Manual

2 Install this unit and fasten the screws.
1
2
1 Dashboard
2 Screw (3 mm × 6 mm)
(Supplied with this unit)
3 Attach the trim ring.
1
1 Trim ring
(Supplied with this unit)
Installation using the screw
holes on the side of the unit
1 Remove the side brackets.
1
2
1 Side bracket
(Supplied with this unit)
2 Screw for fixing the side bracket
(5 mm×9 mm)
(Supplied with this unit)
2 Fastening the unit to the factory radio-
mounting bracket.
En
10
Section
02
Installation