Installation Manual

English
Español
Deutsch
Français
Italiano
Nederlands
PyÒÒÍËÈ
12
Fig. 6
Hide-away unit (supplied)
15 cm
(5-7/8 in.)
8 m
(26 ft. 3 in.)
CAUTION
Fuse resistor
Extension lead (supplied)
Rear view camera
RCA cable
(sold separately)
To video output
Pioneer recommends the use of
a camera which outputs mirror
reversed images, otherwise
screen image may appear
reversed.
Violet/white
Of the two lead wires connected to the
back lamp, connect the one in which the
voltage changes when the gear shift is in
the REVERSE (R) position.
Connection method
1.Clamp the lead. 2.Clamp firmly with
needle-nosed pliers.
Note:
• It is necessary to set to BACK UP CAMERA IN in SETUP
when connecting the rear view camera.
See the section
“Connecting the power cord (2)”.