Owner's Manual

Table Of Contents
Section
(~l_n_st_a_ll_a_t_io_n
__________________________________
)CBI
4 m
(13ft.1
in.)
~
~Microphone
(AVH-P4400BH/AVH-P3400BH/AVH-P2400BT only)
----Microphone
input (AVH-P4400BH/AVH-P3400BH/AVH-P2400BT
only)
~--Wired
remote input
Hard-wired remote control adaptor can
be
connected
(sold separately).
Violet/white
Of
the two
lead
wires connected to the back lamp, connect the one
in
which the voltage changes when the gear shift
is
in
the
REVERSE
(R)
position. This connection enables the unit to
sense whether the car
is
moving forwards or backwards.
Yellow/black
If
you
use
an
equipment with Mute function, wire this
lead
to
the Audio Mute
lead
on
that equipment.
If
not, keep the Audio
Mute
lead
free of any connections.
Connection
method
1.
Clamp
the lead.
Note:
2.
Clamp
firmlywith
needle-nosed
•.
ptiers.
·
The
positiOl"l
of the
parking
brake
switch
depend$
orrthe
vehible•model.
For
details,
consult
th~
vehicle
Owner's Manual or dealer.
Light green
Used to detect the
ON/OFF status of the parking
brake. This
lead
must
be
connected to the power
supply side of the parking brake switch.
Blue/white
Power
supply side
Connect
to system control terminal of the power amp or
~-antenna
relay control terminal
(max.
300
mA
12
V
DC).
With a 2 speaker system, do not connect anything to the speaker leads
that are not connected to speakers.
En