Owner's Manual

TV tuner
Important
This manual describes analog TV tuner operation.
If you are already using a Pioneer analog TV
tuner, such as the GEX-P5700TV, read this section.
However, please read the important information
below.
! Pioneer stopped selling analog TV tuners in
the U.S. in 2006, and analog TV tuners are
also no longer available in Canadian markets.
Pioneer does not sell a digital TV tuner in the
U.S. or in Canada.
! In the U.S., the switch from analog TV to digi-
tal TV broadcasting is planned for February 17,
2009.
! In Canada, the switch from analog TV to digi-
tal TV broadcasting is planned for August 31,
2011.
! THIS MEANS THAT AFTER THE DATES SPECI-
FIED ABOVE (SUBJECT TO CHANGE), YOU
CAN NO LONGER USE THIS UNIT WITH AN
ANALOG TV TUNER TO WATCH ALMOST ALL
TV PROGRAMMING BROADCAST OVER-THE-
AIR.
Basic Operations
2
2
2
1
1
1
3
3
3
4
4
4
You can use this unit to control a TV tuner (e.g.
GEX-P5700TV), which is sold separately.
For details concerning operation, refer to the
TV tuner’s operation manual. This section pro-
vides information on TV operations with this
unit, which differs from that described in the
TV tuner’s operation manual.
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the TV tuner is tuned to.
3 Preset number indicator
Shows which preset has been selected.
4 Channel indicator
Shows which channel the TV tuner is tuned.
1 Touch the source icon and then touch
TV to select the TV.
# When the source icon is not displayed, you
can display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
3 Touch Band to select a band.
Touch Band repeatedly until the desired band
is displayed, TV1 or TV2.
4 To perform manual tuning, briefly
touch c or d.
# You can also perform manual tuning by press-
ing c or d (TRK).
Available accessories
En
81
Section
19
Available accessories