English AVH-3500NEX DVD RDS AV RECEIVER Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Contents Important The screen shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements. ■ Precaution ................................................................................... 4 ■ Parts and controls..................................................................... 12 ■ Basic operation ......................................................................... 15 ■ Bluetooth..................................................
Theme settings................................................................................................................................................. 92 Audio settings .................................................................................................................................................. 93 Video settings .................................................................................................................................................
Precaution Information to user –This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. –Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. –NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CAUTION This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2014. CLASS 1 LASER PRODUCT CAN ICES-3 B/NMB-3 B WARNING • This product contains chemicals known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling. • Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating.
– Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas. Important safety information Before using this product, be sure to read and fully understand the following safety information: • Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle.
Parking brake interlock Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving.
When using a display connected to rear monitor output The video output terminal (rear monitor output) is for connection of a display to enable passengers in the rear seats to watch video images. To avoid battery exhaustion Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery. WARNING Do not install this product in a vehicle that does not have an ACC wire or circuitry available.
Failure to operate After-sales service for Pioneer products Visit our website Visit us at the following site: http://www.pioneerelectronics.com http://www.pioneerelectronics.ca 1 2 3 4 Register your product. Receive updates on the latest products and technologies. Download owner’s manuals, order product catalogs, research new products, and much more. Receive notices of software upgrades and software updates.
About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used. This indicates to touch the appropriate soft key on the touch screen. This indicates to touch and hold the appropriate soft key on the touch screen. Protecting your unit from theft The front panel can be detached to deter theft. Important • • • • • Handle the front panel with care when removing or attaching it.
2 The front panel and the head unit are connected on the left side. Make sure that the front panel has been properly connected to the head unit. Press the right side of the front panel until it is firmly seated. If you can’t attach the front panel to the head unit successfully, try again. Forcing the front panel into place may result in damage.
Parts and controls Main unit English LCD screen or Volume/SRC/ OFF Press to return to the previous track (chapter) or go to the next track (chapter). Press and hold to perform fast reverse or fast forward. Press to answer or end a call. Turn to adjust the volume. Press to cycle through all the available sources. Press and hold to turn the source off. Press to activate the voice recognition mode such as Siri when the iPhone is connected to the unit via Bluetooth or USB.
Disc-loading slot RESET Press to reset the microprocessor (page 17). Remote control Volume (+/-) MODE SRC TOP MENU MENU Thumb pad MUTE AUDIO SUBTITLE ANGLE Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] (page 85). Press to cycle through all the available sources. Press and hold to turn the source off.
BAND/ESC RETURN or FOLDER/P.CH - 14 - English or Press to select the tuner band when tuner is selected as a source. Press to switch between media file types when playing the following types of data: • Disc • USB Press to return to the specified point and start playback from there. Press to pause or resume playback or play from the beginning when resume is off. For audio: Press and hold to perform fast reverse or fast forward. For video: Press to perform fast reverse or fast forward.
Basic operation Notes on using the LCD panel CAUTION • Do not open or close the LCD panel forcefully. It may cause a malfunction. • Do not operate this product until the LCD panel has completely opened or closed. If this product is operated while the LCD panel is opening or closing, the LCD panel may stop at that angle for safety. • Do not place glass or can on the open LCD panel. Opening and closing the LCD panel The LCD panel will open or close automatically when the ignition switch is turned on or off.
Setting the automatic open function To prevent the display from hitting the shift lever of an automatic vehicle when it is in the P (park) position, or when you do not wish the display to open/close automatically, you can set the automatic open function to manual mode. 1 Press . 3 4 English 2 Touch then . The system setting screen appears. Touch [Auto Flap]. Touch the item. [On] The LCD panel will open or close automatically when the ignition switch is turned on or off.
• When adjusting the LCD panel angle, be sure to adjust from the flap menu. Forcibly adjusting the LCD panel by hand may damage it. English 1 2 Press and hold OPEN/CLOSE to display the flap menu. Touch (tilt down) or viewable angle. (tilt up) to adjust the LCD panel to an easily NOTE As the set angle is saved, the LCD panel will automatically be adjusted to the same position the next time the LCD panel is opened.
2 Press RESET with a pen tip or other pointed tools. Settings and recorded contents are reset to the factory settings. Preparing the remote control How to replace the battery Insert the CR2025 (3 V) battery with the plus (+) and minus (-) poles orientated properly. WARNING • Do not ingest the battery, Chemical Burn Hazard. (The remote control supplied with) This product contains a coin/button cell battery.
Using the remote control Point the remote control in the direction of the front panel to operate. NOTE The remote control may not function properly in direct sunlight. Starting up the unit 1 2 3 4 Start the engine to boot up the system. The [Select Program Language] screen appears. NOTE From the second time on, the screen shown will differ depending on the previous conditions. Touch the language. Touch . The [Speaker Mode Settings] screen appears. Touch the speaker modes.
Switching the speaker mode To change the speaker mode, you need to restore this product to the default settings. 1 Restore the default setting (page 106). You can operate this product by touching the keys on the screen directly with your fingers. NOTE To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. Common touch panel keys : Returns to the previous screen. : Close the screen.
Operating the time bar Operating the menu bar 1 Press . The menu bar pops up on the screen. NOTE The menu bar availability may vary depending on the activating source. Switches the dimmer duration by day or night. Switches between playback and pause. Skips files forward or backward. Performs fast reverse or fast forward. Displays setting menu screen (page 84). Closes the menu bar. - 21 - English You can change the playback point by dragging the key.
Top menu screen English Switches the top menu screen layout. 1 Touch and hold . appears at the top of the screen. 2 Touch . When you finish switching the layout, press . Favorite source icons TIP If you select [Power OFF], you can turn off almost all functions. • An incoming call is received (only for hands-free phoning via Bluetooth). • A rear view camera image is input when the vehicle is in reverse. • A button on this unit is pressed.
Settings (page 84) and Favorite menu (page 104) Connected device key Displays connected device. Switches the source or application with connected devices such as WebLink, Apple CarPlay and Android Auto. 1 Touch and hold . appears at the top right of the favorite application key. 2 Drag to the desired position. When you finish adjusting, press . NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake.
Bluetooth Bluetooth connection 4 5 6 Turn on the Bluetooth function on the device. Press . Touch then . The Bluetooth screen appears. Touch [Connection]. Touch . The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list.
CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device. To disconnect the device, touch the name of the connected device in the list.
Hands-free phoning To use this function you need to connect your cellular phone to this product via Bluetooth in advance (page 24). CAUTION For your safety, avoid talking on the phone as much as possible while driving. Making a phone call 1 2 3 Press . Touch . The phone menu screen appears. Touch one of the call icons on the phone menu screen.
The following items are displayed. • Name of the current cellular phone • List number of the current cellular phone • Reception status of the current cellular phone • Battery status of the current cellular phone English TIP If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. Switches the search language to English or system language. NOTE It may not appear depending on the system language setting.
2 3 4 Touch . Touch or . On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch . English ▶Dialing from the preset dial list 1 2 Touch . Touch the desired entry on the list to make a call. The dial screen appears and dialing starts. ▶Deleting a phone number 1 2 3 4 5 Press . Touch . Touch . Touch . Touch [Yes]. Receiving a phone call 1 Touch Touch TIPS • Touch • Touch to answer the call. to end the call.
1 2 3 Press . Touch . Touch . The voice recognition function launches and the voice control screen appears. Minimizing the dial confirmation screen 1 Touch . TIP To display the dial confirmation screen again, touch on the top menu screen (page 22). NOTES • The dial confirmation screen cannot be minimized on the AV operation screen. • AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call.
1 Touch or to turn private mode on or off. Adjusting the other party’s listening volume This product can be adjusted to the other party’s listening volume. 1 Touch to switch between the three volume levels. Notes for hands-free phoning ▶General notes • Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.
▶The received call and dialed number histories • You cannot make a call to the entry of an unknown user (no phone number) in the received call history. • If calls are made by operating your cellular phone, no history data will be recorded in this product. • If there are more than 1 000 phone book entries on your cellular phone, not all entries may download completely. • Depending on the phone, this product may not display the phone book correctly.
The Bluetooth audio playback screen appears. Basic operation Bluetooth audio playback screen English Track number indicator Switches between playback and pause. Skips files forward or backward. • By pressing then touch or backward. • By pressing then touch and hold reverse or fast forward. , you can also skip files forward or or , you can also perform fast Sets a repeat play range. Plays files in random order. Selects a file or folder from the list to playback.
AV source Supported AV source Displaying the AV operation screen 1 Press then touch the AV operation key. The AV operation screen appears. Displays the source list. Selects or customizes the equalizer curve (page 94). - 33 - English You can play or use the following sources with this product. • Radio • CD • Disc (compressed audio or video files on discs) • DVD-Video • USB The following sources can be played back or used by connecting an auxiliary device.
Selecting a source Source on the AV source selection screen Press then touch . Touch the source icon. When you select [Source OFF], the AV source is turned off. Source on the source list 1 2 3 Press then touch the AV operation key. Touch . Touch the source key. When you select [Source OFF], the AV source is turned off. Changing the display order of source NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake.
Adjusting the range of favorite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. 3 Press . Touch and hold . appears at the top left of the favorite source icons. Drag to the desired position. When you finish adjusting, press .
Radio Starting procedure Press then touch English 1 2 . Touch [Radio]. The Radio screen appears. Basic operation Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects the FM1, FM2, FM3, or AM band. Performs BSM (best stations memory) function (page 37).
Manual tuning Seek tuning or non stop seek tuning Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform non stop seek tuning. then touch or , you can also switch the preset channels. then touch and hold or and releasing it, you can also perform seek tuning.
Menu Item Description [Local] Local seek tuning allows you to only tune into [Off] radio stations with sufficiently strong signals. FM: [Level1] [Level2] [Level3] [Level4] NOTES AM: [Level1] [Level2] - 38 - English • [Level4] for FM and [Level2] for AM are available only with the stations with the strongest signals. • This setting is available only when [Radio] is selected as the source.
Disc Inserting and ejecting a disc CAUTION Do not insert anything other than a disc into the disc-loading slot. Inserting a disc 1 Insert a disc into the disc-loading slot. The source changes and then playback will start. NOTE If the disc is already set, select [Disc] as the playing source. Ejecting a disc 1 Press . Basic operation TIPS • By pressing then touch or , you can also skip files/chapters forward or backward.
Audio source Audio source screen English Track number indicator Switches between playback and pause. Skips files forward or backward. Sets a repeat play for the current disc/the current track. Plays or does not play tracks in random order. Selects a track from the list. Touch a track on the list to play back. Video source CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Video source screen 1 English Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Performs fast reverse or fast forward. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Performs slow-motion playback. Each time you touch , it changes the speed in four steps in the following order: 1/16 -> 1/8 -> 1/4 -> 1/2 Displays the DVD menu. NOTE This function may not work properly with some DVD disc content.
Searches for the part you want to play. Touch [Title], [Chapter], [10Key], or [Track] then input the desired number from [0] to [9]. To start playback from the number you registered, touch . Skips files/chapters forward or backward. * PBC (playback control) only Video source screen 2 Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the left to the right. Selects the audio output from [L+R], [Left], [Right], [Mix].
Resumes playback (Bookmark). This function is available for DVD-Video. You can memorize one point as a Bookmark for a disc (up to five discs). To clear the bookmark on the disc, touch and hold this key. Returns and begins playback from the specified point. This function is available for DVD-Video and Video-CDs featuring PBC (playback control).
Compressed files Inserting and ejecting media CAUTION Do not insert anything other than a disc into the disc-loading slot. Inserting a disc 1 Insert a disc into the disc-loading slot. The source changes and then playback will start. NOTE If the disc is already set, select [Disc] as the playing source. Ejecting a disc 1 Press . Plugging a USB storage device 1 2 Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable.
USB storage device Unplugging a USB storage device 1 Pull out the USB storage device from the USB cable. Starting procedure For Disc 1 Insert the disc (page 44). TIP If the disc is already set, select [Disc] as the playing source. For USB 1 2 3 Press then touch . Plug the USB storage device into the USB cable (page 44). Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files.
English Displays the link search screen. Touch the song to play back followed by touching the song information, after switching to Music Browse mode (page 47). TIP If you touch the artwork, the list of songs in the album is displayed. NOTE This function is available for the USB storage device only. Switches between playback and pause. Skips files forward or backward. Sets a repeat play range for all files/the current folder/the current file. Plays files or does not play in random order.
Selects a file from the list. Touch a file on the list to playback. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it. Audio source screen 2 (Example: USB) Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the left to the right. Selects the previous folder or the next folder. Constructs the database for using the Music Browse mode (page 47). Switches the current music information display.
2 3 4 5 Touch . Touch the desired category to display the file list. TIP Once the database is created in the USB storage, there is no need to create the database again as long as the same contents are saved. To enter the Music Browse mode directly, touch and then touch [Tag] before selecting the song. Video source CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Performs frame-by-frame playback. Performs slow-motion playback. Switches the audio/subtitle language. NOTE Switching of the subtitle function is only available on disc. Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [CD-DA]: Audio data (CD-DA) [Photo]: Image files Selects a file from the list. Touch a file on the list to playback. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it.
Still image screen English Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Skips files forward or backward. Selects the previous folder or the next folder. Saves the current images as the wallpaper. Touch the following items then touch [Yes] to overwrite the image. [As AVScreen]: Saves the image as the wallpaper for the AV screen. [As HomeScreen]: Saves the image as the wallpaper for the top menu screen.
Selects a file from the list. Touch a file on the list to playback. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it.
iPod Connecting your iPod NOTES • Depending on the generation or version of the iPod, some functions may not be available. • Do not delete the Apple Music app from your iPod, since some functions may not be available. 1 2 3 Connect your iPod. • iPhone or iPod via USB or Bluetooth Press then touch . Touch [iPod]. NOTES • For USB connection, refer to the Installation Manual. • For Bluetooth connection, see page 24.
Displays the link search screen. Select a song from the list related to the song currently playing. TIP If you touch the artwork, the list of songs in the album is displayed. Switches between playback and pause. Skips files forward or backward. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly. Displays the hidden function bar. NOTE Only available when audiobook is played. Switches among connected devices.
Audio source screen 2 English Changes the audiobook speed. Normal—Fast—Slow Displays the hidden function bar. Apple Music Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.
Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. • Touch [Add to iTunes Wish List] to add the current song to the iTunes wish list. NOTE This function may not be used depending on your Apple Music account status. English Skips tracks forward.
WebLink™ NOTES • The supported finger gestures may vary depending on the WebLink compatible application. • To use WebLink, you must first install the WebLink Host app on the iPhone or smartphone. For details about the WebLink Host app, visit the following site: https://www.abaltatech.com/weblink/ • Be sure to read Using app-based connected content (page 123) before you perform this operation. • Copyright protected files such as DRM cannot be played.
English Displays the main menu of the WebLink source screen. TIP When the rear display is connected to this unit, video from the WebLink screen can be displayed to the rear display except while the AV source with video content is active even while driving. For iPhone users System requirement iOS 10.0 or higher (up to iOS 11.x) NOTE iPhone 4s is not available on the WebLink. 1 2 3 4 5 Unlock your iPhone and connect it to this product via USB. Refer to the Installation Manual. Press . Touch .
Refer to the Installation Manual. Press . Touch . Touch [WebLink]. Touch desired icon in the tab. The WebLink app is launched. English 2 3 4 5 Using the audio mix function You can output the audio mixing AV source and an application for iPhone when WebLink is used. NOTES • This function is only available when WebLink is used with an iPhone. • Depending on the application or AV source, this function may not be available. 1 2 Start up the WebLink. Press VOL (+/-).
Apple CarPlay You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTE The compatible finger gestures vary depending on the application for the iPhone. WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
3 4 Touch [Driving Position]. English Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure 1 2 3 4 5 Connect an Apple CarPlay compatible device to this product via USB. Press Touch . . Touch [Apple CarPlay]. Touch Apple CarPlay icon in the tab. The application screen appears. TIP You can use Siri function by pressing button once Apple CarPlay is activated.
Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears. - 61 - English Touch to mute. Touch again to cancel mute.
Android Auto™ You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTES • [USB MTP] is set to [Off] to use Android Auto (page 85). • The compatible finger gestures vary depending on the application for the smartphone. WARNING Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.
3 4 Touch [Driving Position]. English Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure 1 2 3 4 5 Connect an Android Auto™ compatible device to this product via USB. Press Touch . . Touch [Android Auto]. Touch Android Auto icon in the tab. The application screen appears. TIP You can use voice recognition function by pressing button once Android Auto is activated.
Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears. Setting the auto-launch function If this function is set to on, Android Auto will launch automatically when an Android Auto compatible device is connected to this product.
Pandora® WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Important • Create a free or a paid account online.
3 4 Touch [Pandora]. Launch the Pandora application on the mobile device and start playback. NOTES • For details on Bluetooth connection, see page 24. • For details on USB connection, refer to the Installation Manual. English Basic operation Playback screen Recalls the preset station stored to a key from the memory. Stores the current station to a key. Displays the preset station list. Select an item on the list ([1] to [6]) to switch to the preset station. Switches between playback and pause.
Creates a new station. Touch [Track] or [Artist] to create a new station. Adds information for the track currently playing to bookmarks. Switches among connected devices. TIP Shared stations are indicated by * and . are not available when using a shared station. - 67 - English Selects a Pandora station from the list. • : Switches to the station list. • : Switches to the genre list. • : Plays only one track based on particular musical characteristics from several shuffled stations.
Spotify® WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Important • To use Spotify, you need to connect to the Internet via 3G, EDGE, LTE (4G), or a Wi-Fi network.
Touch then . Touch [AV Source Settings]. Confirm that [Spotify] is turned on. Press then touch . Touch [Spotify]. NOTES • For details on Bluetooth connection, see page 24. • For details on USB connection for iPhone, refer to the Installation Manual. Basic operation Playback screen 1 (Track) Switches between playback and pause. Skips tracks forward or backward. TIP By pressing then touch , you can skip tracks forward.
Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the right to the left. Switches among connected devices. Playback screen 2 (Track) Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the left to the right. Sets a repeat play range. Plays tracks in random order. - 70 - English Selects a track or station from the list.
Playback screen 1 (Radio mode) English Switches between playback and pause. Skips tracks forward or backward. TIP By pressing then touch , you can skip songs forward. NOTE The number of tracks that are skipped varies depending on the application. Starts new radio mode. Saves or deletes the current song information to or from Your Music. Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the right to the left. Switches among connected devices.
Playback screen 2 (Radio mode) English Displays the hidden function bar. TIP You can also display the hidden function bar by flicking the bar from the left to the right. Gives a Thumbs Up to the playing track. Gives a Thumbs Down to the playing track and skips to the next track. NOTE The number of tracks that are skipped varies depending on the application.
SiriusXM® Satellite Radio Subscribing to the SiriusXM Satellite Radio service 1 2 3 4 Press then touch . Touch [SiriusXM]. You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly. Switch to Channel 0 and check the Radio ID. The SiriusXM Radio ID can be found by tuning in to Channel 0. You will need this number to activate your subscription. NOTE The SiriusXM Radio ID does not include the letters I, O, S, or F.
Listening to SiriusXM 1 2 Press then touch . Touch [SiriusXM]. TIPS • By pressing then touch or , you can move the preset channels up or down on the current channel screen, and skip files forward or backward on the play time indicator screen. • By pressing then touch and hold or , you can move channels up or down on the current channel screen, and perform fast reverse or fast forward on the play time indicator screen.
Performs TuneScan™ (page 76). Switches TuneMix™ to on or off. You can use TuneMix™ from each of the music channels stored as presets on the current band. Performs channel number up/down. Performs fast channel number up/down. Switches to the channel broadcasting the traffic and weather information for the selected city (Traffic & Weather Now™). Touch the desired city to access the latest Traffic & Weather report for your favorite market. To cancel Traffic & Weather Now™, touch .
Selects a channel from the list. Select the category name or the list of all channels then touch the desired channel. To switch the display list, touch . NOTES • The types of categories available depend on the types of channels available. • It may take time to display the channel list depending on the SiriusXM reception condition. Replay™ Mode (Time bar display) Switches between playback and pause. Performs content forward or backward. Performs fast forward or rewind. Switches to live broadcast mode.
• TuneScan™ may take a few minutes to become available after the product is turned on or the preset band is changed. 1 Touch to display the following display. English Continues playing the current scanning song or channel. Skips to the previous/next song during TuneScan™ or to the previous/next channel during category scan. Cancels scan play and returns to the previous channel. SportsFlash™ SportsFlash™ will notify you when a big play happens during a game with one of your favorite sports teams.
For details, see [Featured Favorites] and [Featured Band Update Message] in SiriusXM settings (page 78). How to access Parental lock The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content. When enabled, the Parental Control feature requires you to enter a passcode to tune to the locked channels. For details, see [Parental Control] in SiriusXM settings (page 79). SiriusXM settings 1 2 3 4 Press . Touch then .
Description [Parental Control] Enter the current passcode then touch to set this function (the default passcode is 0000). • To edit the passcode, touch [Edit Code] then touch followed by entering the new passcode. • To lock the channel, touch the appropriate channel. appears and the channel is locked. TIPS • When you touch the locked channel, the channel is unlocked. • When you touch [Clear All], all locked channels are unlocked.
Menu Item Description [SiriusXM Reset] Set to restore to the default Sirius XM settings by touching [Restore]. CAUTION Do not turn off the engine while restoring the settings. - 80 - English NOTES • This setting is available only when you stop your vehicle in a safe place and apply the parking brake. • The source is turned off before the process starts.
AUX You can display the video image output by the device connected to video input. NOTE A Mini-jack AV cable (sold separately) is required for connection. For details, refer to the Installation Manual. Starting procedure 1 2 3 4 5 6 Press Touch . then . Touch [Input/Output settings]. Confirm that [AUX Input] is turned on. Press then touch . Touch [AUX]. The AUX screen appears.
Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 105). Switches between the video input and audio input.
AV input You can display the video image output by the device connected to video or camera input. For details, refer to the Installation Manual. Starting procedure 1 2 3 4 5 6 7 Press . Touch then . Touch [Input/Output settings]. Touch [AV Input]. Touch [On]. Press then touch . Touch [AV]. The video image is displayed on the screen. - 83 - English CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion.
Settings You can adjust various settings in the main menu. 1 2 3 Press . Touch . Touch one of the following categories, then select the options. System settings (page 84) Theme settings (page 92) Audio settings (page 93) Video settings (page 100) Bluetooth settings (page 24) System settings The menu items vary according to the source.
[Auto Mix] Menu Item Description [Auto Mix] [On] [Off] Select whether to perform mixing the sound output from WebLink and AV source sound automatically. [Input/Output settings] Menu Item Description [USB MTP] [Off] [On] Select whether or not to activate USB MTP (Media Transfer Protocol) connection. [AV Input] [On] [Off] Select AV input source (page 83). [AUX Input] [On] [Off] Set to [On] for AUX source (page 81). [Camera settings] A separately sold rear view camera (e.g.
• Immediately verify whether the display changes to the rear view camera image when the shift lever is moved to REVERSE (R) from another position. • When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in [Camera Polarity]. • If you touch while the camera image is displayed, the displayed image turns off temporarily. Description [Back Camera Input] [Off] [On] Setting rear view camera activation.
Menu Item Description [Parking Assist Guide Adjust] Adjusting the guidelines by dragging or touching / / / on the screen. Touch [Default] to reset the settings. / / CAUTION NOTES • This setting is available only when you stop your vehicle in a safe place and apply the parking brake. • Using packing tape or similar tape place markings as shown below before setting up the guidelines so that the guidelines can be overlaid to the markings. 2 m (6 ft. 7 in.) 50 cm (1 ft. 8 in.) 25 cm (9-7/8 in.
[System Language] Menu Item Description [System Language] Select the system language. [Auto Flap] Menu Item Description [Auto Flap] [On] [Off] Select whether or not to open/close the LCD panel automatically when the ignition switch is turned on or off. [Restore Settings] Menu Item Description [All Settings] Touch [Restore] to restore the settings to the default settings. CAUTION Do not turn off the engine while restoring the settings.
Description [Touch panel calibration] 1 Touch [Yes]. 2 Touch two corners of the screen along the arrows then touch the centers of the two [+] marks at the same time twice. 3 Press . The adjustment results are saved. 4 Press once again. Proceed to 16-point adjustment. 5 Gently touch the center of the [+] mark displayed on the screen. The target indicates the order. • When you press , the previous adjustment position returns. • When you press and hold , the adjustment is canceled. 6 Press and hold .
Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching or . You can use this function when [Dimmer Trigger] is set to [Time]. NOTE The time display of the dimmer duration adjusting bar depends on the clock display setting (page 105). [Driving Position] Menu Item Description [Driving Position] [Right] [Left] Setting the driving position.
Description [Brightness] [-24] to [+24] Adjust the black intensity. [Contrast] [-24] to [+24] Adjust the contrast. [Color]* [-24] to [+24] Adjust the color saturation. [Hue]* [-24] to [+24] Adjust the tone of color (which color is emphasized, red, or green). [Dimmer] [+1] to [+48] Adjust the brightness of the display. [Temperature] [-3] to [+3] Adjust the color temperature, resulting in a better white balance. * With some pictures, you cannot adjust [Hue] and [Color].
Menu Item Description [Firmware Update] CAUTION 1 Download the firmware update files into your computer. 2 Connect a blank (formatted) USB storage device to your computer then locate the correct update file and copy it onto the USB storage device. 3 Connect the USB storage device to this product (page 44). 4 Turn the source off (page 34). 5 Display the [System] setting screen (page 84). 6 Touch [System Information]. 7 Touch [Firmware Update]. 8 Touch [Continue].
Menu Item Description (custom)*1 Displays the background display image imported from the external storage device. (off ) Hides the background display. [Illumination]*2 (custom) Select the desired preset color. Displays the screen to customize the illumination color. To customize the defined color, touch then touch or to adjust the brightness and the level of red, green and blue to create favorite color.
Description [Graphic EQ] [Super Bass (S.Bass)] [Powerful] [Natural] [Vocal] [Flat] [Custom1] [Custom2] Select or customize the equalizer curve. Select a curve that you want to use as the basis of customizing then touch the frequency that you want to adjust. [Fader/Balance] Touch or to adjust the front/rear speaker balance. Set [Front] and [Rear] to [0] when using a dual speaker system. Touch or to adjust the left/right speaker balance. TIPS • If you make adjustments when a curve [S.
Description [Source Level Adjuster] [-4] to [+4] Adjust the volume level of each source to prevent radical changes in volume when switching between sources other than FM. Touch or to adjust the source volume after comparing the FM tuner volume level with the level of the source. TIP If you directly touch the area where the cursor can be moved, the SLA (source level adjustment) setting will be changed to the value of the touched point.
Description [Time Alignment] [On] [Off] Listening Position*1*2 [Off] [Front Left] [Front Right] [Front] [All] Standard Mode*3*5 [Front Left] [Front Right] [Rear Left] [Rear Right] [Subwoofer] Network Mode*3*5 [High Left] [High Right] [Mid Left] [Mid Right] [Subwoofer] Distance [0] to [140] Select or customize the time alignment settings to reflect the distance between the listener’s position and each speaker. You need to measure the distance between the head of the listener and each speaker unit.
Menu Item Description [Automatic Level Control] Corrects automatically the audio level difference between the music files or the sources. Turns the auto level control setting off. [Mode1] Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal). [Mode2] Corrects widely the audio level difference between the music files or the sources (for the wide dynamic range audio signal).
▶Before operating the Auto EQ function – The reflected sound within the vehicle is strong and delay occurs. – The LPF on active subwoofers or external amps delay the lower sounds. • If an error occurs during measurement, check the following before measuring the vehicle’s acoustics.
3 4 Turn on the ignition switch (ACC ON). If the vehicle’s air conditioner or heater is turned on, turn it off. Switch the AV source to [Source OFF] (page 34). Press Touch . then English 5 6 7 8 9 Disconnect the iPhone or smartphone device. . Touch [A-EQ&TA Measurement]. Connect the microphone for acoustical measurement (sold separately) with this product. Plug the microphone into the AUX input jack on the back panel of this product.
NOTE [Subwoofer Settings] is available only when [Subwoofer] is [On]. Press . Touch then . Touch [Crossover] or [Subwoofer Settings]. Touch or to switch the speaker. Drag the graph line to set the cutoff position. Drag the lowest point of the graph to set the cutoff slope. The following items can also be set. Switches the subwoofer phase between normal and reverse position. LPF/HPF Switches the LPF/HPF setting to [On] or [Off].
Menu Item Description [TV Aspect] Set the aspect ratio suitable for your rear display 16:9 (wide screen display) or 4:3 (regular display). (We recommend use of this function only when you want to fit the aspect ratio to the rear display.) [16:9] Displays the wide screen image (16:9) as it is (initial setting). [Letter Box] Makes the image in the shape of a letterbox with black bands on the top and bottom of the screen. [Pan Scan] Cuts the image short on the right and left sides of the screen.
Description [Parental] Set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired. 1 Touch [0] to [9] to input a four-digit code number. 2 Touch . Registers the code number, and you can now set the level. 3 Touch any number between [1] to [8] to select the desired level. The lower the level is set, the tighter the restriction is applied. 4 Touch . Sets the parental lock level.
[Video Signal Setting] Description [AV] [Auto] [PAL] [NTSC] [PALM] [PAL-N] [SECAM] Select the suitable video signal setting when you connect this product to an AV equipment. [AUX] [Auto] [PAL] [NTSC] [PALM] [PAL-N] [SECAM] Select the suitable video signal setting when you connect this product to an AUX equipment. [Camera] [Auto] [PAL] [NTSC] [PALM] [PAL-N] [SECAM] Select the suitable video signal setting when you connect this product to a rear view camera.
Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen. Creating a shortcut 1 2 Press then touch . Touch the star icon of the menu item. The star icon for the selected menu is filled in. TIP To cancel the registration, touch the star icon in the menu column again. Selecting a shortcut 1 2 3 Press then touch Touch . . Touch the menu item.
Other functions Setting the time and date Touch the current time on the screen. Touch or to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [12hour] or [24hour]. • You can change the order of date display format: Day-month, Month-day. Changing the wide screen mode You can set the screen mode for AV screen and image files. 1 Touch the screen display mode key.
[Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. NOTE [Trimming] is for image files only. NOTES • Image files can be set to either [Normal] or [Trimming] in wide screen mode. • Depending on the software version of this unit, this function may vary.
Appendix Troubleshooting Common problems A black screen is displayed, and operation is not possible using the touch panel keys. → [Power OFF] mode is on. – Press any button on this product to release the mode. Problems with the AV screen CD or DVD playback is not possible. → The disc is inserted upside down. – Insert the disc with the label upward. → The disc is dirty. – Clean the disc. → The disc is cracked or otherwise damaged. – Insert a normal, round disc.
– The operation is not possible. (For example, the DVD playing does not feature that angle, audio system, subtitle language, etc.) The picture stops (pauses) and this product cannot be operated. → The reading of data is impossible during disc playback. – Stop playback once, then restart. The picture is stretched, with an incorrect aspect ratio. → The aspect setting is incorrect for the display. – Select the appropriate setting for that image.
Black screen displayed when the vehicle is in reverse, with no camera installed. → Back camera input is set to On. – Turn the setting to Off in the settings menu. (Refer to the System Settings section of this manual to adjust.) Back image displayed when vehicle is not in reverse. → The camera polarity is not set properly in the Camera settings menu. – Review System Settings section of this manual for steps to switch the camera polarity.
Error messages When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center. Common AMP Error → This product fails to operate or the speaker connection is incorrect; the protective circuit is activated. – Check the speaker connection.
or the nearest authorized Pioneer service center for assistance. No Spotify → The Spotify application is not installed in the connected device. – Install the Spotify application in your mobile device. No Signal → The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal. – Verify that your vehicle is outdoors with a clear view of the southern sky. – Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle.
questions about your subscription package or would like to subscribe to this channel. In Canada, visit www.siriusxm.ca or call 1-877-4389677. Unplayable File → This type of file cannot be played on this product. – Select a file that can be played. Skipped → The inserted disc contains DRM protected files. – The protected files are skipped. Memory Full → The memory has become full while playback was paused. – Resume playback. Protect → All the files on the inserted disc are embedded with DRM.
– Turn the ignition switch OFF and back ON. – Disconnect the USB storage device. – Change to a different source. Then, return to the USB storage device. Skipped → The connected USB storage device contains DRM protected files. – The protected files are skipped. Protect → All the files on the connected USB storage device are embedded with DRM. – Replace the USB storage device. Incompatible USB → The connected USB storage device is not supported by this product.
iPod Android Auto Android Auto has stopped. → The connected device is not compatible with Android Auto. – Check if the device is compatible with Android Auto. → The startup of Android Auto failed for some reasons. – Disconnect the cable from the smartphone, and then connect the smartphone again after a few seconds. – Restart the smartphone. – Turn the ignition switch to OFF and then to ON.
Some basic precautions are necessary when handling your discs. Built-in drive and care • Use only conventional, fully circular discs. Do not use shaped discs. • Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the built-in drive. • Use 12-cm discs. Do not use 8-cm discs or an adapter for 8-cm discs. • When using discs that can be printed on label surfaces, check the instructions and the warnings of the discs.
Playing DualDisc Dolby Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Detailed information for playable media Compatibility Common notes about disc compatibility • Certain functions of this product may not be available for some discs. • Compatibility with all discs is not guaranteed. • It is not possible to play DVD-RAM discs.
Common notes about the USB storage device • Do not leave the USB storage device in any location with high temperatures. • Depending on the kind of the USB storage device you use, this product may not recognize the storage device or files may not be played back properly. • The text information of some audio and video files may not be correctly displayed. • File extensions must be used properly.
Media compatibility chart • Maximum playback time of audio file stored on an USB storage device: 7.5 h (450 minutes) CD-R/-RW, DVD-R/-R SL/-R DL/DVD-RW CODEC FORMAT MP3, WMA, AAC, AVI, MPEG USB storage device CODEC FORMAT MP3, WMA, WAV, AAC, FLAC, AVI, MPEG-PS, MP4, 3GP, MKV, MOV, ASF, FLV, M4V, MPEG-TS MP3 compatibility • Ver. 2.x of ID3 tag is prioritized when both Ver. 1.x and Ver. 2.x exist.
TRANSMISSION RATE USB: 8 kbps to 320 kbps (CBR)/ VBR Disc: 5 kbps to 320 kbps (CBR)/ VBR SAMPLING FREQUENCY 16 kHz to 48 kHz TRANSMISSION RATE USB: 8 kHz to 48 kHz Disc: 8 kHz to 44.1 kHz USB: 16 kbps to 320 kbps (CBR) Disc: 8 kbps to 320 kbps (CBR) FLAC compatibility SAMPLING FREQUENCY TRANSMISSION RATE EXTENSION MAX RESOLUTION AAC compatibility • This product plays back AAC files encoded by iTunes.
Maximum resolution Maximum frame rate 1 920 × 1 080 30 fps .mpg/.mpeg .m4v MPEG2 720 × 576 30 fps .divx Compatible video codec Maximum resolution Maximum frame rate DivX 720 × 576 30 fps .mp4 Compatible video codec Maximum resolution Maximum frame rate 1 920 × 1 080 30 fps MPEG4, H.264, H.263 1 920 × 1 080 30 fps Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, H.263 1 920 × 1 080 30 fps .ts/.m2ts/.
SiriusXM® Satellite Radio WMA Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc. FLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2013 Xiph.
AAC WebLink WebLink is a trademark of Abalta Technologies, Inc. Waze Waze and Waze logo are registered trademarks of Google LLC. • Pioneer accepts no responsibility for data lost from an iPod, even if that data is lost while using this product. Please back up your iPod data regularly. • Do not leave the iPod in direct sunlight for extended amounts of time. Extended exposure to direct sunlight can result in iPod malfunction due to the resulting high temperature.
App Store App Store is a service mark of Apple Inc. iOS iTunes iTunes is a trademark of Apple Inc., registered in the U.S. and other countries. Apple Music Apple Music is a trademark of Apple Inc., registered in the U.S. and other countries. Using app-based connected content Apple CarPlay Apple CarPlay is a trademark of Apple Inc.
Pandora® Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information. Spotify® SPOTIFY and the Spotify logo are among the registered trademarks of Spotify AB. Compatible mobile digital devices and premium subscription required, where available, see https://www.spotify.com.
Notice regarding MP3 file usage Using the LCD screen correctly Handling the LCD screen • When the LCD screen is subjected to direct sunlight for a long period of time, it will become very hot, resulting in possible damage to the LCD screen. When not using this product, avoid exposing it to direct sunlight as much as possible. • The LCD screen should be used within the temperature ranges shown in Specifications on page 126.
Specifications General Rated power source: 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system: Negative type Maximum current consumption: 10.0 A Dimensions (W × H × D): DIN Chassis: 178 mm × 50 mm × 160 mm (7 in. × 2 in. × 6-1/4 in.) Nose: 188 mm × 58 mm × 32 mm (7-3/8 in. × 2-1/4 in. × 1-1/4 in.) D Chassis: 178 mm × 50 mm × 165 mm (7 in. x 2 in. x 6-1/2in.) Nose: 170 mm × 46 mm × 27 mm (6-3/4 in. × 1-3/4 in. × 1 in.) Weight: 1.9 kg (4.2 lbs) 7.0 inch wide/16:9 (effective display area: 154.1 mm × 85.
Gain: +10 dB to -24 dB (1 dB/step) Phase: Normal/Reverse Time alignment: 0 to 140 step (1 inch/step) Bass boost: Gain: +12 dB to 0 dB (2 dB/step) Speaker level: +10 dB to -24 dB (1 dB/step) DVD drive System: DVD-V, VCD, CD, MP3, WMA, AAC, DivX, MPEG player Usable discs: DVD-VIDEO, VIDEO-CD, CD, CD-R, CDRW, DVD-R, DVD-RW, DVD-R DL Region number: 1 Signal Format: Sampling frequency: 8 kHz/16 kHz/32 kHz/44.
MPEG video decoding format: MPEG-1, MPEG-2, MPEG-4 (part2), MSMPEG-4 (ver. 3) Bluetooth Version: Bluetooth 4.1 certified Output power: +4 dBm Max. (Power class 2) Frequency band(s): 2 400 MHz to 2 483.5 MHz FM tuner Frequency range: 87.9 MHz to 107.9 MHz Usable sensitivity: 12 dBf (1.
CEA2006 Specifications English Power output: 14 W RMS × 4 Channels (4 Ω and < = 1% THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) NOTE Specifications and design are subject to possible modifications without notice due to improvements.
© 2019 PIONEER CORPORATION. All rights reserved.
