VSX-832 AV RECEIVER Instruction Manual Mode d’emploi Manual de instrucciones Manuale di istruzioni Bedienungsanleitung Gebruikershandleiding Grundläggande bruksanvisning En Fr Es It De Nl Sv
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Table of Contents Before Start Before Start ............................................................ 2 What's in the box ..................................................... 3 Part Names ............................................................ 4 Part Names ............................................................. 4 Install ...................................................
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others What's in the box 1. Main unit (1) 2. Remote controller (RC-957R) (1), batteries (AAA/R03) (2) 3. Speaker setup microphone (1) 0 Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 1 0 Quick Start Guide (1) * This document is an online instruction manual. It is not included as an accessory. 2 3 4 5 0 Connect speakers with 4 ≠ to 16 ≠ impedance.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Part Names Part Names Front Panel 1. INPUT SELECTOR dial: Switches the input to be played. 2. MCACC indicator: This lights when you have enabled the speaker calibration made with MCACC (P20). 3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the display off. 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others diameter). 17.MCACC SETUP MIC jack: Connect the supplied speaker setup microphone. 18.Listening mode buttons: Press "AUTO/DIRECT", "SURROUND" or "STEREO" to switch the listening mode(P35). 19.SOUND RETRIEVER button: Turn on or off Sound Retriever which improves the quality of compressed audio. 20.PURE DIRECT button: Used to switch to the Pure Direct mode (P35). 21.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 90° 180° Rear Panel 1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. VIDEO IN jacks: Input the video signals of an AV component with an analog video cable. 3. NETWORK jack: Connect to the network with an Ethernet cable. 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Remote Controller 1. Í STANDBY/ON button 2. Input selector buttons: Switches the input to be played. 3. 21 buttons: Select the input to be played. 4. (AV ADJUST) button: Settings such as "Tone" and "Level" can be made quickly during play on the TV screen (P61).
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Installation procedure Install This unit can be used in a number of ways, depending on the layout of the speakers you are installing, and the connections made to external devices. Read the following to help make the installation process smoother.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Step1: Speaker Layout 5.1 Channel System Front speakers output front stereo sound and the center speaker outputs sounds emanating from the center of the screen, such as dialog and vocals. Surround speakers create the sound field at the rear. The powered subwoofer reproduces bass sounds and enriches the sound field.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 3.1.2 Channel System-1 (Front High Speakers) 3´ (0.9 m) or more ＊1 This is a 3.1-channel system consisting of front speakers, a center speaker, and a powered subwoofer, with the addition of front high speakers, a type of height speaker. Front high speakers should be situated at least 3y/0.9 m higher than the front speakers.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 3.1.2 Channel System-2 (Ceiling Speakers) ＊1 This is a 3.1-channel system consisting of front speakers, a center speaker, and a powered subwoofer, with the addition of top middle speakers, a type of height speaker. Fit top middle speakers on the ceiling directly above the listening position. The distance between each pair should match the distance between the two front speakers.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 3.1.2 Channel System-3 (Dolby Enabled Speakers (Dolby Speakers)) ＊1 This is a 3.1-channel system consisting of front speakers, a center speaker, and a powered subwoofer, with the addition of Dolby enabled speakers (front), a type of height speaker.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Speaker combinations Speaker Channels FRONT CENTER SURROUND HEIGHT 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch 3.1.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Step2: Connect the Speakers Make correct connection between the unit's jacks and speaker's jacks (+ to + and - to -) for each channel. If connection is wrong, reverse phase may make bass output poor. 1/2˝ (12 mm) b a Speaker cable, b Subwoofer cable 14 Setup 0 Settings for the speaker configuration you have connected need to be made in "1. Full Auto MCACC" in Initial Setup (P20).
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Step3: Connect the TV & AV Components 1. Connect the TV To ARC TV For a TV that supports the ARC (Audio Return Channel) feature (*), use an HDMI cable and connect according to illustration "a". Choose an HDMI IN jack on the TV that supports ARC when connecting. Setup 0 Settings are required to use the ARC function. For "4. Audio Return Channel" (P21) in Initial Setup, select "Yes".
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 2. Connect the HDMI AV Component This is an example of connection with an AV component that has an HDMI jack.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 3. Connect the Non-HDMI AV Component This is an example of connection with an AV component that does not have an HDMI jack. Select the cables to make the connections to the AV component to match the jacks it has.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 4. Connect the Audio Component Example of a connection with an AV component. Use a digital coaxial cable to connect a CD player.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 5. Connect Other Cables (North American models) (European, Australian and Asian models) Antenna Hookup Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the FM indoor antenna to a wall. Network Hookup a a d Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN).
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Initial Setup with Auto Start-up Wizard Initial Setup Initial Setup starts automatically 1 When you turn the unit on for the first time after purchasing it, Initial Setup is automatically shown on the TV to enable you to make settings required for startup using simple operations following onscreen guidance. 1. Switch the input on the TV to that assigned to the unit. 2.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others environment of the room. 0 Calibration takes between 3 and 12 minutes to be completed. The speakers emit the test tone at high volume during measurement, so be careful of your surroundings. Also, keep the room as quiet as possible during measurement. 0 If you have connected a subwoofer, check the power and volume of the subwoofer. Set the subwoofer volume to more than halfway.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others AV Component Playback Playback 1 2 INPUT TV Basic operations You can play the audio from AV components such as Blu-ray Disc players through this unit. Perform the following procedure when the unit is on. 1. Switch the input on the TV to that assigned to the unit. 2.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others BLUETOOTH® Playback 1 2 3 Pioneer VSX-832 XXX You can wirelessly play music on a smartphone or other BLUETOOTH wireless technology enabled device. Perform the following procedure when the unit is on. Pairing 1. When you press the button, "Now Pairing..." is displayed on this unit's display, and the pairing mode is enabled. 2.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Internet Radio 1 2 3 INPUT TV You can use internet radio services such as TuneIn Radio, Pandora, Deezer, and TIDAL by connecting this unit to a network that has an internet connection. 0 The network needs to be connected to the internet in order to play internet radio services. 0 Depending on the internet radio service, the user may need to register from their computer first.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others are displayed in the level under TuneIn Radio. To display a radio station registered in "My Presets", you must log into TuneIn Radio from the unit. To log in, select "Login" - "I have a TuneIn account" in the "TuneIn Radio" top list on the unit, and then enter your user name and password.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Spotify 1 2 3 4 Wi-Fi Device Devices Available Spotify Connect play is possible by connecting this unit to the same network as a smart phone or tablet. 0 To play Spotify Connect, you need to install the Spotify application on your smartphone or tablet. You also need to create a Spotify premium account. – Refer to the following for Spotify settings: www.spotify.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others AirPlay® 1 2 Wi-Fi 3 2 4 iPhone Pioneer VSX-832 XXXXXX e.g., iOS 10 Basic operations You can wirelessly enjoy the music files on an iPhone®, iPod touch®, or iPad® connected to the same access point as this unit. 0 Update the OS version on your iOS device to the latest version.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others USB Storage Device 1 2 3 4 INPUT TV Basic operations You can play music files stored on a USB storage device. Perform the following procedure when the unit is on. 1. Switch the input on the TV to that assigned to the unit. 2. Plug your USB storage device with the music files into the USB port either on the front panel or rear panel of this unit. 3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Listening To the AM/FM Radio 1 You can receive FM and AM radio stations on this unit with the built-in tuner. Perform the following procedure when the unit is on. ∫ Tuning into a Radio Station Tuning Automatically 1. Repeatedly press TUNER (a) on the remote controller and select "AM" or "FM". 2. Press MODE (e) on the remote controller so that "TunMode:Auto" appears on the display. 3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 1 ∫ Registering a station You can register up to 40 of your favorite AM/FM radio stations. Registering After tuning into the AM/FM radio station you want to register, perform the following procedure. 1. Press +Fav (d) on the remote controller so that the preset number on the display flashes. 2.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 The information displayed may sometimes not match the content being broadcast by the station. 3. When a station is found, the station flashes on the display. Press ENTER while this is happening to start receiving that station. If you don't press ENTER, the unit continues to search for another station. 0 If no stations are found, the message "Not Found" is displayed.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Music Server 1 2 3 INPUT TV It is possible to stream music files stored on PCs or NAS devices connected to the same network as this unit. 0 The network servers compatible with the Music Server feature are those PCs with players installed that have the server functionality of Windows Media® Player 11 or 12, or NAS that are compatible with home network functionality.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 To return to the previous screen, press (c). 0 If "No Item." is displayed, check whether the network is properly connected. 0 Depending on the server and share settings, the unit may not recognize it, or may not be able to play its music files. Furthermore, the unit cannot access pictures and videos stored on servers.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Supplementary information for player functions Due to firmware (the software for the system) updates after you make your purchase or firmware changes during production of the product, there may be additions or changes to the features available compared to what is in the instruction manual.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Listening Mode Selecting Listening Modes This unit has a variety of listening modes. You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO". AUTO/DIRECT button (a) Press repeatedly and the listening modes suited to the input signal are switched between "Auto Surround", "Direct", and "Pure Direct".
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Checking the input format and listening mode Listening Mode Effects Press (b) on the remote controller several times to switch the display of the main unit as follows. Updating of listening modes We plan to provide support for the Dolby Atmos audio format through firmware updates for this unit. This means that the selectable listening modes depend on the version of firmware.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others configuration when the input signal is 2 channel. Broadening the sound field provides you with a seamless sound with more depth and realism. Along with CD and movie sources, games can also benefit from the vivid sound localization. Choose from a mode ideal for movies (Movie), a mode ideal for music (Music), and a mode ideal for gaming (Game).
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others DTS:X This mode faithfully reproduces the sound design recorded in the DTS:X format. The DTS:X audio format is a combination of the mixing methodology based on past channel based formats and object based dynamic audio mixing, and it is characterized by the precise positioning of sounds and the ability to express movement.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Input format Listening Mode Input format Listening Mode Input format Listening Mode Analog Stereo PCM Music files (except DSD/ Dolby TrueHD) Stereo Multich PCM Stereo Mono PCM*1 Dolby Surround Dolby Surround Surround Enhancer Surround Enhancer Surround Enhancer PL II Movie*1 PL II Movie*1 DTS Neural:X PL II Music*1 PL II Music*1 Classical*2 PL II Game*1 PL II
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Input format Listening Mode Input format Listening Mode Input format Listening Mode DSD Stereo Dolby Atmos Stereo Dolby D Stereo DSD*1*2 Dolby Atmos Dolby D*1*2 Dolby Surround Surround Enhancer Dolby Surround Surround Enhancer Classical Surround Enhancer PL II Movie*3 Unplugged PL II Movie*3 PL II Music*3 Ent.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Input format Listening Mode Input format Listening Mode Input format Listening Mode Dolby D+ Stereo Dolby TrueHD Stereo DTS Stereo Dolby D+*1*2*3 Dolby Dolby Surround Surround Enhancer PL II Movie*4 Classical*3 Unplugged*3 Movie*3 Ent.Show*3 Drama*3 Game*3 Classical*4 AdvancedGame*3 Unplugged*4 Action*3 Ent.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Input format Listening Mode Input format Listening Mode Input format Listening Mode DTS 96/24 Stereo DTS Express Stereo DTS-HD HR Stereo DTS 96/24*1*2 DTS Express*1*2 DTS-HD HR*1*2 DTS Neural:X DTS Neural:X DTS Neural:X Classical*3 Classical*3 Classical*3 Unplugged*3 Unplugged*3 Unplugged*3 Ent.Show*3 Ent.Show*3 Ent.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Input format Listening Mode Input format Listening Mode DTS-HD MSTR Stereo DTS:X Stereo DTS-HD MSTR*1*2 DTS:X DTS Neural:X Classical*1 Classical*3 Unplugged*1 Unplugged*3 Ent.Show*1 Ent.Show*3 Drama*1 Drama*3 AdvancedGame*1 AdvancedGame*3 Action*1 Action*3 Rock/Pop*1 Rock/Pop*3 Sports*1 Sports*3 Ext.Stereo*2 Ext.Stereo*4 Ext.Mono*2 Ext.Mono*4 F.S.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others System Setup Advanced Setup The unit allows you to configure advanced settings to provide you with an even better experience. 1. Switch the input on the TV to that assigned to the unit. 2. Press on the remote controller to display the Home screen. 1 INPUT TV 2 3. With the cursors on the remote controller, select "System Setup", and then press ENTER. 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Impose OSD Screen Saver Set whether or not to display the information on the TV when the volume is adjusted or input is changed, for example. "On (default value)": Display OSD on the TV "Off": Do not display OSD on the TV 0 OSD may not be displayed depending on the input signal even if "On" is selected.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others ∫ Analog Audio Input TV You can change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---". Set whether to skip the TV input selector. Select "Skip" to skip this input. (Default Value is "Use") TUNER Set whether to skip the TUNER input selector. Select "Skip" to skip this input.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Speaker Impedance Set the impedance (≠) of the connected speakers. "4ohms": When any of the connected speakers have 4 ≠ or more to less than 6 ≠ impedance "6ohms (default value)": When the connected speakers all have 6 ≠ or more impedance 0 For impedance, check the indications on the back of the speakers or their instruction manual.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Front Left Specify the distance between each speaker and the listening position. (Default Value is "10.0 ft/3.00 m") Center Specify the distance between each speaker and the listening position. (Default Value is "10.0 ft/3.00 m") Front Right Specify the distance between each speaker and the listening position. (Default Value is "10.0 ft/3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Power On Level Set the volume level of when the power is turned on. Select "Last (default value)" (volume level before entering standby mode), "-¶dB", "-81.5 dB" to "+18.0 dB". 0 You cannot set a higher value than that of "Volume Limit". Headphone Level Adjust the output level of the headphones. Select from "12.0 dB" to "+12.0 dB". (Default Value is "0.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 To name a preset radio station, press TUNER on the remote controller, select AM/FM and select the preset number. 0 It cannot be set if the "NET", "USB" or "BLUETOOTH" input is selected.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Hardware HDMI Standby Through ∫ HDMI HDMI CEC Setting to "On" enables the input selection link and other link functions with HDMI connected CEC compliant device. "On": When this function is to be used "Off (default value)": When this function is not to be used When changing this setting, turn off and then on again the power of all connected components.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Audio TV Out You can enjoy audio through the speakers of the TV while this unit is on. "On": When this function is to be used "Off (default value)": When this function is not to be used 0 The setting is fixed to "Auto" if "HDMI CEC" is set to "On".
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Network Standby Bluetooth Wakeup When this feature is turned "On (default value)", you can turn on the power of the unit via the network using an application that can control this unit.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others feature is started. ∫ Initial Setup You can make the Initial Setup from the System Setup menu. 0 Wait for a while if "Initial Setup" cannot be selected. It will appear when the network feature is started. ∫ Lock Setup Parameter 54 Lock the Setup menu to protect the settings. "Locked": The menu is locked.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others MCACC Setup the speakers automatically or make desired changes to the equalizer. You can also check the values set currently for each speaker setting. 1. Switch the input on the TV to that assigned to the unit. 2. Press on the remote controller to display the Home screen. 1 INPUT TV 2 3. With the cursors on the remote controller, select "MCACC", and then press ENTER. 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Front Left After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" with / . (Default Value is "0.0 dB") 0 "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" - "Crossover" (P47).
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others setting. 0 If you want to make the adjustments while listening to something, press on the remote controller, and select the Preset you want to adjust in "AV Adjust" - "MCACC" - "Manual EQ Select" (P61) first. MCACC Data Check You can check the number of speaker channels connected and the content and values you have set for each of the speaker settings.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Network/Bluetooth Make settings related to network connections and BLUETOOTH. 1. Switch the input on the TV to that assigned to the unit. 2. Press on the remote controller to display the Home screen. 1 INPUT TV 2 3. With the cursors on the remote controller, select "Network/Bluetooth", and then press ENTER. 4.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Wi-Fi Status The information for the connected access point is displayed. "SSID": The SSID of the connected access point "Signal": The signal strength of the connected access point "Status": The status of the connected access point MAC Address This is the MAC address of the AV receiver. This value is specific to the component and cannot be changed.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Usage Data Network Check As a means of improving the quality of our products and services, we may collect information about your usage over the network. Select "Yes" if you agree to our collecting this information. Select "No" if you do not want us to collect this information. (Default Value is "No") You can set this after confirming the Privacy Policy.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others AV Adjust 1 By pressing the button on the remote controller during play, you can adjust frequently used settings, such as the sound quality, using on-screen menus. Note that there is no display on the TV screen when the input selector is "CD", "TV", "FM", or "AM", so follow the display on the main unit while doing the operations. 1.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others MCACC" - "EQ Adjust" (P55) in the Home screen. The same sound field setting is applied all ranges when set to "Off". 0 It cannot be set if the listening mode is Pure Direct. Phase Control: Correct phase disturbance in the low range to enhance the bass. This enables you to achieve powerful bass reproduction that is faithful to the original sound.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Web Setup You can make the settings for network features for this unit in an internet browser on a PC, smartphone, etc. 1. Press on the remote controller to display the Home screen. 2. Select "Network/Bluetooth" - "Network" with the cursors, then take a note of the IP address displayed in "IP Address". 3.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Firmware Update The updating function on this unit How to update Updating the Firmware via Network This unit has functionality to update the firmware (the system software) over a network or by the USB port. This enables us to make improvements to a variety of operations and to add features. There are two methods for updating the firmware: via network and via USB.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 4. Press ENTER with "Update" selected to start update. 0 During the update, the TV screen may go black depending on the updated program. In that case, check the progress on the display of the unit. The TV screen will remain black until the update is complete and the power is turned on again. 0 "Completed!" is displayed when the update is complete. 5.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 Do not use Í on the remote controller. If an Error Message is Displayed: When an error occurs, "¢-¢¢ Error!" is displayed on the display of the unit. ("¢" represents an alphanumeric character.) Check the following: 0 ¢-01, ¢-10: USB storage device not found. Check whether the USB storage device or USB cable is correctly inserted to the USB port of this unit.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Supplementary Information Supplementary Information Due to firmware (the software for the system) updates after you make your purchase or firmware changes during production of the product, there may be additions or changes to the settings and operation available compared to what is in the instruction manual.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Troubleshooting Others Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 Confirm that the connection between the output jack on the device and the input jack on this unit is correct. 0 Make sure that none of the connecting cables are bent, twisted, or damaged. 0 If the indicator on the display flashes, press on the remote controller to cancel muting. 0 While headphones are connected to the PHONES jack, no sound is output from the speakers.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others playback DTS material properly even though your player is digitally connected to this unit. This is usually because the DTS signal has been processed (e.g., output level, sampling rate, or frequency response changed) and the unit does not recognize it as a genuine DTS signal. In such cases, you may hear noise.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 Depending on the characteristics or specifications of your BLUETOOTH wireless technology enabled device, playback on this unit may not be possible. Sound is interrupted 0 There may be a problem with the BLUETOOTH wireless technology enabled device. Check the information on the internet.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others work 0 You may not receive radio waves due to bad radio wave conditions. Shorten the distance from the wireless LAN router or remove obstacles to improve visibility, and try again. Place the unit away from microwave ovens or other access points. It is recommended to place the wireless LAN router and the unit in the same room.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others General Specifications Amplifier (Audio) section Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 2020,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Surround Mode Output Power (*) (6 ohms, 1 kHz THD 0.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Channel, 3D, 4K 60Hz, CEC, Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601), Content Type, HDR Audio Format Dolby Atmos (to be supported in a future update), Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-HD Express, DSD, PCM Maximum Video Resolution 4k 60 Hz (YCbCr 4:4:4) Video Inputs Composite IN1 (
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Reference Information About HDMI Compatible functions HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others AIFF files include uncompressed PCM digital audio. 0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz 0 Quantization bit: 8 bit, 16 bit, 24 bit AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/ .3G2): 0 Supported formats: MPEG-2/MPEG-4 Audio 0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 Media inserted to the USB card reader may not be available in this function. Furthermore, depending on the USB storage device, proper reading of the contents may not be possible. 0 We accept no responsibility whatsoever for the loss or damage to data stored on a USB storage device when that device is used with this unit.
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others License and Trademark PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Pro Logic, Dolby Surround, Dolby Vision and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com.
1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 JAPAN 18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A.
