Owner's Manual

Section
(~M
__
e_n_u_o~p~e_r_a_t_io_n_s
______________________________
~)CEI
4 Touch Rear Speaker on the system
menu
to
switch
the
subwoofer output or
full-range speaker.
•
When
no
subwoofer
is
connected to the rear
output, select
Full
(full-range speaker).
•
When a subwoofer
is
connected to the
rear
output, select
Subwoofer
(subwoofer).
Notes
•
Even
if
you
change this setting, there will
be
no
output unless
you
turn the subwoofer out-
put
on
(refer to
Using
sub
woofer
output
on
page
59).
•
Both rear speaker
lead
outputs
and
RCA
rear
output
are
switched simultaneously in this
setting.
Switching sound
muting/
attenuation
Sound
from
this
system is automatically
muted
or
attenuated when a signal from
equipment
with
a
mute
function is received.
•
Sound
from
this
system returns
to
normal
when the
muting
or
attenuation is can-
celed.
1
Display
the
system menu.
Refer
to
Introduction
of
menu operations
on
page
57.
2
Touch
Mute/
ATT
until
the
desired set-
ting appears.
Touch
Mute/ATT
until the desired setting ap-
pears in
the
display.
•
Mute-
Muting
•
ATT
-20dB-
Attenuation
(ATT
-20dB
has
a
stronger effect than
ATT
-10dB)
•
ATT
-10dB-
Attenuation
•
Off-
Turns the sound muting/attenuation
off
Notes
•
When
Mute
is
displayed, the sound
is
turned
off and no audio adjustments can
be
made.
•
When
ATT
is
displayed, the sound
is
attenu-
ated and only the volume
can
be
adjusted.
(No other audio adjustments
can
be
made.)
• Operation returns to normal when
the
phone
connection
is
ended.
Seleding
the
system language
The system language can
be
selected from
nine languages.
If
text
information
such
as
the title name, artist
name
or
a
comment
is embedded in a Eur-
opean language, they can also
be
displayed
on
this
unit.
• The language can
be
changed for the fol-
lowing:
-System
menu
- On-screen display
(English and Russian only)
-Multi
language setting
for
DivX
(English and Russian only)
-Language
for
cautions
Some operations on this
unit
are
prohib-
ited
from
use while driving
or
require
careful attention when operated.
In
such
cases, a caution
will
appear on the
display.
You
can change the language
for
caution messages with this setting.
• If
the
embedded language and
the
selected
language
setting are not the
same,
text in-
formation
may not display properly.
•
Some
characters may not be displayed
properly.
1
Display
the
system menu.
Refer
to
Introduction
of
menu operations
on
page
57.
2
Touch System Language on the system
menu
to
select
the
desired
language.
3
Touch
the
desired
language.
English
(English)-Fran~ais
(French)-
Deutsch
(German)-Espaiiol
(Spanish)
-PyccKMM
(Russian)-Portugues
(Portu-
guese)~JLII
(Arabic)~Jl.i
(Persian)
-n,lJlJ
(Hebrew)
En@