Owner's Manual

23
Chapter
52
En
Selects the adjustable next item.
Each time you touch the key, the level of the
selected item increases or decreases.
p “Brightness”, “Contrast”, “Color” and
“Hue” can be adjusted from “-24” to
“+24”.
p “Dimmer” can be adjusted from “+1” to
“+48”.
p “Temperature” can be adjusted from
“+3” to “-3”.
p The adjustments of “Brightness” and
“Contrast” are stored separately when
your vehicle’s headlights are off (daytime)
and when your vehicle’s headlights
are on (nighttime). These are switched
automatically depending on whether the
vehicle’s headlights are on or off.
p The adjustment of “Dimmer” is stored
separately when your vehicle’s headlights
are off (daytime) and when your vehicle’s
headlights are on (nighttime). “Dimmer”
is switched automatically only when the
value of nighttime is lower than that of
daytime.
p The picture adjustment may not be avail-
able with some rear view cameras.
p The setting contents can be memorized
separately for the following screens and
video images.
— DVD, Video CD and Disc
— AV
— USB (Video), USB (JPEG) and
MirrorLink
— SD (Video) and SD (JPEG)
— HDMI and AppRadio Mode (HDMI)
— MIXTRAX, images output from the exter-
nal device
Displaying the Ærmware
version
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “System” screen appears.
3 Touch [System Information].
4 Touch [Firmware Information].
The “Firmware Information” screen
appears.
Updating Ærmware
CAUTION
The only USB port that supports the
firmware update is USB port 1.
Never turn this product off, eject the SD
memory card or disconnect the USB
storage device while the firmware is
being updated.
You can only update the firmware when
the vehicle is stopped and the parking
brake is engaged.
1 Download the firmware update
files.
2 Connect a blank (formatted) SD
memory card or USB storage
device to your computer, and then
locate the correct update file and
copy it onto the SD memory card or
USB storage device.
3 Turn the source off.
For details, refer to Turning off the AV
source on page 12.
4 Press the HOME button to display
the Top menu screen.
5 Touch the following keys in the
following order.
The “System” screen appears.
6 Touch [System Information].
7 Touch [Firmware Update].
The “Firmware Update” screen appears.
8 Touch [Continue] to display the
data transfer mode.
p Follow the on-screen instructions to finish
updating the firmware.
p This product will reset automatically after
the firmware update is completed if the
update is successful.
p When the firmware update starts, the
source is turned off and the Bluetooth
connection is disconnected.
p If an error message appears on the
screen, touch [Continue] to proceed and
start the recovery sequence.
Checking the connections of
leads
Check that the leads are properly connected
between this product and vehicle. Also
check whether they are connected in the
correct positions.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “System” screen appears.
3 Touch [System Information].
4 Touch [Connection Status].
The “Connection Status” screen appears.
Illumination
When the headlights or small lamps of
the vehicle are on, “ON” is displayed.
When the small lamps of the vehicle are
off, “OFF” is displayed. (If the orange/
white lead is not connected, “OFF”
appears.)
iDatalink
When the optional iDatalink adapter
is connected and the protocol version
matches, “OK” is displayed. If the version
does not match, “Unsupported version”
is displayed. If the optional iDatalink
adapter is not connected, “NOK” is
displayed.
Audio adjustments
Using fader/balance
adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
p This function is available when “Rear
Speaker” is set to “On”.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “Audio” screen appears.
3 Touch [Fader/Balance].
The “Fader/Balance” screen appears.
4 Touch the following keys to adjust
the front/rear speaker balance.
Moves towards the front.
Moves towards the rear.
Each time you touch the keys, the front/rear
speaker balance moves towards the front
or rear.
p “Front25” to “Rear25” is displayed as the
front/rear speaker balance moves from
the front to rear.
p The default setting is “F/R 0 L/R 0”.
p Set “Front” and “Rear” to “0” when using
a dual speaker system.