Owner's Manual

Precaution
!) Checking part names and functions on page 7
Settings and recorded contents are reset to the factory settings.
This manual uses diagrams of actual screens to describe opera-
tions. However, the screens on some units may not match those
shown in this manual depending on the model used.
Meanings of Symbols Used in This
Manual
MtiiiiJ:IM This indicates model name that are supported
the described operations.
~ This indicates to touch an appropriate soft key
V on the touch screen.
This indicates to
touch and hold an appropriate
soft
key on the touch screen.
This indicates
that there is a reference or
supplementary
for the key or screen.
Basic operation
1 RESET
!)
Resetting the microprocessor on page 6
button
2 Volume(+/-) button
3
MUTE Press to switch the mute setting to on or off.
button
4
:: button
Press to switch the display between the top
menu screen and the
current source screen.
5
DISP
Press to turn the display on or off.
button
6
TRK(~
Performs manual seek tuning, fast forward,
~)
reverse and track search controls.
button
Press to answer or end a call.
7
..&. button
8
Disc-
!)
Inserting and ejecting a disc on page 7
loadmg
slot
9
LCD screen
The remote control CD-R33
is sold separately.
For details concerning operations, see the remote control
manual.
ACAUTION
Do not insert anything other than a disc into the disc-loading
slot.
Inserting and ejecting a disc
Inserting a disc
1 Insert a disc into the disc-loading slot.
Ejecting a disc
1 Press~ button to eject a disc.
Plugging and unplugging a USB stor-
age device
0 This product may not achieve optimum performance with
some USB storage devices.
0 Connection via a USB hub
is not possible.
0 A USB cable
is required for connection.
Pull out the plug from the USB port of the USB
cable.
2 Plug a
USB storage device into the USB cable.
CD USB cable
0 USB storage device
mi Check that no data is being accessed before pulling out the
USB storage device.
1 Start the engine to boot up the system.
7