Owner's Manual

Customizing preferences
11
Chapter
46
En
Equalizer curve
S.Bass (Super Bass) is a curve in which only low-
pitched sound is boosted.
Powerful (default) is a curve in which low-pitched and
high-pitched sounds are boosted.
Natural is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat is a flat curve in which nothing is boosted.
Custom1 is an adjusted equalizer curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2 is an adjusted equalizer curve that you cre-
ate. If you select this curve, the effect is applied to all
audio sources.
p When “Flat” is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
“Flat” and a set equalizer curve.
1 Display the “Audio” screen.
Ü For details, refer to Customizing the audio
settings on page 45.
2 Tap [Graphic EQ].
3 Tap the equalizer curve you want.
Adjusting the 5-band graphic equalizer
You can adjust the level of each band for the
equalizer curves.
p A separate “Custom1” curve can be creat-
ed for each source. If you make adjust-
ments when a curve other than “Custom2”
is selected, the equalizer curve settings will
be recorded in “Custom1”.
p A “Custom2” curve that is common for all
sources can be created. If you make adjust-
ments when the “Custom2” curve is se-
lected, the “Custom2” curve will be updat-
ed.
1 Display the “Audio” screen.
Ü For details, refer to Customizing the audio
settings on page 45.
2 Tap [Graphic EQ].
3 Tap one of the keys to select a curve
that you want to use as the basis of cus-
tomizing.
4 Tap the frequency that you want to ad-
just the level for.
You can select the following frequencies:
100Hz — 315Hz — 1.25kHz — 3.15kHz —
8kHz
5 Tap the screen to adjust the level of the
equalizer band.
You can adjust the equalizer band level be-
tween “+12dB” and “–12dB”.