect a USB storage device to this product via a USB hub. • Partitioned USB storage device is not compatible with this product. • Firmly secure the USB storage device when driving. Do not let the USB storage device fall onto the floor, where it may become jammed under the brake or gas pedal.
such as 0.1 seconds, the subtitles may not be displayed at the correct time. Media compatibility chart CD-R/-RW CODEC FORMAT FILE SYSTEM MAX. DIRECTORY MAX. FOLDER No. MAX. FILE No. MP3, WMA, AAC, DivX, MPEG1, MPEG2, MPEG4 ISO 9660 level 1, level 2, Romeo Joliet No limit 700 999 DVD-R/-R SL/-R DL/DVD-RW CODEC FORMAT FILE SYSTEM MAX. FOLDER No. MAX. FILE No. MP3, WMA, AAC, MPEG2, MPEG4 ISO 9660 level 1, level 2, Romeo Joliet 700 3 500 USB storage device/SD memory card CODEC FORMAT FILE SYSTEM MAX.
MP3 compatibility • Ver. 2.x of ID3 tag is prioritized when both Ver. 1.x and Ver. 2.x exist. • This product is not compatible with the following: MP3i (MP3 interactive), mp3 PRO, m3u playlist TRANSMISSION RATE ID3 TAG FLAC compatibility • FLAC files on the CD-R/-RW, DVD-R/-RW/R SL/-R DL cannot be played. 16 kHz to 48 kHz 8 kbps to 320 kbps, VBR USB: v1,v1.1,v2.2,v2. 3,v2.4 Disc: v1,v1.1,v2.2,v2.
• Only USB storage devices can play back VOB files. .avi Compatible video codec .mp4 Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, H.263 1 920 x 1 080 30 fps .3gp Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, H.263 1 920 x 1 080 30 fps Compatible video codec Maximum resolution Maximum frame rate WMV/VC-1 1 920 x 1 080 30 fps .wmv Compatible video codec Maximum resolution Maximum frame rate WMV/VC-1 1 920 x 1 080 30 fps .
• This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc. Wi-Fi FLAC HD Radio™ Technology HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio and the HD, HD Radio, and "ARC" logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Waze and Waze logo are registered trademarks of Google LLC. Google™, Google Play, Android Google, Google Play and Android are trademarks of Google LLC.
iPhone, iPod and Lightning® Apple CarPlay App Store App Store is a service mark of Apple Inc. iOS iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries. iTunes iTunes is a trademark of Apple Inc., registered in the U.S. and other countries. Apple Music Apple Music is a trademark of Apple Inc., registered in the U.S. and other countries. Apple CarPlay is a trademark of Apple Inc.
• Optional Pioneer adapter cable connecting your iPhone to this product. Pandora® Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Notice regarding MP3 file usage Liquid crystal display (LCD) screen Notice regarding open source licenses For details about the open source licenses for the functions that this product is equipped with, please visit http://www.oss-pioneer.com/car/ multimedia/ Using the LCD screen correctly Handling the LCD screen • When the LCD screen is subjected to direct sunlight for a long period of time, it will become very hot, resulting in possible damage to the LCD screen.
and then wipe the screen with a soft dry cloth. • When wiping the LCD screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners. A light emitting diode is used inside the display to illuminate the LCD screen. • At low temperatures, using the LED backlight may increase image lag and degrade the image quality because of the characteristics of the LCD screen. Image quality will improve with an increase in temperature.
Slope: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct, -30 dB/oct, -36 dB/oct, OFF Gain: +10 dB to -24 dB (1 dB/step) Phase: Normal/Reverse Time alignment: 0 to 140 step (1 inch/step) Bass boost: Gain: +12 dB to 0 dB (2 dB/step) Speaker level: +10 dB to -24 dB (1 dB/step) DVD drive System: DVD-V, VCD, CD, MP3, WMA, AAC, DivX, MPEG player Usable discs: DVD-VIDEO, VIDEO-CD, CD, CD-R, CDRW, DVD-R, DVD-RW, DVD-R DL Region number: 1 Frequency response: 5 Hz to 44 000 Hz (with DVD, at sampling frequency 96 kHz) S
MPEG4 part 2 (visual), MS-MPEG4 Ver. 3: .avi File system: FAT16, FAT32, NTFS MP3 decoding format: MPEG-1/Layer-1, MPEG-1/Layer-2, MPEG1/Layer-3 MPEG-2/Layer-1, MPEG-2/Layer-2, MPEG2/Layer-3 MPEG-2.5/Layer-3 WMA decoding format: WMA 10 Std, WMA 10 Pro, WMA 9 Lossless AAC decoding format: MPEG-2 AAC-LC, MPEG-4 AAC-LC FLAC signal format: Ver. 1.3.0 WAV signal format: Linear PCM JPEG decoding format: JPEG H.
80 dB (digital broadcasting) (IHF-A network) 72 dB (analog broadcasting) (IHF-A network) Wi-Fi Frequency channel: 1, 6, 11 ch (2.4 GHz) 149, 151, 155 ch (5 GHz) Security: WPA 2 (personal) Output power: +16 dBm Max (2.4 GHz) +13 dBm Max (5 GHz) GPS GNSS receiver System: GPS L1C/Ac, SBAS L1C/A, GLONASS L1OF SPS (Standard Positioning Service) Reception system: 72 channel Multi-channel reception system Reception frequency: 1 575.42 MHz/1 602 MHz Sensitivity: -140 dBm (typ) Frequency: Approx.
© 2019 PIONEER CORPORATION. All rights reserved.
