Owner's Manual

SIRIUS Satellite Radio tuner
Listening to SIRIUS Satellite Radio
2
2
2
1
1
1
4
4
4
5
5
5
6
3
3
3
You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
! This unit does not have the text scroll
function.
! With this unit, you can operate one addi-
tional function: SIRIUS channel direct se-
lection. Refer to Selecting a SIRIUS channel
directly on the next page.
1 Source icon
Shows which source has been selected.
2 SIRIUS band indicator
Shows which band the tuner is tuned to.
3 SIRIUS channel select setting indicator
Shows what channel select setting has
been selected.
4 SIRIUS preset number indicator
Shows which preset has been selected.
5 SIRIUS channel number indicator
Shows which channel has been selected.
6 Detail information
Shows the detail information of the broad-
cast channel currently being received.
1 Touch the source icon and then touch
SIRIUS to select SIRIUS.
2 Touch Band to select a band.
Touch Band repeatedly until the desired SIR-
IUS band is displayed, SIRIUS1, SIRIUS2 or
SIRIUS3.
3 Touch c or d to select a desired
channel.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you touch and hold c or d, you can in-
crease or decrease the channel number con-
tinuously.
# You can also select a channel by pressing c
or d (TRK).
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on the next page.)
# It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal.
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
! Channels are stored and recalled on a
broadcast station basis. This means that if
the broadcast station you stored has been
assigned to a different channel by SIRIUS,
you can still recall the same broadcast sta-
tion (though a different channel number
may appear in the display).
1 Touch List to display the preset list.
2 When you find a station that you want
to store in memory keep touching one of
preset tuning keys P1 to P6 until the beep
sounds.
The selected station has been stored in mem-
or y.
The next time you touch the same preset tun-
ing key P1 to P6 the station is recalled from
memory.
# When P1 to P6 are not displayed, you can dis-
play them by touching List.
Available accessories
En
66
Section
19