DVD RDS AV RECEIVER AVH-P3100DVD Operation Manual English
Contents Thank you for purchasing this PIONEER product. Please read through this manual before using the product for the first time, to ensure proper use. After reading, please keep the manual in a safe and accessible place for future reference.
Contents Selecting audio output 30 Playing CDs Listening to a CD 31 Selecting tracks from the track title list 31 Pausing playback 31 Switching the media file type 32 Using advanced sound retriever 32 Introduction of advanced CD operation 32 Repeating play 32 Playing tracks in random order 32 Scanning tracks of a CD 32 Playing compressed audio Listening to compressed audio 33 Selecting files from the file name list 34 Pausing playback 34 Switching the media file type 34 Using advanced sound retriever 34 In
Contents Setting the subtitle language 50 Setting the audio language 50 Setting the menu language 51 Setting the angle icon display 51 Setting the aspect ratio 51 Setting the slide show interval 51 Setting the parental lock 52 Setting the DivX subtitle file 52 Displaying your DivX® VOD registration code 53 Setting for digital output 53 Initial Settings Adjusting initial settings 54 Switching the auxiliary setting 54 Setting the rear output and subwoofer controller 54 Setting the FM tuning step 55 Switching
Section Precautions Please read all of these instructions regarding your display and retain them for future reference. 1 Read this manual fully and carefully before operating your display. 2 Keep this manual handy as a reference for operating procedures and safety information. 3 Pay close attention to all warnings in this manual and follow the instructions carefully. 4 Do not allow other persons to use this system until they have read and understood the operating instructions.
Section 01 Precautions To watch a DVD, Video CD or TV on the front display, park your vehicle in a safe place and apply the parking brake. When using a display connected to V OUT This unit’s V OUT is for connection of a display to enable passengers in the rear seats to watch the DVD or TV. WARNING NEVER install the rear display in a location that enables the driver to watch the DVD or TV while driving.
Section Before You Start 02 ! If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
Section 02 Before You Start http://www.pioneer.co.uk ! Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. ! We offer the latest information about Pioneer Corporation on our website. 2 standard, UDF 1.02) and USB storage device (FAT 16, FAT 32). In case of trouble DivX® video compatibility Refer to DivX compatibility on page 98.
Section Before You Start About DivX When an operation is prohibited When you are watching a DVD and attempt to perform an operation, it may not be performed because of the programming on the disc. When this happens, the icon appears on the screen. ! The icon may not appear with certain discs. 2 Press RESET with a pen tip or other pointed instrument. Before You Start DivX is a compressed digital video format created by the DivX® video codec from DivX, Inc.
Section 03 What’s what Head unit 1 c/d (TRK) buttons Press to do manual seek tuning, fast forward, reverse and track search controls. 2 +/– (VOL) buttons Press to increase or decrease the volume. 3 RESET button Press to return to the factory settings (initial settings). 4 h (eject) button Press to eject a disc from this unit. 5 Disc loading slot Insert a disc to play. 6 DISP OFF button Press to turn the information display on or off. 7 USB port Use to connect a USB storage device.
Section Basic Operations Power ON/OFF 1 Turning the unit on % When using the touch panel keys, touch the source icon and then touch the desired source name. The source names are displayed and selectable ones are highlighted. % When using the button, press SRC/OFF to turn the unit on. Turning the unit off % When using the touch panel keys, touch the source icon and then touch Off. # When the source icon is not displayed, you can display it by touching the screen.
Section 04 Basic Operations ! RearView (rear view camera) cannot be selected by pressing SRC/OFF. ! Image from rear view camera can be displayed automatically when the appropriate setting is conducted. For details, refer to Setting for rear view camera (back up camera) on page 60. ! External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. Two external units can be controlled with this unit.
Section Basic Operations 04 # When AV Menu is not displayed, you can display it by touching the screen. Operating the menu 2 Touch the desired key to display the function names you want to operate. Operating the scroll bar and the scrubber bar 1 Basic Operations 3 Touch ESC to return to the display of each source. 1 Function Menu key Touch to switch to the functions for each source. 2 Audio Menu key Touch to switch to the sound quality control menu.
Section 04 Basic Operations Scroll bar operation % If you see the scroll bar on the left side of the screen, drag upward or downward to view the hidden object. # Touching object. or can also display the hidden Scrubber bar operation This operation is available for the following sources: ! DVD-video, DVD-VR ! Video CD ! CD ! Compressed audio files (disc/USB) ! DivX % Drag the scrubber bar on the screen to specify the playback point. # Drag operation is not available when the scrubber bar is grayout.
Section Basic Operations Skips to the start of the current track, chapter or file, then to previous tracks/chapters/files. ! Performs fast reverse by touching and holding o. p Skips to the next track, chapter or file. ! Performs fast forward by touching and holding p. Basic Operations o 04 Note You may find with some DVD or Video CD discs that some playback controls do not work in certain parts of the disc. This is not a malfunction.
Section 05 Radio 4 Program service name Shows the name of broadcast program (program service name). Listening to the radio 1 2 3 4 5 NEWS indicator Appears when the set news program is received. 6 TRFC indicator Appears when a TP station is tuned in. 8 7 7 Text indicator Shows when the radio text is received. 65 RDS 1 2 3 9 8 5 (stereo) indicator Appears when the selected frequency is being broadcast in stereo. 9 Frequency indicator Shows the frequency to which the tuner is tuned.
Section Radio Notes Storing and recalling broadcast frequencies You can easily store up to six broadcast frequencies for later recall. ! Six stations for each band can be stored in memory. 1 Touch List to display the preset list. 2 When you find a frequency that you want to store in memory keep touching one of preset tuning keys P1 to P6 until the beep sounds. The selected radio station frequency has been stored in memory.
Section 05 Radio Introduction of advanced tuner operation 1 Touch AV Menu and then touch Function Menu to display the function names. The function names are displayed and operable ones are highlighted. 2 Touch ESC to return to the frequency display. # To return to the previous display, touch Back. Storing the strongest broadcast frequencies BSM (best stations memory) automatically stores the six strongest broadcast frequencies in the order of their signal strength.
Section Radio Using Auto PI Seek for preset stations When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall. ! The default setting for Auto PI Seek is off. Refer to Switching Auto PI Seek on page 55. When AF is used, the regional function limits the selection of stations broadcasting regional programs. % Touch Regional on the function menu to turn the regional function on.
Section Radio 05 Using PTY functions Receiving PTY alarm broadcasts You can tune in a station by using PTY (program type) information. When the emergency PTY code broadcasts, the unit receives it automatically (ALARM appears). When the broadcasting ends, the system returns to the previous source. Searching for an RDS station by PTY information You can search for general types of broadcasting programs, such as those listed in the following section. Refer to this page.
Section Radio Others 05 Educational programs Radio plays and serials Culture National or regional culture Science Nature, science and technology Varied Light entertainment Children Children’s Social Social affairs Religion Religious affairs or services Phone In Phone in Touring Travel programs; not for traffic announcements Leisure Hobbies and recreational activities Document Documentaries Radio Educate Drama En 21
Section 06 Playing DVD discs 5 Audio language indicator Shows which audio language has been selected. For DVD-VR, only the number of the audio language is displayed. Watching a DVD 1 2 3 4 6 Digital format indicator Shows when a signal encoded in the corresponding format is detected. 5 67 8 9 DVD video 1 2 3 7 Channel/sampling frequency/quantization bits Depending on the file format, some information may not be displayed.
Section Playing DVD discs 4 To perform fast forward or reverse, keep touching o or p. If you keep touching o or p for five seconds, the icon m or n is highlighted. When this happens, fast reverse/fast forward continues even if you release o or p. To resume playback at a desired point, touch f. Selecting titles from the title list Title list lets you see the list of titles on a disc and select one of them to play back. ! This function is available for DVD-VR. 1 Touch List. 2 Touch your favorite title.
Section 06 Playing DVD discs 3 Touch . Playback starts from the selected menu item. # The way to display the menu differs depending on the disc. This function skips a reproduced image for a specified time. If the currently playing disc contains commercials, it is possible to skip them. Selecting the play mode % To skip progressively backward or forward, touch or . Each time you touch or it changes steps in the following order: CM back 5 sec.—15 sec.—30 sec.—1.0 min.—2.0 min.—3.0 min.—0 sec.
Section Playing DVD discs Notes 06 Note ! There is no sound during slow motion playback. ! With some discs, images may be unclear during slow motion playback. ! Reverse slow motion playback is not possible. With discs featuring a menu, you can also touch Menu or Top Menu and then make selections from the displayed menu. Pausing playback DVDs can provide audio playback with different languages and different systems (Dolby Digital, DTS etc.).
Section 06 Playing DVD discs Changing the subtitle language during playback (Multi-subtitle) With DVDs featuring multi-subtitle recordings, you can switch between subtitle languages during playback. % Touch Subtitle during playback. Each time you touch Subtitle it switches between subtitle languages. Return to the specified scene You can return to the specified scene where the DVD you are currently playing has been preprogrammed to return. ! This function is available for DVD video.
Section Playing DVD discs 06 Repeating play There are three repeat play ranges for DVD playback. % Touch Repeat on the function menu to select the repeat range. Playing DVD discs ! Disc – Play through the current disc ! Chapter – Repeat the current chapter ! Title – Repeat the current title # If you perform chapter search or fast forward/ reverse, the repeat play range changes to Disc. Selecting audio output When playing DVD video discs recorded with LPCM audio, you can switch the audio output.
Section 07 Playing Video CDs Watching a Video CD 1 2 3 These are the basic steps necessary to play a Video CD with your DVD player. More advanced Video CD operation is explained starting in the following section. Refer to the next page. 1 Source icon Shows which source has been selected. 2 Track number indicator Shows the number of the track playing. 3 Play time indicator Shows the elapsed playing time of the current track. 1 Touch the source icon and then touch Disc to select the DVD player.
Section Playing Video CDs ! During playback of Video CDs featuring PBC (Playback Control), PBC ON, search and time search functions cannot be used nor can you select the range for repeat play. Frame-by-frame playback This lets you move ahead one frame at a time during playback.
Section 07 Playing Video CDs Repeating play There are two repeat play ranges for the Video CD playback: Track (track repeat) and Disc (disc repeat). ! During playback of Video CDs featuring PBC (playback control), this function cannot be operated. % Touch Repeat on the function menu to select the repeat range. ! Disc – Repeat the current disc ! Track – Repeat the current track # If you perform track search or fast forward/reverse, the repeat play range changes to Disc.
Section Playing CDs 08 Listening to a CD 1 2 3 4 5 6 7 1 Source icon Shows which source has been selected. 2 Track number indicator Shows the number of the track playing. 3 Play time indicator Shows the elapsed playing time of the current track. 4 Disc title indicator Shows the title of the currently playing disc only when playing CD TEXT discs. 5 Disc artist name indicator Shows the artist name of the currently playing disc only when playing CD TEXT disc.
Section 08 Playing CDs Switching the media file type Repeating play If a disc contains a mixture of various media file types such as DivX and MP3, you can switch between media file types to play. Refer to Switching the media file type on page 15. There are two repeat play ranges for the CD playback: Track (track repeat) and Disc (disc repeat). % Touch Media to switch between media file types.
Section Playing compressed audio Listening to compressed audio 1 2 3 4 5 6 7 8 9 09 9 Folder name indicator Shows the name of the currently playing folder. 1 Touch the source icon and then touch Disc to select the DVD player. # Touch Hide to hide the touch panel keys. # If no disc is loaded in the unit, you cannot select Disc (DVD player). Insert a disc in the unit. (Refer to page 14.) 2 These are the basic steps necessary to play a compressed audio with your DVD player.
Section Playing compressed audio 09 ! If the characters recorded on the disc are not compatible with this unit, those characters will not be displayed. ! Text information may not be correctly displayed depending on the recorded environment. Selecting files from the file name list File name list lets you see the list of file names (or folder names) and select one of them to playback. 1 Touch List. 2 Touch your favorite file name (or folder name). That selection will begin to play.
Section Playing compressed audio Repeating play For compressed audio playback, there are three repeat play ranges: Folder (folder repeat), File (one-track repeat) and Disc (repeat all tracks). % Touch Repeat on the function menu to select the repeat range. 1 Touch Scan on the function menu to turn scan play on. The first 10 seconds of each track of the current folder (or the first track of each folder) is played. 2 When you find the desired track (or folder) touch Scan again.
Section 10 Playing DivX/JPEG files Watching a DivX/JPEG 1 2 3 4 5 These are the basic steps necessary to play a DivX/JPEG with your DVD player. More advanced DivX/JPEG operation is explained starting in the following section. Refer to page 39. 1 Source icon Shows which source has been selected. 2 Folder number indicator Shows the folder number currently playing. 3 File number indicator Shows the file number currently playing. 4 Play time indicator Shows the elapsed playing time of the current file.
Section Playing DivX/JPEG files Viewing a JPEG slideshow When loading a CD/CD-R/RW containing JPEG picture files, this unit automatically starts a slideshow from the first folder/picture on the disc. The player displays the pictures in each folder in alphabetical order. The table below shows the controls for viewing a slideshow. Key What it does f Starts the slideshow, pauses the slideshow or restarts a paused disc. o Displays the previous picture. p Displays the next picture.
Section Playing DivX/JPEG files 10 Displaying text information on DivX/JPEG disc Text information recorded on a DivX/JPEG disc can be displayed. % Touch INFO. Touch INFO repeatedly to switch between the following settings: Folder Name (folder name)—File Name (file name) # If the characters recorded on the disc are not compatible with this unit, those characters will not be displayed. Pausing playback % Touch f during playback.
Section Playing DivX/JPEG files ! This unit can store only one image data. Old image is overwitten with new one. 1 Touch f to pause the slideshow when the desired image is displayed. 2 Touch Capture. Captureing the image is displayed. 3 When Do you save this image? is displayed, touch Yes. While storing the image to this unit, Saving the image Don't switch off the battery. is displayed. After stored completely, Image saved is displayed. # To cancel the strorage process, touch No.
Section Playing songs in a USB storage device 11 Basic Operations 1 2 3 4 current file. Touching it again will skip to the previous file. # You can also skip back or forward to another file by pressing c or d (TRK). 4 To perform fast forward or reverse, keep touching o or p. # You can also perform fast reverse/fast forward by pressing and holding c or d (TRK). Notes 5 For details about the supported device, refer to Portable audio player compatibility on page 8.
Section Playing songs in a USB storage device 11 Pausing compressed audio playback Introduction to advanced operations % Touch f during playback. 1 Touch AV Menu and then touch Function Menu to display the function names. The function names are displayed and operable ones are highlighted. # To resume playback at the same point that you turned pause on, touch f again. Switching the media file type The operation is the same as that of the builtin DVD player.
Section 12 Using iPod # Touch Hide to hide the touch panel keys. # Before connecting the dock connector of this unit to the iPod, disconnect the headphones from the iPod. # Depending on the model of iPod or the data size in the iPod, there may be a delay to start playing after connection. # After the iPod has been connected to this unit, use touch panel keys to select the iPod. # When removing the iPod from this unit, this unit is turned off.
Section Using iPod 12 ! If the characters recorded on the iPod are not compatible with this unit, those characters are not displayed. ! This unit can display the album art. While loading the album art information from iPod, functions may not work properly. — List operation may not function promptly. — Time display and actual time may not match. If many songs and album art have been stored in iPod, loading may take long time.
Section 12 Using iPod Searching by alphabet in the list 1 Select a category. (Refer to Searching songs/videos by category on the previous page.) 2 When a list for the selected category is displayed, touch ABC to switch to alphabet search mode. Alphabet search mode is displayed. 3 Touch c or d to select the first letter you are looking for. 4 Touch to show entries starting with the letter you chose. While searching, Searching flashes. In this condition, touch panel key operation is not available.
Section Using iPod Playing songs/videos in a random order (shuffle) For playback of songs/videos on the iPod, there are two random play methods: Songs (play back songs/videos in a random order) and Albums (play back albums in a random order). % Touch method. to select the random play ! Songs – Play back songs/videos in the selected list in random order. ! Albums – Play back songs/videos from a randomly selected album in order.
Section 12 Using iPod % Touch AudioBooks to select your favorite setting. ! Faster – Playback faster than normal speed ! Normal – Playback in normal speed ! Slower – Playback slower than normal speed Changing the screen mode While video is playing, you can select the display mode between widescreen (16:9) and standard (4:3) screen. % Touch Wide Screen. # To switch to standard (4:3) screen, touch Wide Screen again.
Section Audio Adjustments 2 Touch a or b to adjust front/rear speaker balance. Front:15 to Rear:15 is displayed as the front/ rear speaker balance moves from front to rear. # FR: 0/LR: 0 is the proper setting when only two speakers are used. # When the rear output setting is Subwoofer, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 54. 1 Audio display Shows the audio adjustment status.
Section Audio Adjustments 13 Custom Custom Flat Flat Super Bass Super bass # Custom is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve setting is memorized in Custom. # When Flat is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve. 3 Touch c or d on Band to select the equalizer band to adjust.
Section Audio Adjustments When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Touch High Pass Filter on the audio function menu. 2 Touch d next to High Pass Filter to turn high pass filter on. Notes ! The MW/LW volume level can also be adjusted with source level adjustments.
Section 14 Setting up the DVD player Introduction of DVD setup adjustments 1 1 DVD setup menu display Shows the DVD setup menu names. You can use this menu to change audio, subtitle, parental lock and other DVD settings. 1 Touch g. Setup will be displayed instead of Menu. 2 Touch Setup. The DVD setup function names are displayed. 3 Touch ESC to return to the playback display. # To return to the previous display, touch Back.
Section Setting up the DVD player 14 of 4:3. Be sure to select the correct TV aspect for the display connected to V OUT. ! When using a regular display, select either Letter Box or Pan Scan. Selecting 16 : 9 may result in an unnatural picture. ! If you select the TV aspect, the unit’s display changes to the same setting. Setting the menu language % Touch TV Aspect on the DVD setup menu to select the TV aspect. Touch TV Aspect repeatedly until the desired TV aspect appears in the display.
Section Setting up the DVD player 14 ! Manual – JPEG images can be switched manually Setting the parental lock Some DVD video discs let you use parental lock to restrict children from viewing violent and adult-oriented scenes. You can set the parental lock to your desired level. ! When you set a parental lock level and then play a disc featuring parental lock, code number input indications may be displayed. In this case, playback will begin when the correct code number is input.
Section Setting up the DVD player ! Custom – Display the DivX external subtitles ! Up to 42 characters can be displayed on one line. If more than 42 characters are set, the line breaks and the characters are displayed on the next line. ! Up to 126 characters can be displayed on one screen. If more than 126 characters are set, the excess characters will not be displayed. % Touch Digital Output on the DVD setup menu to select the desired digital output setting.
Section 15 Initial Settings Adjusting initial settings Switching the auxiliary 1 setting % Touch AUX1 on the initial menu to select desired setting. ! Video – auxiliary video device connected with 4-pole mini plug cable (e.g., CDV150M) ! Audio – auxiliary device connected with stereo mini plug cable ! iPod – an iPod with video capabilities connected with CD-IU50V ! Off – No auxiliary device is connected 1 1 Function display Shows the function names.
Section Initial Settings # When no subwoofer is connected to the rear output, select Full (full-range speaker). # When a subwoofer is connected to the rear output, select Subwoofer (subwoofer). # When the rear output setting is Subwoofer, you cannot operate the following procedure. 3 Touch c or d next to Preout to switch the subwoofer output or rear output. Touching c or d will switch between Subwoofer and Rear and that status will be displayed.
Section 15 Initial Settings Switching the sound muting/attenuation Sound from this system is muted or attenuated automatically when the signal from the equipment with mute function is received. ! Sound from this system returns to normal when the muting or attenuation is canceled. % Touch TEL on the initial menu to select the setting. Touch TEL until the desired setting appears in the display.
Section Initial Settings 15 % Touch Digital ATT on the initial menu to switch the digital attenuator setting. Touch Digital ATT repeatedly until the desired setting appears in the display. Initial Settings ! High – High quality sound ! Low – Minimize distortion sound Auto TA and EQ (auto-time alignment and autoequalizing) The auto-time alignment is automatically adjusted for the distance between each speaker and the listening position.
Section System settings 16 Introduction of system adjustments without sensing any disparity even on a wide screen. Cinema (cinema) The picture is enlarged by the same proportion as Full or Zoom in the horizontal direction and by an intermediate proportion between Full and Zoom in the vertical direction; ideal for a cinemasized picture (wide screen picture) where captions lie outside. 1 1 System menu display Shows the system function names.
Section System settings 16 Changing the picture adjustment is displayed as the level is increased or decreased. You can adjust the Brightness (brightness), Contrast (contrast), Color (color) ,Hue (hue), Dimmer (dimmer), Temperature (temperature) and Black Level (black level) for each source and rear view camera. ! You cannot adjust Color, Hue, Contrast and Black Level for the audio source. Adjusting the dimmer 2 Touch any of the following touch panel keys to select the function to be adjusted.
Section System settings 16 Setting the clock Use these instructions to set the clock. 1 Touch Clock Adjustment on the system menu. 2 Touch On/Off to turn the clock display on. # To turn the clock display off, touch On/Off again. 3 Touch c or d to select the segment of the clock display you wish to set. Each time you touch c or d it will select one segment of the clock display: Hour—Minute As you select segments of the clock display the segment selected will be highlighted.
Section Entertainment settings Introduction of entertainment settings 1 Entertainment menu display Shows the entertainment function names. 1 Touch AV Menu and then touch Entertainment Menu to display the entertainment function names. The entertainment function names are displayed and operable ones are highlighted. 2 Touch ESC to return to the display of each source. # To return to the previous display, touch Back.
Section Entertainment settings 17 2 Touch Custom to display the customizing menu. 3 Press +/– (VOL) to customize the color. 4 To store the customized color in memory, touch and hold one of preset keys (Memo1, Memo2 or Memo3) until the beep sounds. The customized color has been stored in memory. The next time you touch the same preset key, the color is recalled from memory. Selecting the OSD color You can change the OSD color. 1 Touch Screen Color on the entertainment menu.
Section Other Functions Adjusting the response positions of the touch panels (Touch Panel Calibration) 1 Touch the source icon and then touch Off to turn this unit off. # When the source icon is not displayed, you can display it by touching the screen. 2 Press and hold h (eject). The 4-point touch panel adjustment screen appears. 3 Touch each of the arrows on the four corners of the screen with the touch panel adjustment pen. # To cancel the adjustment, press and hold MUTE.
Section 18 Other Functions % Insert the stereo mini plug into the AUX input jack on this unit. For more details, refer to What’s what on page 10. 3 Touch a or b to select a letter of the alphabet. IP-BUS-RCA interconnector (AUX-2) 4 When connecting auxiliary device using an IPBUS-RCA Interconnector (sold separately) 5 Touch OK to store the entered title in memory.
Section Other Functions 18 % Keep touching Band. % Touch c or d. % Keep touching c or d. % Touch a or b. Using the functions allocated to 1 to 6 keys Touch NEXT. 2 Touch any of 1 to 6 to select a function. Other Functions 1 Advanced operations 1 Touch AV Menu and then touch Function Menu to display the function names. The function names are displayed and operable ones are highlighted.
Section 19 Available accessories Bluetooth Audio Basic Operations 1 2 3 ! If you connect a Bluetooth adapter (e.g. CDBTB200) to this unit, you can control Bluetooth audio players via Bluetooth wireless technology. ! In some countries, CD-BTB200 is not sold on the market.
Section Available accessories 19 2 Touch d. Playback starts. 3 To skip back or forward to another track, briefly touch o or p. # You can also skip back or forward to another track by pressing c or d (TRK). 4 To perform fast forward or reverse, keep touching o or p. Note Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompanying documentation.
Section 19 Available accessories Bluetooth Telephone Basic Operations 1 2 3 4 5 6 98 7 ! If you use a Bluetooth adapter (e.g. CDBTB200), you can connect a cellular phone featuring Bluetooth wireless technology to this unit for hands-free, wireless calls, even while driving. ! In some countries, CD-BTB200 is not sold on the market.
Section Available accessories ! This unit does not have the name edit function of a Phone Book entry. % Touch the source icon and then touch TEL to select the telephone. Note proper level. If the volume is muted (zero level) on your cellular phone, the volume level of your cellular phone remains muted even after the cellular phone is disconnected. Making a phone call Voice recognition 1 Touch to turn the voice recognition function on. Voice dial icon appears on the information bar.
Section 19 Available accessories # You can also perform the same operation by pressing d (TRK). to Entering PIN code for Bluetooth wireless connection on page 56. Rejecting call waiting Using a cellular phone to initiate a connection % Touch to reject a call waiting. # You can also perform the same operation by pressing d (TRK). 1 Touch Phone Connect on the function menu. Introduction to advanced operations 2 Touch Connection Open.
Section Available accessories # If the assignment is empty, the device name is not displayed. If the assignment is already taken, the device name appears. To replace an assignment with a new phone, first delete the current assignment. For more detailed instructions, see Deleting a registered phone on this page. # If the registration failed, device name of the connected phone is not displayed in the selected assignment. In this case, return to step 1 and try again.
Section Available accessories 19 1 Touch to display the Phone Book. 2 Touch c or d to select the first letter of the name you are looking for. 3 Touch Enter to show entries starting with the letter you chose. The display shows the first six Phone Book entries starting with that letter (e.g. “Ben”, “Brian” and “Burt” when “B” is selected). 4 5 5 Touch phone number of the Phone Book entry you want to call. If several phone numbers are entered to an entry, touch one you want to call.
Section Available accessories 2 Touch a phone number or name (if entered) you want to call. The display returns to the normal display and the phone number you selected is displayed on the information bar. 3 Touch to make a call. # For an international call, touch Add “+” to add + to the phone number. 4 To end the call, touch . Using preset numbers Be sure to park your vehicle and apply the parking brake when performing this operation.
Section 19 Available accessories ! Dial Preset (preset phone numbers) After selecting a desired item, a confirmation display appears. Touch OK to delete the memory. # If you do not want to clear memory that you have selected, touch Cancel. # If you want to clear all the Phone Book, dialed/received/missed call history list and preset phone number, touch Clear All. Setting automatic answering % Touch Auto Answer on the function menu to turn the automatic answer on.
Section Available accessories TV tuner Basic Operations 1 2 3 4 1 Source icon Shows which source has been selected. 2 Band indicator Shows which band the TV tuner is tuned to. 3 Preset number indicator Shows which preset has been selected. 4 Channel indicator Shows which channel the TV tuner is tuned. 1 Touch the source icon and then touch TV to select the TV. # When the source icon is not displayed, you can display it by touching the screen. 2 Touch the screen to display the touch panel keys.
Section Available accessories 19 Storing the strongest broadcast stations sequentially % Touch BSSM on the function menu to turn BSSM on. BSSM begins to flash. While BSSM is flashing the 12 strongest broadcast stations will be stored in order from the lowest channel up. When finished, BSSM stops flashing. Digital Signal Processor Introduction of DSP adjustments # To cancel the storage process, touch BSSM again.
Section Available accessories # When playing discs recorded with more than 96 kHz sampling frequency, audio is outputted from front speakers only. # When selecting FM as the source, you cannot switch to Source Level Adjuster. # When playing other than the DVD disc, you cannot switch to Dynamic Range Control. # When neither Front-L nor Front-R is selected in Position, you cannot switch to Time Alignment.
Section 19 Available accessories ! The acoustics of different performance environments are not the same and depend on the extent and contour of space through which sound waves move and on how sounds bounce off the stage, walls, floors and ceilings. At a live performance you hear music in three stages: direct sound, early reflections, and late reflections, or reverberations. Those factors are programed into the SFC circuitry to recreate the acoustics of various performance settings.
Section Available accessories 1 Touch Dynamic Range Control on the DSP function menu. 2 Touch d to turn the dynamic range control on. # To turn dynamic range control off, touch c. Using the down-mix function The down-mix function allows you to play back multi-channel audio in 2 channels. 2 Touch Dolby Pro Logic II. 2 Touch any of the following touch panel keys to select the desired mode.
Section Available accessories 19 4 Touch d to turn the panorama control on. # To turn the panorama control off, touch c. 5 Touch b to select Dimension and then touch c or d to adjust front/rear speaker balance. Each time you touch c or d it moves the sound towards the front or the rear. +3 to -3 is displayed as the front/rear speaker balance moves from front to rear. 6 Touch b to select Center Width and then touch c or d to adjust the center image.
Section Available accessories Note When playing a 2-channel mono source with Dolby Pro Logic II turned on, there may be occasions when the following will occur: ! No audio is outputted if the center speaker setting is Small or Large and no center speaker is installed. ! Audio is heard only over the center speaker if installed and the center speaker setting is Small or Large. Speaker level can be adjusted finely by listening to an audio output.
Section Available accessories 19 2 Touch Start to start the test tone output. The test tone is outputted. It rotates from speaker to speaker in the following sequence at intervals of about two seconds. The current settings for the speaker over which you hear the test tone are shown in the display. Front-L (front speaker left)—Center (center speaker)—Front-R (front speaker right)— Rear-R (rear speaker right)—Rear-L (rear speaker left)—Subwoofer (subwoofer) Check each speaker output level.
Section Available accessories 3 Touch c or d to adjust the distance between the selected speaker and the listening position. Each time you touch c or d increases or decreases the distance. 0.0cm to 500.0cm is displayed as the distance is increased or decreased. 19 3 Touch d to select the equalizer.
Section 19 Available accessories Rear (rear speakers)—Center (center speaker) —Front (front speakers) # You cannot select speakers whose size is set to Off. (Refer to Setting the speaker setting on page 80.) 5 Touch b and then touch c or d to select the equalizer band to be adjusted. Each time you touch c or d selects equalizer bands in the following order: Low (low)—Mid (mid)—High (high) 6 Touch b and then touch c or d to select the center frequency of selected band.
Section Available accessories ! If the microphone is placed in an unsuitable position the measurement tone may become loud and measurement may take a long time, resulting in a drain on battery power. Be sure to place the microphone in the specified location. Before operating the auto TA and EQ function — When the reflected sound within a vehicle is strong and delays occur. — When delays occur for low sounds due to the influence of the LPF on active subwoofers or external amps.
Section 19 Available accessories 3 Turn the ignition switch to ON or ACC. If the car’s air conditioner or heater is turned on, turn it off. Noise from the fan in the air conditioner or heater may prevent correct auto TA and EQ. # Press SRC/OFF to turn the source on if this unit is turned off. 4 Select the position for the seat on which the microphone is placed. Refer to Using the position selector on page 77. # If no position is selected before you start auto TA and EQ, Front-L is selected automatically.
Appendix Additional Information Troubleshooting Common Symptom Cause Action (See) Power doesn’t turn on. The unit doesn’t operate. Leads and connectors are incorrectly connected. Confirm once more that all connections are correct. The fuse is blown. Rectify the reason for the fuse blowing, then replace the fuse. Be very sure to install a fuse with the same rating. Noise and other factors are causing Press RESET. (Page 9) the built-in microprocessor to operate incorrectly.
Appendix Additional Information Nothing is displayed. The touch panel keys cannot be used. The rear view camera is not connected. Camera Polarity is at incorrect setting. Connect a rear view camera. Press and hold MUTE to return to the source display and then select the correct setting for Camera Polarity. (Page 60) Problems during DVD playback Symptom Cause Action (See) Playback is not possible. The loaded disc has a different region number from this unit.
Appendix Additional Information Problems during iPod playback Symptom Cause Action iPod doesn’t operate correctly. Cables are incorrectly connected. Disconnect the cable from iPod. Once iPod main menu is displayed, connect the cable again. Reset the iPod. The iPod version is old. Update the iPod version. Problems during multi-channel processor connection Symptom Cause Action (See) No sounds are heard. The volume level will not rise. Optical cables are not connected correctly.
Appendix Additional Information This unit’s flash memory used for temporary storage area is full. Select the playable file. Authorization Error This unit’s DivX registration code has not been authorized by DivX VOD contents provider. Register this unit to DivX VOD contents provider. (Page 53) Unplayable File This type of file cannot be played by Select the playable file. this unit. It is not possible to write it in the flash.
Appendix Additional Information iPod Message Cause Action Error-02-6X/-9X/-DX Communication failure Disconnect the cable from iPod. Once iPod main menu is displayed, connect the cable again. Reset the iPod. iPod failure Disconnect the cable from iPod. Once iPod main menu is displayed, connect the cable again. Reset the iPod. Error-02-67 Old version of iPod Update the iPod version. No Songs No songs Transfer the songs to iPod.
Appendix Additional Information Understanding messages 92 Messages Translation CAUTION: Screen image may appear reversed. Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed.
Appendix Additional Information Handling guideline of discs and player ! Use only discs featuring any of following logos. DVD video Video CD ! Use only normal, round discs. If you insert irregular, non-round, shaped discs they may jam in the DVD player or not play properly. CD Additional Information ! Check all discs for cracks, scratches or warping before playing. Discs that have cracks, scratches or are warped may not play properly. Do not use such discs.
Appendix Additional Information DVD-R/DVD-RW discs CD-R/CD-RW discs ! Unfinalized DVD-R/-RW discs which have been recorded with the Video format (video mode) cannot be played back. ! It may not be possible to play back DVD-R/ DVD-RW discs, because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of this unit. ! Playback of discs recorded on a personal computer may not be possible, depending on the application settings and the environment.
Appendix Additional Information Compressed audio compatibility WMA ! Compatible format: WMA encoded by Windows Media Player ! File extension: .wma ! Bit rate: 5 kbps to 320 kbps (CBR), VBR ! Sampling frequency: 8 kHz to 48 kHz ! Windows Media Audio 9 Professional, Lossless, Voice: No AAC ! Compatible format: AAC encoded by iTunes ! File extension: .m4a ! Bit rate: 8 kbps to 320 kbps ! Sampling frequency: 8 kHz to 44.
Appendix Additional Information ! Do not leave the USB portable audio player/USB memory in high temperature. ! Firmly secure the USB portable audio player/USB memory when driving. Do not let the USB portable audio player/USB memory fall onto the floor, where it may become jammed under the brake or accelerator pedal. ! Depending on the USB devices connected to this unit, it may generate noise in the radio.
Appendix Additional Information ! ! ! About handling the iPod CAUTION ! Pioneer accepts no responsibility for data lost on the iPod even if that data is lost while using this unit. ! Do not leave the iPod in direct sunlight for extended amounts of time. Extended exposure to direct sunlight can result in iPod malfunction due to the resulting high temperature. ! Do not leave the iPod in a high temperature. ! Firmly secure the iPod when driving.
Appendix Additional Information ! DivX VOD file playback requires ID code of this unit to DivX VOD provider. About ID ® code, refer to Displaying your DivX VOD registration code on page 53. ! For more details about DivX, visit the following site: http://www.divx.com/ DivX compatibility ! Compatible format: DivX video format implemented in relation to DivX standards ! File extensions: .avi or .
Appendix Additional Information ! The LCD screen will be difficult to see if it is exposed to direct sunlight. ! When using a portable phone, keep the antenna of the portable phone away from the display to prevent disruption of the video by the appearance of spots, colored stripes, etc. projected. If this happens, consult your dealer or the nearest authorized PIONEER Service Station.
Appendix Additional Information Language code chart for DVD Language (code), input code Japanese (ja), 1001 English (en), 0514 French (fr), 0618 Spanish (es), 0519 German (de), 0405 Italian (it), 0920 Chinese (zh), 2608 Dutch (nl), 1412 Portuguese (pt), 1620 Swedish (sv), 1922 Russian (ru), 1821 Korean (ko), 1115 Greek (el), 0512 Afar (aa), 0101 Abkhazian (ab), 0102 Afrikaans (af), 0106 Amharic (am), 0113 Arabic (ar), 0118 Assamese (as), 0119 Aymara (ay), 0125 Azerbaijani (az), 0126 Bashkir (ba), 0201 Byel
Appendix Additional Information Copyright and trademark notice ! This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Appendix Additional Information Dolby Pro Logic II Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. DTS Digital Out Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
Appendix Additional Information Terms AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG 2 and MPEG 4. Aspect ratio This is the width-to-height ratio of a TV screen. A regular display has an aspect ratio of 4:3. Wide screen displays have an aspect ratio of 16:9, providing a bigger picture for exceptional presence and atmosphere. Chapter DVD titles are in turn divided into chapters which are numbered in the same way as the chapters of a book.
Appendix Additional Information ISO9660 format This is the international standard for the format logic of CD-ROM folders and files. For the ISO9660 format, there are regulations for the following two levels. Level 1: The file name is in 8.3 format (the name consists of up to 8 characters, half-byte English capital letters and half-byte numerals and the “_” sign, with a file-extension of three characters). Level 2: The file name can have up to 31 characters (including the separation mark “.
Appendix Additional Information Packet write This is a general term for a method of writing on CD-R, etc., at the time required for a file, just as is done with files on floppy or hard discs. Parental lock Some DVD video discs with violent or adult-oriented scenes feature parental lock which prevents children from viewing such scenes. With this kind of disc, if you set the unit’s parental lock level, playback of scenes inappropriate for children will be disabled, or these scenes will be skipped.
Appendix Additional Information Specifications General Power source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative type Max. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 178 mm × 100 mm × 165 mm Nose ........................... 171 mm × 97 mm × 8 mm Weight .......................................... 1.7 kg Display Screen size/aspect ratio .......
Appendix Additional Information MW tuner Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz) Usable sensitivity ..................... 25 µV (S/N: 20 dB) Signal-to-noise ratio ............... 62 dB (IEC-A network) LW tuner Frequency range ...................... 153 kHz to 281 kHz Usable sensitivity ..................... 28 µV (S/N: 20 dB) Signal-to-noise ratio ...............
Index A Angle icon ..................................................26,.51 Aspect ratio .............................................51,.103 Audio language ...................................25,.38,.50 B Bookmark .........................................................24 Brightness ........................................................59 C Chapter ...........................................................103 Code number ...................................................52 Color .......................
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
