Operation Manual

1 Display the system menu.
Refer to Introduction of menu operations on
page 46.
2 Touch Camera Polarity on the system
menu to select the appropriate setting.
! Battery – When the polarity of the con-
nected lead is positive while the shift lever
is in REVERSE (R) position
! Ground – When the polarity of the con-
nected lead is negative while the shift lever
is in REVERSE (R) position
! Off – When a rear view camera is not con-
nected to this unit
Note
You can also switch the rear view image by press-
ing the touch key, regardless of the
Camera Polarity setting on the system menu.
Refer to Basic operations on page 10.
Selecting the video format
You can switch the video output format of V
OUT between NTSC and PAL.
1 Display the system menu.
Refer to Introduction of menu operations on
page 46.
2 Touch Video Output Format on the sys-
tem menu to select the video output for-
mat.
NTSC—PAL
Note
You can switch the video output format only for
the source from this unit.
Setting the video signal
When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
! As this function is initially set to Auto, the
unit will automatically adjust the video sig-
nal setting.
! You can operate this function only for the
video signal input into the AV input.
1 Display the system menu.
Refer to Introduction of menu operations on
page 46.
2 Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting items are displayed.
! AV – Adjusts the AV video signal
! AUX – Adjusts the AUX video signal
! Camera – Adjusts the rear view camera
video signal
3 Touch c or d to select the desired
video signal appears.
Auto—PAL—NTSC—PAL-M—PAL-N—
SECAM
Setting the Artwork Dance
When a song is played by MIXTRAX, the art-
work display can be moved based on the
music type.
1 Display the system menu.
Refer to Introduction of menu operations on
page 46.
2 Touch Artwork Dance setting on the
system menu to turn On or Off.
Selecting the area group
1 Select the TV source.
Refer to Basic operations on page 10.
2 Display the system menu.
Refer to Introduction of menu operations on
page 46.
3 Touch TV Country Group on the func-
tion menu.
4 Touch c or d until the desired area
group appears.
Country1 (CCIR channel)—Country2 (Italy
channel)—Country3 (U.K. channel)—
Country4 (OIRT channel)
En
68
Section
13
Menu operations