Manual

! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight and
high temperatures.
! If removed, replace the front panel on the unit
before starting up your vehicle.
1 Press h (eject) to release the front
panel.
2 Touch the detach key.
The front pane l automatically
slides toward you.
3 Slide the dial at the bottom of the front
panel to the right, and lift up the front
panel while pushing down on the dial.
4 Put the front panel into the provided
protective case for safe keeping.
Attaching the front panel
1 Slide the front panel into the top of the
unit and push it into place.
Slide the inserter on the front panel into the in-
sertion slot on top of the unit and push it into
place.
2 Push on the bottom of the front panel
until it clicks into place .
Setting the clock
1 Switch to Clock Adjustment display.
Refer to Basic operations on page 9.
2 Select the item to set.
3 Touch a or b to set the correct date
and time.
Resetting the microprocessor
By pressing RESET, you can reset the micro-
processor to its initial settings without chan-
ging the bookmark information.
The microprocessor must be reset in the fol-
lowing situations:
! Before using this unit for the first time af ter
installation
! If the unit fails to operate properly
En
13
Section
04
Basic operations
Basic operations